AW IMR 18350 In Stock Now at Super-T!

[forcedfuel50]

Compare Prices shipped on batteries and chargers and you will see Super-T has some of the best prices available! Super-T carries a full line of the most popular AW batteries in both safe chemistry IMR high drain and Protected Li-ion models. Super T also carries a large selection of UltraFire and Pila chargers.

Shipping is only a $1.35 via first class mail on battery and charger orders up to 36.00! Orders over 36.00 are a flat rate $4.99 via Priority mail with tracking and insurance. All in stock batteries and chargers usually ship within 1 business day of placing your order.

To view our full inventory and order visit: Super T Manufacturing, Innovative manufacturer of electronic cigarette products.

Aw Protected Li-ion Available in 14500, 16340, 17500, 17670, 18350, 18500 and 18650 and AW IMR high drain batteries available in 14500, 16340, 18350, 18490, 18650, 26500:

***************************************************************
[FONT=comic sans ms,sand]Pila IBC 4 Stage Intelligent Charger for Li-ion Batteries: 14500, 17500, 17670, 18490, 18500, 18650. $45.99[/FONT]

To order visit: Super T Manufacturing, Innovative manufacturer of electronic cigarette products.

Optional 12 Volt Car Adapter for using your Pila Charger in your Car:

4 stages:
Stage 1 – Automatic analyzing battery status
Stage 2 – Quick charge
Stage 3 – Slow charge
Stage 4 – Standby mode, trickle charge

Warranty: Pila Co., LTD warranties the Pila IBC charger for one year when used with Pila batteries only

Specifications:
AC/DC adaptor power in : 100 to 240 VAC (50/60 Hz)
AC/DC adaptor power out : 6 VDC / 2.5 A
DC/DC adaptor power in : 12 to 24VDC
DC/DC adaptor power out : 6 VDC / 3 A
IBC Charger DC in : 6 VDC / 2-3 A
IBC Charger DC out : 4.2 VDC / 600mA x 2
Ambient temperatures : 0oC to 40oC (32oF to 104oF) for operation
-20oC to 60oC (-4oF to 140oF) for storage
Dimensions : Approx 95mm (L) x 55mm (W) x 48 mm (H)
Weight : Approx.130g (excluding adaptor and power cord).


Trustfire TR-001 $11.99 fits most 3.6/3.7 volt rechargeable IMR and Li-ion batteries including 10440, 14500, 16340, CR123, 17650, 17670, 18500, 18650 etc: Max Charger Rate 500mA

UltraFire WF-188 $19.99 Selectable to charge 3.0/3.2 volt batteries or 3.6/3.7 volt batteries. Fits most popular battery sizes including 14500, 16340, CR123, 17650, 17670, 18350, 18500, 18650, 26500, 26650 etc Max 650mA charge rate:

Ultrafire WF-139 $14.99 fits most 3.6/3.7 volt rechargeable batteries including 14500, 16340, CR123, 17650, 17670, 18350, 18500, 18650, 26500, 26650 and most sizes in between. Requires 15mm spacer for 16340, 123 and 18350 batteries. Max Charge Rate 450mA:

UltraFire WF138A $11.99 Switchable Charger for most 16340/123 3.0/3.2 and 3.6/3.7 Volt Rechargeable Batteries. Max Charge Rate 250mAh:

UltraFire WF-138B $11.99 Charger for most 10440 and 14500 3.6/3.7 Volt rechargeable batteries. Max Charge Rate of 250mAh:

*******************************************************

Please use extra caution when charging and using any rechargeable battery. Batteries can fail without warning. Do not overcharge or over-discharge batteries as battery failure may occur. Never leave charging batteries unattended. Please vist the Battery University for more information on all things battery releated: Battery information from Battery University

 

[Vaporologist]

That's a nice lineup!

Do you know if AW has any plans of making the LifePO4 battery in a 18340 or 18350 size? It would be nice to fill that extra space in 18650 mods for 6V vaping with extra Mah rather than with duck tape or business cards...

 

[cappadoc]

I love that idea VP. I've been wondering the same thing. Just did a google search with no usable result.

 

[Vaporologist]

I love that idea VP. I've been wondering the same thing. Just did a google search with no usable result.

I've looked too and I don't think they are currently in existence. I suspect the demand would be high enough to justify production, at least I hope...

 

[forcedfuel50]

That's a nice lineup!

Do you know if AW has any plans of making the LifePO4 battery in a 18340 or 18350 size? It would be nice to fill that extra space in 18650 mods for 6V vaping with extra Mah rather than with duck tape or business cards...

