Authentic Plume Veil 1.5 - O Ring Size?

[viking68]

First off, the flavor, the vapor clouds - it's all amazing.

You've seen the review, yes, the price is outrageous for the quality delivered. Burrs, PEEK insulator "stuck" due to lousy threading in the top cap. Tight fit of barrel to deck (probably due to inconsistencies with the plating process - .006 plating is claimed.

Packaging is crap. Mutation X v2 authentic packaging is professional, for example. It retails for 1/3 to 1/4 the cost of a PV. BUT - a PV it ain't!

No spare o-rings? No teeny screwdriver? And, what's up with the tapping on the center post? I use 26 gauge and you got to "crank" to get it to hold.

That said, what is the freaking o-ring size? I've got a set of digital calipers, but I don't want to pull one for fear of breaking - then I don't have my PV to vape on!!!!

Somebody, somewhere has got to know this.

Thanks in advance.

 

[Sthur]

Welcome to the forums, buy and clne and use the parts you need.

The clone group might know. http://www.e-cigarette-forum.com/forum/rebuildable-atomizer-systems/586317-plume-veil-clone.html

Bump Incase anyone's else knows.

 

[2naphish]

if you are talking about the o-rings that hold base cap (with the side airflow control) i found i couldn't pull off the top cap as they were too loose. i had bought a set of o-rings and gold plated screws from e-bay for a Patriot and they looked about right so i swapped them out. PERFECT! now its easy to pop the top cap off to inspect my build and i don't fear the entire cap turning when i adjust the airflow on the sides..... hope this helps.

 

[viking68]

if you are talking about the o-rings that hold base cap (with the side airflow control) i found i couldn't pull off the top cap as they were too loose. i had bought a set of o-rings and gold plated screws from e-bay for a Patriot and they looked about right so i swapped them out. PERFECT! now its easy to pop the top cap off to inspect my build and i don't fear the entire cap turning when i adjust the airflow on the sides..... hope this helps.

Thanks! Aethertec's QC just sucks. I had to send back my PV because the delrin top cap would not move. Good dealer, sent me a new, tested one, but those internal threads are ragged.