Augvape Druga rta 3D Bottom Air Flow
The new Augvape Druga rta 24mm as the name suggests is the RTA version of the "Druga" range.
It is a very compact single coil regenerable atomizer, not very far from the measures of a classic rda.
The deck uses a four screw fixing system, depending on how we want to install the legs of our coil.
The internal 3D air flow makes use of "honeycomb" channels that hit the coil from the bottom and side to restore a better aromatic quality.
Enjoy the reading
The package bears the now famous Augvape "Druga" logo on the front, an adhesive stamp to indicate its color and a two-color "RTA" written in large letters.
On the back are shown; the content, the social addresses on which the brand is present and the scratch & check to verify its authenticity.
Kit includes:
1 x AUGVAPE Druga RTA 2.4ml
1 x "Bubble" Pyrex Glass
4 x screws
4 x O-rings
Specifications and Dimensions:
Dimensions: 24x39.5mm
Weight: 39gr
Top refil
Low Profile
Material: stainless steel
3D airflow adjustable
Deck: Rebuildable Single Coil
Capacity: Pyrex straight 2,4ml
Capacity: Pyrex Bubble 3.5ml
Deck: Single Coil
Thread: 510
Available colours:
Stainless Steel, Gunmetal, Matt Black.
First impressions:
The Druga RTA compared to its brother Intake MTL has strangely smaller dimensions in height, even the steel parts seem to be thinner, in fact there are 20 grams of difference in weight! It seems that Augvape thought of those looking for a DTL atomizer as big as a classic RDA or a little more, able to be installed on small mods with a good aesthetic impact.
The capacity limited to 2.4ml appears to be a contradiction for a high performance atomizer, fortunately the package includes a "Bubble" type glass which extends its capacity to 3.5ml, an acceptable value for this compact RTA Single Coil.
Description Druga RTA:
The 810 drip-tip in derlin has no oring and in the narrower internal part it measures 8mm in diameter, the holding oring is instead contained inside the top-cap.
The Top cap has an internal thread to be screwed / unscrewed to the central body, a large black gasket guarantees sealing when closed.
The central structure is equipped with two refueling slots large enough to be stocked even by dispensers with a very large spout.
The bell is externally branded with the classic "Druga" logo while internally it is provided with a thread to be screwed / unscrewed from the deck, the internal measures of the bell are; depth 11.5mm, width 16.5mm, the upper profile is truncated cone designed, the chimney has a diameter of 7mm.
The AFC ring is equipped with limit switch stops and can be removed, under it there is a sealing o'ring.
The two opposing slots measure 9x2mm, the air is channeled towards the deck passing through two rows of three holes each, this arrangement of "honeycomb" holes also called 3D has the task of investing the coil with a radius of 'rather large action, located in a raised position there are two further holes of larger dimensions than the previous ones, the latter have the task of striking the coil parallel and partly also in the highest area.
The buttonholes for positioning the cotton are of considerable size and can accommodate (adequately thinned) even the cotton that comes from a large 4mm diameter coil.
When handling the DRUGA RTA deck, you must be careful not to lose the O-ring on which the Pyrex glass rests (this happened to me) luckily there are several spare O'ring in the bag.
Thread 510 houses a gold-plated pin, peek-insulated and slightly protruding. Around the Thread are engraved the logo, the brand and the words "By Vapeshouse And Augvape".
The four-screw fixing system allows you to install the coil in any arrangement, regardless of whether they have parallel or opposite legs, top or bottom legs. The clamping area is quite large, therefore suitable for hosting flat or very thick ends. The cut is quite easy.
The new Augvape Druga rta 24mm as the name suggests is the RTA version of the "Druga" range.
It is a very compact single coil regenerable atomizer, not very far from the measures of a classic rda.
The deck uses a four screw fixing system, depending on how we want to install the legs of our coil.
The internal 3D air flow makes use of "honeycomb" channels that hit the coil from the bottom and side to restore a better aromatic quality.
Enjoy the reading
The package bears the now famous Augvape "Druga" logo on the front, an adhesive stamp to indicate its color and a two-color "RTA" written in large letters.
On the back are shown; the content, the social addresses on which the brand is present and the scratch & check to verify its authenticity.
Kit includes:
1 x AUGVAPE Druga RTA 2.4ml
1 x "Bubble" Pyrex Glass
4 x screws
4 x O-rings
Specifications and Dimensions:
Dimensions: 24x39.5mm
Weight: 39gr
Top refil
Low Profile
Material: stainless steel
3D airflow adjustable
Deck: Rebuildable Single Coil
Capacity: Pyrex straight 2,4ml
Capacity: Pyrex Bubble 3.5ml
Deck: Single Coil
Thread: 510
Available colours:
Stainless Steel, Gunmetal, Matt Black.
First impressions:
The Druga RTA compared to its brother Intake MTL has strangely smaller dimensions in height, even the steel parts seem to be thinner, in fact there are 20 grams of difference in weight! It seems that Augvape thought of those looking for a DTL atomizer as big as a classic RDA or a little more, able to be installed on small mods with a good aesthetic impact.
The capacity limited to 2.4ml appears to be a contradiction for a high performance atomizer, fortunately the package includes a "Bubble" type glass which extends its capacity to 3.5ml, an acceptable value for this compact RTA Single Coil.
Description Druga RTA:
The 810 drip-tip in derlin has no oring and in the narrower internal part it measures 8mm in diameter, the holding oring is instead contained inside the top-cap.
The Top cap has an internal thread to be screwed / unscrewed to the central body, a large black gasket guarantees sealing when closed.
The central structure is equipped with two refueling slots large enough to be stocked even by dispensers with a very large spout.
The bell is externally branded with the classic "Druga" logo while internally it is provided with a thread to be screwed / unscrewed from the deck, the internal measures of the bell are; depth 11.5mm, width 16.5mm, the upper profile is truncated cone designed, the chimney has a diameter of 7mm.
The AFC ring is equipped with limit switch stops and can be removed, under it there is a sealing o'ring.
The two opposing slots measure 9x2mm, the air is channeled towards the deck passing through two rows of three holes each, this arrangement of "honeycomb" holes also called 3D has the task of investing the coil with a radius of 'rather large action, located in a raised position there are two further holes of larger dimensions than the previous ones, the latter have the task of striking the coil parallel and partly also in the highest area.
The buttonholes for positioning the cotton are of considerable size and can accommodate (adequately thinned) even the cotton that comes from a large 4mm diameter coil.
When handling the DRUGA RTA deck, you must be careful not to lose the O-ring on which the Pyrex glass rests (this happened to me) luckily there are several spare O'ring in the bag.
Thread 510 houses a gold-plated pin, peek-insulated and slightly protruding. Around the Thread are engraved the logo, the brand and the words "By Vapeshouse And Augvape".
The four-screw fixing system allows you to install the coil in any arrangement, regardless of whether they have parallel or opposite legs, top or bottom legs. The clamping area is quite large, therefore suitable for hosting flat or very thick ends. The cut is quite easy.
