batteries

Status
Not open for further replies.

Baditude

ECF Guru
ECF Veteran
Apr 8, 2012
30,394
73,076
71
Ridgeway, Ohio
Because of those Panny's 10 amp continuous discharge limit, I DO NOT recommend using them with coils < than 0.8 ohm.

Coil resistance can inexplicably change due to several factors and should the ohms fall to 0.5 ohm then you are at the limit of those batteries and placing them and yourself in danger. Always leave yourself a little safe wiggle room when using batteries for this application. Routinely check you coil's resistance with your multimeter to insure that it has not changed.

If you are hell-bent on using sub ohms @ 0.2 - 0.7 ohm, I recommend getting some of the following IMR or IMR/Hybrids that have a continuous discharge rating of 20 or more amps.

Ohm's Law Calculator

AW IMR
18650 2000mah 10Amp CDR
18650 1600mah 24A

MNKE IMR
18650 1500mah ​20A

Panasonic ​or Orbtronic hybrid
CGR18650CH (IMR/hybrid) 2250mAh 10A
NCR18650PD (LiNiCoAl) 2900mAh 10A

Orbtronic 18650 SX22 (hybrid) 2000mAh 22A

Samsung hybrid (LiNiCoMnP)
INR18650-22P 2200mAh 10A
INR18650-20R 2000mah 22A

Sony
us18650v3 IMR 2250mAh 10A
us18650vct3 (hybrid) 1600mAh 30A

Efest IMR
18650 (IMR/hybrid) 2250mAh 10A
18650 2000mAh 10A

18650 1600mAh 30A
Battery Basics for Mods: IMR or Protected?
 
Last edited:
Status
Not open for further replies.

Users who are viewing this thread