Bedazzle Glass Tubes

[MeltingGlass]

Hi
I hate inconsistency as much as you guys do. That's why I wanted to go to either thin (quartz) or thick (pryex) glass. Every tube/tank I make is suppose to be 16mm id. Reguardless of the wall size or height.
Besides dealing with different size end caps (including JB caps) I find inconsistency in tubing. Right now I have one supplier for quartz and hard glass. I'm working on end caps for my regular tanks so everyone will have caps.
Right now facetting on thick wall hard glass tubes. I plan on offering some of these tubes for sale tonight. Their are 16mm id. I test each one with my newest JB end caps.

No, those won't...but the Little mama ones from Big Daddys Vapor should work on the Lava size.

The Lava size Bedazzles have a smaller ID then the regular sized Bedazzles....I have each, so I am positive of that.

Sent from my VM670 using Tapatalk 2

 

[tyleris12]

Hi
I hate inconsistency as much as you guys do. That's why I wanted to go to either thin (quartz) or thick (pryex) glass. Every tube/tank I make is suppose to be 16mm id. Reguardless of the wall size or height.
Besides dealing with different size end caps (including JB caps) I find inconsistency in tubing. Right now I have one supplier for quartz and hard glass. I'm working on end caps for my regular tanks so everyone will have caps.
Right now facetting on thick wall hard glass tubes. I plan on offering some of these tubes for sale tonight. Their are 16mm id. I test each one with my newest JB end caps.

Kathy, we know you are doing your best to bring us the best product possible, and tube size inconsistancy is common, so we know that isn't your fault at all!!!! I am sure people will love it when you have caps available too and will be patient until you are able to get that all set up. Heck, you just started all this and things take time to fall into place...so please know you at least have my full support and I am sure others here feel the same!

Can't wait to see the facetted tubes tonight....I bet they are just stunning!!

 

[catcat]

Kathy, Ditto on what Ty just said. You are amazing!!!

Kathy, we know you are doing your best to bring us the best product possible, and tube size inconsistancy is common, so we know that isn't your fault at all!!!! I am sure people will love it when you have caps available too and will be patient until you are able to get that all set up. Heck, you just started all this and things take time to fall into place...so please know you at least have my full support and I am sure others here feel the same!

Can't wait to see the facetted tubes tonight....I bet they are just stunning!!

 

[MeltingGlass]

I luv you guys!

 

[Sugar_and_Spice]

Hi
I hate inconsistency as much as you guys do. That's why I wanted to go to either thin (quartz) or thick (pryex) glass. Every tube/tank I make is suppose to be 16mm id. Reguardless of the wall size or height.
Besides dealing with different size end caps (including JB caps) I find inconsistency in tubing. Right now I have one supplier for quartz and hard glass. I'm working on end caps for my regular tanks so everyone will have caps.
Right now facetting on thick wall hard glass tubes. I plan on offering some of these tubes for sale tonight. Their are 16mm id. I test each one with my newest JB end caps.

Hi Kathy,

What time tonight? And i just got my 2 new bedazzles in the mail today........pics later...... I may have to start getting the reg sized bedazzles, or I need some more lava tops and bottoms. lol well, maybe I can get a couple more lava sized bedazzles .....

 

[yiddleboge6]

What time tonight, please?

 

[MeltingGlass]

Within the next 2 hours. Have to finish polishing them so you don't see scratches on them but still frosty looking

 

[delabs]

Hi Delabs...good to see you posting....and yes lil' mamas do work on lava tanks......yay!!

Hi Sugar-it ain't easy with my left hand. That's why they are far and few between.
Also I know the black derlin little mamas work on the regular size tube not lava also. Kathy I used them in my hummingbird tank so please correct me if I am wrong on the tank size

 

[MeltingGlass]

ALL SOLD OUT





These were very hard to photograph plus I didn't have time to practice. Pictures don't come close what they really look like. I did't polish any to mirror finish. The amount of time would be outrageous. PS don't worry about the tissue dust on them...
ALL SOLD OUT

 

[catcat]

I just got my bedazzles....oh my goodness! jewels in the back.....love love love them Kathy!!

 

[catcat]

Whoops!! My post came up the same time Kathy's did!!!
Kathy!!!! They are all beautiful....every single one of them!!

 

[tyleris12]

OMG....I love them Kathy!!!!

These were very hard to photograph plus I didn't have time to practice. Pictures don't come close what they really look like. I did't polish any to mirror finish. The amount of time would be outrageous. PS don't worry about the tissue dust on them...

 

[LilyBear]

well it figures now i cannot decide!

 

[Grammie]

I'm here friends! How to do I purchase, send a pm someone, please!?!

 

[LilyBear]

Hiya Grammie PM on the way to ya

 

[Grammie]

Thanks!! I want one or two for sure! I don't have any glass tubes, do these fit the lava tanks?

 

[LilyBear]

Yes i have several of the ones for lavas and they are awesome!

Thanks!! I want one or two for sure! I don't have any glass tubes, do these fit the lava tanks?

 

[Iowa Gal]

Thanks!! I want one or two for sure! I don't have any glass tubes, do these fit the lava tanks?

Tag your it...I caught you over here..yes they fit the Lava Tanks...

 

[LilyBear]

bringing this forward for grammie from the last ones that are not sold so she can see them

Here is my latest batch of Bedazzle's.

"

"

[/URL][URL="

 

[Grammie]

BRB (I need to go grab my dinner before someone else eats it), already sent Kathy a PM with my choices!!

Thanks for bringing them forward Lily! I found them real quick from your pm!