Atmizoo Roller/Dingo Chat, Tips, and Release Dates
- Thread starter b0redagain
- Start date
- th_trl_thread_readers 0
-
- Tags
- atmizoo dingo mechanical mod roller
- Status
Hehe You just threw in the pic of the Nemesis to tease me and Porkchopharry. J/K Man new month coming up and my budget resets, can't wait for the next release. I'm torn between the polished or the K.W. edition. I might pick up a diver since everyone is saying how good it is.
Why don't you use the Roller's recessed 510 connector, instead of the original raised one?
That is the recessed connection. What you are seeing is the flange on the Diver. Atmistique is making some without the flange this week which will remedy the issue.
Mine should be arriving in the next couple days! I will post a couple pics up when it gets here.
I must say Atmizoo has some excellent customer service. I have received a few emails since ordering informing how to handle and take care of it. As well as a warning from them how DHL will try to bend me over with brokerage fees and how to handle it. Very satisfied with them and haven't even received my device yet.
Hello Bryan,
thank you so much for placing this order
We are contacting you just to share a piece of information in relation to this orders delivery, that might be useful to you.
We are aware that DHL Canada charges brokerage fees for customs clearance procedures, even if the corresponding under clearance parcel has *no* customs fees. According to what we know, there are *no* customs taxes whatsoever for incoming e-cigs. In any case, please be aware that you have the right to complete the customs clearance on your own, without paying any brokerage fees to a courier company. So, we strongly suggest that you contact your local DHL office as soon as you receive your tracking number and ask them to inform you about their charges, given the above or state them that you wish to complete the procedure on your own. We hope for your discretion about the source of the aforementioned issue and we would really appreciate your feedback, trying to ensure better services for our customers!
Regards
Taz
Team Atmizone
That's the email I received. After being bounced around by DHL reps on the phone and put to voicemail twice I finally was told there would be 0 brokerage fee.
thank you so much for placing this order
We are contacting you just to share a piece of information in relation to this orders delivery, that might be useful to you.
We are aware that DHL Canada charges brokerage fees for customs clearance procedures, even if the corresponding under clearance parcel has *no* customs fees. According to what we know, there are *no* customs taxes whatsoever for incoming e-cigs. In any case, please be aware that you have the right to complete the customs clearance on your own, without paying any brokerage fees to a courier company. So, we strongly suggest that you contact your local DHL office as soon as you receive your tracking number and ask them to inform you about their charges, given the above or state them that you wish to complete the procedure on your own. We hope for your discretion about the source of the aforementioned issue and we would really appreciate your feedback, trying to ensure better services for our customers!
Regards
Taz
Team Atmizone
That's the email I received. After being bounced around by DHL reps on the phone and put to voicemail twice I finally was told there would be 0 brokerage fee.
Ordered a Roller on the 25th and it's out for delivery today in LA. That DHL tracking info is impressive.
Haven't had vape mail in a while!
Haven't had vape mail in a while!
***
Ordered one not too long ago, the Atmizoo Roller SS-P
Hope to have it by this Saturday ...
The Wait Goes On ...
Ordered one not too long ago, the Atmizoo Roller SS-P
Hope to have it by this Saturday ...
The Wait Goes On ...
He's always teasing with the Nemesis. heh. I'm going for the polished version. I need a good fingerprint magnet. Still undecided if I will get one this release or not. I can't believe I'm exhibiting some restraint. I want that thing so bad. I just might be able to put that money to better use right now though. We shall see. After I eventually get the nemesis, I'm going to start getting some real RBA's and such and see what I like. Kayfun makes me a bit hot.
And what would those be?
______________________________
I ask b'coz I'm myself on the lookout for some.
Any idea when the next release of the nemesis will be?
For those if you that have both the nemesis and the roller, which is your favorite? I really want both, but money is tight.
Sent from my SGH-T989 using Xparent BlueTapatalk 2
I guess I should have worded that differently to be honest. I want to check out some Kayfuns, the GKMF20 (on the list), Senesis, DID, yada, yada. Maybe I should have said non-clone. I've spent some time and money checking out and getting some nice mechanicals and PVs in general and always used cheaper toppers. I'd like to see if some "better" made toppers offer me a better experience? Or maybe if they work correctly and last, that is part of the experience? To be honest I do not know if there is a difference between say a $300 Kayfun and a $30 RSST, or a $200 DID. But I would like to see. And if there isn't, well I can sell them. The RSST is cool, but inconsistent, especially on the threading front. But it is better than the AGA IMHO. But I'm sure there are better. Once you have a mod that you like, it's really just kind of a tube right? The best vape comes from the device that sits on top? I've kind of neglected that part.
Looking at all the shiney tubes...Dunno if any of that made sense? I'm just on a little journey to be honest in the 6 months since I've quit smoking. Kind of keeps me busy? I buy some stuff, sell some stuff, keep the stuff I really dig.
I am going to get one of the Richman Rebuildables and a Terminator though to mess with. So maybe the Terminator will be the next logical step before I spend $300 on a Kayfun?
^I'm going the Richman, ZAU, GP-SnP and GP-Spheroid way. I hope that'd fit the bill.
____________________________________
Currently own the RSST & Aga-T2.2. Was about to get the UD-AGI but dropped.
____________________________________
Currently own the RSST & Aga-T2.2. Was about to get the UD-AGI but dropped.
Last edited:
I got the roller today and I absolutely love it!
The form factor in 18350 mode is perfect that I doubt I'll use it any other way. Once I found the flush 510 connector, swapped it in, and removed the rubber washer from the center pole, my atomizer fits beautifully. And that button is a wet dream. When I think of all the hours I spent trying get my zenesis button to fire by grinding it into different angles I want to cry.
Roller with Mini B
Only regret is that I wish I ordered two to save on shipping. Bravo Atmizoo. Job well done!
The form factor in 18350 mode is perfect that I doubt I'll use it any other way. Once I found the flush 510 connector, swapped it in, and removed the rubber washer from the center pole, my atomizer fits beautifully. And that button is a wet dream. When I think of all the hours I spent trying get my zenesis button to fire by grinding it into different angles I want to cry.
Roller with Mini B
Only regret is that I wish I ordered two to save on shipping. Bravo Atmizoo. Job well done!
- Status
Similar threads
- Locked
