Been looking for low cost PV mod and Genesis tank system

[Olinb]

I am unfortunately unemployed these days so I really need to keep my costs down. Therefore I have been doing a lot of research on the Genesis tank system in order to find the lowest cost, and I found I also need a new PV since my Ego twists are not recommended for use with a Genesis. I "think" I have found the absolute lowest price point on both items. In fact, I'm having a hard time believing this is for real at this price. Can some of you experienced vapers take a look at these two items and give me your opinions? I would much appreciate any advice.

The PV is at:
cheapest vamo mod vv vw starter kit

The DID atty is at:
DID REPAIRABLE GENESIS STYLE ATOMIZER

Thanks...

 

[KerryK]

I would not go with stacking 18350 batteries and would only go with an 18650, since they fixed the spring issue all 18650's will work. That having been said I have read that you don't get full volts with the 18650 4.32v and need to stack 18350's to get to 4.8v but you should understand the risks with stacking.

I would check the center pin when you get it and if it's off center send it back immediately, also I have heard complaints with center pins and leaking.

Remember it has no outside threading for ego so you will need to use an adapter (unless they fix'd that in the V2 model, I can't tell from the picture)

 

[FNG619]

Thats probably the best cost effective combo right now. That DID clone looks legit.. I'm new to rebuilable myself but I actually loving my phoenix bully ( drip RBA with ss mesh) kinda wish I go that clone first. CAREFUL with that site I read bad reviews/experiences about them on this site but I myself was thinking about goin with them just for that price. The did clone you can get on a couple sites.. My favorite juice site thats super cheap sells those ECBLEND.com use the coupon code 10020. Best cheap juice I've found so far. MADVAPES has a version of the vamo also. I've been looking into that PV also, I'd recommend finding a stainless steel version better quality less fingerprints and the black chromes rubs off apparently fairly quick

 

[Olinb]

Thaks KerryK. You seem to be quite knowledgeable in this area which I am not. Do you know of a better alternative VV mod in this price range? And, what do you think about the DID Atty shown? Is it for real, at that price?

Thanks!

 

[NancyR]

Ok I have a did clone, which is what that is, and ok with some fiddling it isn't a bad vape, but it isn't as good as other genesis I have used. One of the best ones out on the market without breaking the bank is the AGA-T. Yes you will pay more for it, but the difference in ease of use, the vape and the materials it is made out of is more than worth it.

The did clones are plated brass or copper, the AGA is ss. I was already experienced with using a genny when I got the did clone, what normally takes me 15 minutes to set up took me over an hour.

Watch the co-op's also the AGA's range between $10-$15 depending on T or S making them not much more than you are looking at with that. VV or VW mods are in them all the time. It takes longer, that way, but will allow you to get a great set up cheaper than you will other wise.

 

[Olinb]

Thanks FNG... - just realized they are China vendor. No wonder the prices are so good. I may try the DID Atty and try and find a USA supplied PV. I've been looking for days for a VV mod and saw some at madvapes. I just ordered some juice at ecblend. I'll take a look there too. Actually the reason I am looking for a mod is because I want to try the Genesis tanks. I am using a carto tank system now but I have to switch cartos too often to maintain the flavor I want. I am hoping the SS wick will offer a more consistent flavor.

 

[NancyR]

Thanks FNG... - just realized they are China vendor. No wonder the prices are so good. I may try the DID Atty and try and find a USA supplied PV. I've been looking for days for a VV mod and saw some at madvapes. I just ordered some juice at ecblend. I'll take a look there too. Actually the reason I am looking for a mod is because I want to try the Genesis tanks. I am using a carto tank system now but I have to switch cartos too often to maintain the flavor I want. I am hoping the SS wick will offer a more consistent flavor.

You might want to check out mechanical then too if that is why you want it, I know people debate over which is better with a RBA, but what I know is that so long as my battery is above 3.5 I am vaping over 10 watts and loving it. Yes I meter everything but you should anyways. Also I never get the error messages, just have to use some common sense.

 

[Olinb]

Thanks Nancy - just got access to the co-op area today. Still not sure how it works but I'll figure it out. I don't mind waiting as I have about 35 new boge cartos so I can last a little while. Just so so much to choose from when looking at mod's. I also saw the aga-T but at 65.00 I am trying to find a cheaper one somewhere. Sigh, I need to get back to work soon.

 

[NancyR]

Thanks Nancy - just got access to the co-op area today. Still not sure how it works but I'll figure it out. I don't mind waiting as I have about 35 new boge cartos so I can last a little while. Just so so much to choose from when looking at mod's. I also saw the aga-T but at 65.00 I am trying to find a cheaper one somewhere. Sigh, I need to get back to work soon.

Watch the co-ops I have an AGA-T and one on the way, they where less than $15 each through co-ops, and I know there will be others with the AGA's in them.

 

[KerryK]

Check PB's review:

A PBusardo Review - The Vamo - YouTube

Ah, no center pin! Love PB!

 

[KerryK]

What I read is use IMR High Drain 18650's and set it to RM mode.

Don't know about the addy...

 

[elmattias]

Thanks Nancy - just got access to the co-op area today. Still not sure how it works but I'll figure it out. I don't mind waiting as I have about 35 new boge cartos so I can last a little while. Just so so much to choose from when looking at mod's. I also saw the aga-T but at 65.00 I am trying to find a cheaper one somewhere. Sigh, I need to get back to work soon.

65 bucks is a little crazy, discountvapers has the entire AGA line (there are three different versions, the =s , =h, and -t) and they are all less than 30 bucks....

Rebuildable Atomizers

just remember to get some mesh and wire, if you're new to recoiling things i'd probably start with a 32 gauge wire simply because it's more flexible and easier to work with...when you're comfortable grab some 28 gauge wire and then the fun REALLY starts.....

oh and don't forget a torch...you'll need a torch that produces a blue flame...butane i find works well, and you can get one at harbor freight for $10~20