atomizer seat

[jrlakeman]

Anyone got a good solution for atomizer seats to store them on. Im gonna take a look at my local home depot see if i can come up with something.

This what they look like if you were to get from vape store.(yes there cheap but so am i )
Atomizer Seats - 101 Vape

Im open to your ideas i really dont care what it looks like long as it stands an atomizer up. I got mine proped up against stuff so anything better than that system of storage.

 

[Thrasher]

Those things are 5 bucks for a 7 pack at fasttech lol


Just use a big steel nut

 

[jrlakeman]

Those things are 5 bucks for a 7 pack at fasttech lol


Just use a big steel nut

Ill check it out thanks i forget about fasttech not a big fan but i think something simple as that i cant go wrong.

 

[puffon]

I just drill a hole in a water bottle cap.

 

[jrlakeman]

I got plenty of water bottle caps thats a fix i can do right now get those attys standing on there own. THX!

 

[K_Tech]

Those things are 5 bucks for a 7 pack at fasttech lol

That's what I use. They work, and even though they're not threaded, they are a stable enough platform for storage/display.
View media item 427997

 

[jrlakeman]

I love the display you have there. I would like to do that one day but i got a 4 year old that is much to curious at the moment uses his fingers to explore EVERYTHING.

 

[SissySpike]

a 2x4 with some 5/16 holes drilled in it is about as easy and cheap as you can get If you wanted to get fancy you could use some spade bit and make a nice seat for it.

 

[K_Tech]

I love the display you have there. I would like to do that one day but i got a 4 year old that is much to curious at the moment uses his fingers to explore EVERYTHING.

Fortunately (or unfortunately ) I live alone, so I just have to worry about the pets.

 

[leanns480]

I use my extra beauty rings to set them up on... if it is the cone shaped ones, I turn them upside down.. Works well.

 

[Haylon357]

I use the nuts off of bolts

Tapped from my LG G3

 

[jrlakeman]

All great idea's so far thx. I found my auger bits cleaning up my tool closet as i couldnt find a simple screwdriver to fix a door. I have a auger thats perfect size to make recessed seats in a piece of wood. The good thing is that it also gives me a center hole to drill out for the 510 conn to sit in. I gotta search out a nice piece of material for this maybe some oak if my local lumberyard has some cutoffs. Usually they super cheap or even give it away as its not much use to them in short lengths. Maybe ill sand it after depends what the wood looks like sometimes the rough cut stuff not to bad looking i think it gives it character.

 

[SissySpike]

All great idea's so far thx. I found my auger bits cleaning up my tool closet as i couldnt find a simple screwdriver to fix a door. I have a auger thats perfect size to make recessed seats in a piece of wood. The good thing is that it also gives me a center hole to drill out for the 510 conn to sit in. I gotta search out a nice piece of material for this maybe some oak if my local lumberyard has some cutoffs. Usually they super cheap or even give it away as its not much use to them in short lengths. Maybe ill sand it after depends what the wood looks like sometimes the rough cut stuff not to bad looking i think it gives it character.

There ya go some polly sealer and for less than 20$ you have a atty stand. You could even pick up some fancy wood knobs and put little feet on it with felt so as not to scratch your desk or table.

 

[jrlakeman]

Genius! My creativeness is lacking these days thanks for the great ideas!

 

[englishmick]

I got a piece of 1X6 oak from HD for a few bucks, cut it up, and glued 3 pieces together. The extra weight makes it stable. Drilled a bunch of different sized holes for batteries and tanks. I used forsner bits in the drill press, and finished it with shellac and wax so it looks classy. I made another one out of cherry from an old chest of drawers a neighbor put out for trash. Got some small sticky felt pads like you see on kitchen cabinet doors for feet. I would post pictures if I could figure out how to do that.

A piece of 2X4 would work fine if you don't need it to look fancy. Those stands you were looking at would be good if they were located somewhere they weren't going to be bumped and knocked over. Mine sit on the front of my computer desk so I need something solid.

Now I'm trying to figure out something similar to put my box mods in.

 

[englishmick]

Duplicate

 

[jrlakeman]

Ahh nice idea about salvaging wood from old furniture. I see tons of broken stuff out since ppl are spring cleaning. I would love to get ahold of some cedar as i love the smell while working with it.

 

[SissySpike]

I got a piece of 1X6 oak from HD for a few bucks, cut it up, and glued 3 pieces together. The extra weight makes it stable. Drilled a bunch of different sized holes for batteries and tanks. I used forsner bits in the drill press, and finished it with shellac and wax so it looks classy. I made another one out of cherry from an old chest of drawers a neighbor put out for trash. Got some small sticky felt pads like you see on kitchen cabinet doors for feet. I would post pictures if I could figure out how to do that.

A piece of 2X4 would work fine if you don't need it to look fancy. Those stands you were looking at would be good if they were located somewhere they weren't going to be bumped and knocked over. Mine sit on the front of my computer desk so I need something solid.

Now I'm trying to figure out something similar to put my box mods in.

The same kind of thing would work just use a chisel to finish the corners you could add some rail or molding around the perimeter to make it look fancy.

 

[alicewonderland]

hazematic sells some nice ones with a 510 connection on the base, and a top cover. The price is ridiculous tho just for 1 of em comes to 20$+ shipping just for one stand. the base is 304 stainless steel tho. Would be nice for those out there who baby their high end authentics. Serves as a protective display case and build deck for atties.

 

[jrlakeman]

My vulcan rda came in a capsule like that wish i could find more as it does make a great stand. I think $20 is a bit to much for me to spend considering i need alot of them.