Unfortunately, i just recently asked, and AW does not plan to make one

 

[Vaporologist]

Unfortunately, i just recently asked, and AW does not plan to make one

Well, let's give them six months, they'll catch on after someone else does it

Thanks for looking into this...

 

[forcedfuel50]

I told them i thought there would be a significant market, but they weren't interested at this time, but that may change in the future, so i'll bend their ear again in the not so distant future

 

[jmanning]

Don't see the AW IMR 18350 on your site, will it be added soon?

 

[jmanning]

Ok, I see them now. Just ordered a couple. Thanks

 

[VaporMadness]

Don't see the AW IMR 18350 on your site, will it be added soon?

Can the 18350 be charged on the UltraFire WF138A charger? Do they fit?

 

[forcedfuel50]

Can the 18350 be charged on the UltraFire WF138A charger? Do they fit?

Funny you should mention that i have two 18350's in the WF138A as we speak! They fit great! I'll let you know when they are finished charging and voltage test them!

David

 

[forcedfuel50]

Can the 18350 be charged on the UltraFire WF138A charger? Do they fit?

They sure can be, i took them off the WF138A charger and they are reading fully charged at 4.2 volts.

 

[VaporMadness]

They sure can be, i took them off the WF138A charger and they are reading fully charged at 4.2 volts.

Awesome... thanx for checking Two of those things in a fullsize P18 would be a crankin extreme HV setup.

Any thoughts of making a shorty P18 tube that uses the same endcaps as the fullsize guy but is only as tall as the P16? That would be a step up in capacity from what the P16 or even a P14 (if such a thing existed) provides. A P18 long/short rig might be a winner. I know if i could get an longer tube for my P16 that would allow to take 18650 batts... i would have done that by now

 

[atavanhalen]

This is really funny, was it you that is on the bandwagon of wanting the p16 tube that would hold two 16340s or 2 lifepo4s? This is the opposite of that but I would love to see both!!!
edit; I think it might have been vaporologist that was on that bandwagon but you are welcome on it as well. lol

Awesome... thanx for checking Two of those things in a fullsize P18 would be a crankin extreme HV setup.

Any thoughts of making a shorty P18 tube that uses the same endcaps as the fullsize guy but is only as tall as the P16? That would be a step up in capacity from what the P16 or even a P14 (if such a thing existed) provides. A P18 long/short rig might be a winner. I know if i could get an longer tube for my P16 that would allow to take 18650 batts... i would have done that by now

 

[Vaporologist]

This is really funny, was it you that is on the bandwagon of wanting the p16 tube that would hold two 16340s or 2 lifepo4s? This is the opposite of that but I would love to see both!!!
edit; I think it might have been vaporologist that was on that bandwagon but you are welcome on it as well. lol

Oh, I'm still on the bandwagon, for sure! I just figured to not bug David about it until after the release of the Shockwave... I really want it, badly!!!

 

[VaporMadness]

This is really funny, was it you that is on the bandwagon of wanting the p16 tube that would hold two 16340s or 2 lifepo4s? This is the opposite of that but I would love to see both!!!
edit; I think it might have been vaporologist that was on that bandwagon but you are welcome on it as well. lol

Yup... that's vaporlogist, he likes the 6v setup... 3.7v and LR attys work for me, so i'd be more interested in greater 3.7v capacity out of a still small mod, but the option to go 18650 big would be nice.

 

[atavanhalen]

Oh, I'm still on the bandwagon, for sure! I just figured to not bug David about it until after the release of the Shockwave... I really want it, badly!!!

I know what ya mean, I actually have been tempted to have my machinist buddy make the longer tube for me but I am worried it will not look as good as the caps because I do not think he has the same skill set as David.

Yup... that's vaporlogist, he likes the 6v setup... 3.7v and LR attys work for me, so i'd be more interested in greater 3.7v capacity out of a still small mod, but the option to go 18650 big would be nice.

I have a place in my heart(or throat) for both, there are just sometimes that only hv will do if ya know what I mean!

 

[forcedfuel50]

yes, i have given thought to all the above and will most likely go ahead with most of them, however, i'm still trying to catch up on some previously promised products before those take shape. Good news is, i have some extra help here now

 

[Vaporologist]

yes, i have given thought to all the above and will most likely go ahead with most of them, however, i'm still trying to catch up on some previously promised products before those take shape. Good news is, i have some extra help here now

Sweet! Can't wait.

 

[atavanhalen]

yes, i have given thought to all the above and will most likely go ahead with most of them, however, i'm still trying to catch up on some previously promised products before those take shape. Good news is, i have some extra help here now

Aw yeah, that really gets me excited. Hopefully your help is almost as skilled as you so it will cut every wait time in half. Will your new help be joining us here on the forum?