Atomizer Tanks?

Status
Not open for further replies.

reverser

Full Member
Verified Member
Dec 6, 2011
42
24
東京
Hi all,

Relatively new to vaping, but have done my best to self-educate so hopefully at least the questions I pose make sense :D

My question is this:

I'm using a ProVari. I have a Liquinator, as well as a MadVapes carto tank on the way. I've used the Liquinator for about a week now. I like the fact that I don't have to refill every 5 vapes or so like a typical carto, but I don't like that fact that the taste seems to diminish significantly after only a day of use. I keep the carto nice and wet, and the tank full. Nonetheless, while it is still smokeable after a day, much of the taste of the juice is lost.

I am looking to a tank atomizer as a possible solution. Cost is not a huge issue though I'd like to be as economical as possible.

I see talk of the Bulli, Genesis, etc. Are these things available for purchase? I can't find a site selling them anywhere. Are there alternatives? Is this a solution for my taste issue?

I would prefer that the atty be rebuildable so I can do my own maintenance.

Any advice? What is my solution?

Thanks in advance for your help.
m
 
Last edited by a moderator:

Creniker

Ultra Member
ECF Veteran
Verified Member
Mar 24, 2011
1,518
462
Salt Lake
Default Atomizer Tanks?

Hi all,

Relatively new to vaping, but have done my best to self-educate so hopefully at least the questions I pose make sense

My question is this:

I'm using a ProVari. I have a Liquinator, as well as a MadVapes carto tank on the way. I've used the Liquinator for about a week now. I like the fact that I don't have to refill every 5 vapes or so like a typical carto, but I don't like that fact that the taste seems to diminish significantly after only a day of use. I keep the carto nice and wet, and the tank full. Nonetheless, while it is still smokeable after a day, much of the taste of the juice is lost.

I am looking to a tank atomizer as a possible solution. Cost is not a huge issue though I'd like to be as economical as possible.

I see talk of the Bulli, Genesis, etc. Are these things available for purchase? I can't find a site selling them anywhere. Are there alternatives? Is this a solution for my taste issue?

I would prefer that the atty be rebuildable so I can do my own maintenance.

Any advice? What is my solution?

Thanks in advance for your help.

m

For those who actually want to read what he said.
 

Killjoy1

Ω Destroyer
ECF Veteran
Verified Member
Aug 15, 2011
9,304
9,365
46
New Hampshire, US
You can use your existing tanks with atomizers if you want. 306 or 510 attys will require a little modding effort, but if your tanks are the smaller size you can put a 901 atomizer in them, those will feed through the existing air hole just like a punched carto. It can take a little practice to figure out how best to draw on it without flooding, but it does work :)
 

yvilla

Ultra Member
ECF Veteran
Verified Member
Nov 18, 2008
2,063
575
Rochester, NY
Reverser, with regard to your question about rebuildables, the genesis attys are usually sold via coops, and this might be something you want to look into. For example, the G-tank US coop almost ending right now: http://www.e-cigarette-forum.com/forum/modding-forum/234010-g-tank-us-co-op-support-thread.html

It's too late to get in on that one, but there may well be another, and you might want to keep an eye on the classifieds section, where it will likely be announced as this one was.

As for the Bulli, I have a few Bulli atomizers and absolutely love them. Between my Bullis and the coming G-tank US (and the genesis LV I also have coming from another coop in Europe), I'll never have to buy another atomizer or cartomizer again! The Bulli hasn't been available for a while because its maker in Germany had health issues and was swamped with orders, but it is to be hoped they will go on sale again soon. The English version of the Bulli site for you to keep an eye on is this: Welcome! - Bulli-Smoker GmbH

And another thing to consider is the availability of mods that are all in one - battery holder, tank, and rebuildable atomizer. One good example of that is the Zenesis PV, sold by a supplier registered here on ECF. The cool thing about it is that to build the atomizer you can use either fiber wick and wire, like a Bulli, or make it a genesis atty using SS wick and wire. His thread is here:
http://www.e-cigarette-forum.com/fo...45748-house-hybrids-featuring-zenesis-pv.html
 

dragonlover

Super Member
ECF Veteran
Verified Member
Apr 26, 2011
807
573
chicopee ma
You can use your existing tanks with atomizers if you want. 306 or 510 attys will require a little modding effort, but if your tanks are the smaller size you can put a 901 atomizer in them, those will feed through the existing air hole just like a punched carto. It can take a little practice to figure out how best to draw on it without flooding, but it does work :)

got any links to pics or how to's about this?
 
Status
Not open for further replies.

Users who are viewing this thread