I was just curious what my Atlantis v2 mega should sub ohm at? Any answers will help Thank you.
I'm new to the whole vaping thing but today I just went out and bought an istick 50w and the v2 mega and I have .5 coils in and it says it's at .7 ohms is that bad?Hello and welcome to the forum @Landin1102. Glad to have you here!
Here are Aspires recommended ranges for the Atlantis v2 coils (these may be printed on the coil).
1. 20-30W (0.5Ω coil)
2. 40-50W (1Ω coil)
3. 70-80W (0.3Ω coil)
Just because these may be recommended does not automatically mean you should stick to these ranges. Whenever trying a new coil, start out low and slowly raise you wattage. If you start to get a "dry hit" back your wattage down a notch or two.
Make sure you prime the coil well when you first use a new coil.
It's not unusual for a coil to be off by 0.1Ω. But even if it is off by 0.2Ω it still is safe to use.I'm new to the whole vaping thing but today I just went out and bought an istick 50w and the v2 mega and I have .5 coils in and it says it's at .7 ohms is that bad?
Is there a way I can get it to read right?It's not unusual for a coil to be off by 0.1Ω. But even if it is off by 0.2Ω it still is safe to use.
OK Thanks for the help!The ohms will go up as the coil "gunks" up with caramelized juice that is deposited on the coil. How fast this happens depends on how much juice you vaporize using the coil. High VG, dark color, sweet flavors will "gunk" up a coil faster than lower VG, light color juice.
When you notice that your flavors become muted and you are not getting as much vapor as you once were it's time to install a new coil.
I'm using an istick 50w and I just tried taking it apart and cleaning it and it's still at .7Just a tip, if it jumps to say .8, I'd lower the wattage or you could get dry hits, is it a new coil ? Sometimes, unscrewing the tank off, take the coil out, give it a clean and screw it all back together solves the issue.. I used to have this problem a lot more on the Isticks than any other mod, what mod are you using ?
Pretty common with the Isticks Im afraid, you can either live with it or upgrade your mod Personally I have no love for the Istick 50w, a mod with separate batteries and a charger is the way I would go...and have gone..I'm using an istick 50w and I just tried taking it apart and cleaning it and it's still at .7
I would but I blew 150 on a bunch of juice and the battery and take and extra coils. Thanks for letting me know this is a normal thing tho.Pretty common with the Isticks Im afraid, you can either live with it or upgrade your mod Personally I have no love for the Istick 50w, a mod with separate batteries and a charger is the way I would go...and have gone..
The tank isnt the problem, the coils will still read a slight difference on the Istick 50wIs there any specific tanks you could recommend for this mod?
I know but I mean like is there a tank you would recommend for this mod as in one that would work well with it.The tank isnt the problem, the coils will still read a slight difference on the Istick 50w