Atmizoo Roller/Dingo Chat, Tips, and Release Dates

[Fury83]

I think I'll agree. These are the two that I've wanted the most and now I have both. I may have to sell the EA mod now though...but I don't think that will hurt.

You know, I really wanted another Roller, since I miss mine. Then I remembered I have an Astro coming, a BAM coming, an ELA coming, a Sturm coming and some AFPVs coming. I figured I should probably wait at least a few of those out before going forward on another roller.


or maybe I have a problem.

 

[b0redagain]

Your right the inner diameter would be the main culprit. This is where telescopic tubes one-up solid tubes, but solid tubes look so good. Knowing me if I get the roller tubes I would get the inner tube SS-P for that slight bit of contrast, and keep the rest of the mod Matte. Probably order a SS-P button to top things off.

You could also get the fixed tube look using the 18350 extension with the telescopic tube. Similar to the below picture with the Kick extension but obviously longer. If you screw it all the way together it will hold an 18650 or 18500 with a Kick and not look telescopic. If we can find someone with a Roller and an 18350 extension maybe they could demonstrate.

The only issue that you could run into is that if you buy them all separately you may run in to the below issue as the finishes vary. If you buy it all together they can match them up before shipping.

 

[Larzis]

You know, I really wanted another Roller, since I miss mine. Then I remembered I have an Astro coming, a BAM coming, an ELA coming, a Sturm coming and some AFPVs coming. I figured I should probably wait at least a few of those out before going forward on another roller.


or maybe I have a problem.

I may have the same problem. Totally happy with what I have, say not buying anything else!

Except that.
O and that!
And that is just too good of a deal, gotta get that too.

 

[Fury83]

I may have the same problem. Totally happy with what I have, say not buying anything else!

Except that.
O and that!
And that is just too good of a deal, gotta get that too.

I was totally happy last week then this week behold a Sturm/Line/BAM/ZAP 2.1



Sent from my Galaxy Nexus using Tapatalk 2

 

[b0redagain]

Does anyone use a Terminator/Nautilus with their Roller or Dingo? Care to share a pic?

 

[Baseline]

My button is stuck on my roller and it seems like it won't go all the way down when i try to disassemble it to clean. I can't remove the unit from the external housing. Any suggestions?

 

[M3RkN]

My button is stuck on my roller and it seems like it won't go all the way down when i try to disassemble it to clean. I can't remove the unit from the external housing. Any suggestions?

You have somehow dislodged the ball bearing, and or forced the button out of its track. Try rotating the button mount until its fully depressesed to release the internals. Did you follow this guide? Support - Roller / Dingo | atmizoo vaping modware

 

[b0redagain]

Awesome deal on a like new Roller.

 

[b0redagain]

8 more hours until the next release.

Next release on Tuesday April 30, 0800 GMT (0900 UK time). Zoo animals Dingos and Rollers *and* the Hive nest will be waiting - plus some spare parts. New springs included, some easy-twist buttons as well!

 

[donnah]

Awesome deal on a like new Roller.

Missed it! That was a great deal! I'm on the hunt for the Eric's edition 69. If you see one and I'm on the forum, pm me!

 

[b0redagain]

Missed it! That was a great deal! I'm on the hunt for the Eric's edition 69. If you see one and I'm on the forum, pm me!

Just picked one up in the classies...so now that I have mine I'll be sure to help you out.

 

[donnah]

Just picked one up in the classies...so now that I have mine I'll be sure to help you out.

I don't really want both the Roller and the 69 (well I do..) I should have snagged the 69 when Finnvape had them but right when I decided... the Eric's edition went out of stock, then when I was hem hawing about the polished... it finally got gone every where also. I've been stalking the Finnvape site.

 

[b0redagain]

Shouldn't be too much longer before Vaperev has both the Roller and the 69 in stock.

 

[donnah]

Shouldn't be too much longer before Vaperev has both the Roller and the 69 in stock.

I'm watching them too but they're a bit more expensive than finnvape. Does anyone know what the shipping cost is for vaperev?

edit.. I put a Gus 18350 in my cart just to see what they would charge me for shipping.. looks like only a couple dollars.

 

[kdragn]

$6.95 USPS Priority Mail at VapeRev.

Registered mail from FinnVape was only $8, but took ten days to arrive.

If you have the patience, one week of waiting is probably worth the cash.

Personally, I have very little patience these days. I've had great experiences with VapeRev on multiple transactions and wouldn't hesitate to buy from them again.

 

[Larzis]

I would go with FinnVape or direct from modder site. Then again I don't care for VapeRev.... Though I know a few people who claim they have been awesome for them.

 

[donnah]

$6.95 USPS Priority Mail at VapeRev.

Registered mail from FinnVape was only $8, but took ten days to arrive.

If you have the patience, one week of waiting is probably worth the cash.

Personally, I have very little patience these days. I've had great experiences with VapeRev on multiple transactions and wouldn't hesitate to buy from them again.

I don't mind waiting as long as I know they'll have them again and I can get one. Waiting and shopping is half the fun LOL. I never knew when I started vaping and quit smoking I'd develop a shopping addiction!

They look to be much more expensive if I buy directly from the atmomixani site.

I know I will check the atmizoo site in the morning when I get up.. I hope they're out of stock and I won't have to make a decision!

 

[b0redagain]

Still some in stock.

 

[donnah]

Ss matte rollers still in stock

 

[donnah]

bumpin back up. As of right now.. custom Dingos and matte Rollers are still in stock. And yes, I did order the matte Roller