Actual Z atty Size - 22.23 mm x 25.4 mm
So....any 22mm tank would work.
Last edited:
Bedazzle Glass Tubes
- Thread starter MeltingGlass
- Start date
- th_trl_thread_readers 0
-
- Tags
- glass tanks lavatube provari
- Status
Actual Z atty Size - 22.23 mm x 25.4 mm
So....any 22mm tank would work.
Are you looking for a complete tank or a tube for a certain item?
A complete tank (with end caps) to put my Diver and Killer in.
If you go to her web site (bedazzletubes.com) & put your mouse on the tab that says "Aluminus" a drop down menue will appear and at the bottom it will say "Dual coil, X-large, Killer"...that is where you can pick out a tube that will fit the Killer & the tubes listed under the "Aluminus" tab will fit your Diver.
Then put your mouse on the tab that says "Mods 4 sale" & a drop down will appear that says "Caps". The caps shown will all fit the tubes you pick out.
Hope that helps you & sorry I can't post direct links to everythimg for you, but I'm on my phone.
Then put your mouse on the tab that says "Mods 4 sale" & a drop down will appear that says "Caps". The caps shown will all fit the tubes you pick out.
Hope that helps you & sorry I can't post direct links to everythimg for you, but I'm on my phone.
If you go to her web site (bedazzletubes.com) & put your mouse on the tab that says "Aluminus" a drop down menue will appear and at the bottom it will say "Dual coil, X-large, Killer"...that is where you can pick out a tube that will fit the Killer & the tubes listed under the "Aluminus" tab will fit your Diver.
Then put your mouse on the tab that says "Mods 4 sale" & a drop down will appear that says "Caps". The caps shown will all fit the tubes you pick out.
Hope that helps you & sorry I can't post direct links to everythimg for you, but I'm on my phone.
I've been to that page (link below), but how do i know which ones are 20mm in OD? All show the 'length' but none speaks of the 'diameter'
Dual Coil, X-Large, Killer - Bedazzle Tubes
I've been to that page (link below), but how do i know which ones are 20mm in OD? All show the 'length' but none speaks of the 'diameter'
Dual Coil, X-Large, Killer - Bedazzle Tubes
See where it says 20*...that is the OD.
There are some that say 22* also and those ones have a thicker wall (2.5 or 3mm).
See where it says 20*...that is the OD.
Oh wow! Thanks. Now am bugged with the 'caps': Caps - Bedazzle Tubes
They are all colorful, aren't there any plain metallic ones without the 'dome' on top?
I don't know if she has any of her silver ones left, that are just regular caps.....I know she'll check in on her thread here in a bit, so hopefully she can give you a better answer than I can.
Actual Z atty Size - 22.23 mm x 25.4 mm
So....any 22mm tank would work.
Thanks, so I should have clarified my request. Which tubes am I looking for in the tabs to fit the zatty? (i.e. zen, zen2, etc)?
Cat, you want the Zen mini/Zen2 mini (same thing) if you want it to fit the Zatty (ZAP, ZAU, ZAG).
Hi
What I have left for caps are posted. Sorry I'm sold out of ss or plain aluminum.
But I just listed some new tanks complete with punched carto. Aluminus Tanks - Bedazzle Tubes
What I have left for caps are posted. Sorry I'm sold out of ss or plain aluminum.
But I just listed some new tanks complete with punched carto. Aluminus Tanks - Bedazzle Tubes
Sorry if the pics are big (can't really tell from my tablet). It is impossible to show the true craftsmanship of this Bedazzle, but it truely is awesome!! This is on my GP SS Paps & SNP (salt & pepper) tank & I think it's a perfect match......thank you so much Kathy, I love it!!!! 
Oh, had to add my tank has a Killer 705 in it, not a regular carto.
Oh, had to add my tank has a Killer 705 in it, not a regular carto.
Last edited:
Thank you Kathy so much for the beautiful Dazzits. They will get put to use.
Secondly, haven't tried yet but how hard is it to drill a small hole in these?
And lastly, just an idea: for the ones of us that use gennies, I'm consistantly looking at my mod to make sure that the air hole is on the bottom, if there was an airhole is the center of these dazzits and they were "welded" over the hole, just a quick feel would help align the device to where we need it to be. Only an idea, I think it would sell. Know I would get a few. Thanks again and have a great weekend.
Secondly, haven't tried yet but how hard is it to drill a small hole in these?
And lastly, just an idea: for the ones of us that use gennies, I'm consistantly looking at my mod to make sure that the air hole is on the bottom, if there was an airhole is the center of these dazzits and they were "welded" over the hole, just a quick feel would help align the device to where we need it to be. Only an idea, I think it would sell. Know I would get a few. Thanks again and have a great weekend.
- Status
Similar threads
- Locked
- Locked
