Berserker v1.5 - how to improve airflow

[stuff.hunter]

Hi guys,
Just got one of this bad boys and wondering, is there any way to improve airflow as even on max settings (last airhole) seem to be too tight.

Cheers,
Kris

 

[zoiDman]

Have you tried using a Drip Tip with a Bigger Inner Bore?

 

[stuff.hunter]

Have you tried using a Drip Tip with a Bigger Inner Bore?

yes I did use the second plastic one which was in the box but not much difference to be honest.
Also, weirdly there was no o-rings on the dip itself...

 

[zoiDman]

yes I did use the second plastic one which was in the box but not much difference to be honest.
Also, weirdly there was no o-rings on the dip itself...

Sounds like someone Forgot to put the O-rings on that Drip Tip?

LOL

Just curious... How Big in the Inner Diameter of that Drip Tip?

I poked around in my Drip Tip Box, and my most free flowing Drip Tips have about a 6mm Inner Diam.

 

[Jebbn]

On the original I drilled out every point of airflow to max allowable and its still to tight for me.
I would think it might be similar with the v1.5

 

[stuff.hunter]

Sounds like someone Forgot to put the O-rings on that Drip Tip?

LOL

Just curious... How Big in the Inner Diameter of that Drip Tip?

I poked around in my Drip Tip Box, and my most free flowing Drip Tips have about a 6mm Inner Diam.

its more-less 4mm mate

 

[stuff.hunter]

On the original I drilled out every point of airflow to max allowable and its still to tight for me.
I would think it might be similar with the v1.5

quite afraid to mess it up to be honest, wouldn't drilling cause leaks?

 

[m1ke]

Take the airflow ring off. You'll be getting air through all the holes simultaneously then.

 

[Jebbn]

Take the airflow ring off. You'll be getting air through all the holes simultaneously then.

Winner. I forgot you could do that on the V1.5.

 

[stuff.hunter]

Take the airflow ring off. You'll be getting air through all the holes simultaneously then.

thanks mate but it would be too much air ..and it will looks ....e

 

[zoiDman]

its more-less 4mm mate

Might see if you can get one with a Bigger Inner Diam.

Sometimes they are called "510 Wide Bore" Drip Tips.

 

[stuff.hunter]

Might see if you can get one with a Bigger Inner Diam.

Sometimes they are called "510 Wide Bore" Drip Tips.

thanks mate, will try to get one

 

[m1ke]

thanks mate but it would be too much air ..and it will looks ....e

I agree with both, heh. I've tried it.

 

[Gcnc76]

You just need a different atty. This one obviously isn't for you. I use the 2nd or 3rd hole. The 4th and 5th are a bit too open for me. If I wanted more air, I'd get a different atty made for that. The Hellvape MD probably had exactly what you're looking for. I'm selling mine because I won't use it really, for pretty much that reason.