Best clone Mechanical Mod

[rizq Locus]

Hello vapers,,
I just joining in here, I interest with mechanical devices. Please give me recommendation related with best clone mechanical mod.
best conductor, and best magnetic switch.
Thanks.

 

[seth2769]

hcigar Nemesis ..i think & some more ...

 

[krobeson]

I have a Acerig Akuma coming that should be here this week sometime. I've only heard good things about it. I do plan on using a kick 2 in it....just to be on the safe side.

 

[Susan~S]

Have you read up on battery safety, ohms law and amp limitations?

 

[rizq Locus]

Have you read up on battery safety, ohms law and amp limitations?

Yes, I using Panasonic 18650 battery 3100mAh.
And I need no drop volt on my device.

 

[Susan~S]

Yes, I using Panasonic 18650 battery 3100mAh.
And I need no drop volt on my device.

IF your battery is the Panasonic 18650 3100mah Li-Ion battery -- IT IS NOT SAFE TO USE IN A MOD

Battery Basics for Mods: IMR or Protected ICR?
- choose the safest and right battery for your applications here. Includes a list of name brand, high-drain, safe-chemistry batteries with mAh & amp ratings in 18350, 18490/18500, and 18650 sizes.

 

[Cullin Kin]

Have you read up on battery safety, ohms law and amp limitations?

Yes, I using Panasonic 18650 battery 3100mAh.
And I need no drop volt on my device.

Just because it has a high mah rating does not mean it is safe for use in a mechanical mod. As Susan stated, please read up on battery safety, the best batteries to buy, and how ohms law pertains to mechanicals.

After you are thoroughly, and I mean thoroughly, versed in these topics, then find a mechanical to suit your needs.

I have one in mind but I'm not sure I should give that information out quite yet. I will, but please promise to do the above okay?

Manhattan Mod Clone

 

[Susan~S]

This was from a post by Baditude (our resident battery/safety expert) on another thread

Definition of a hard short

Battery Basics for Mods: IMR or Protected ICR?
- choose the safest and right battery for your applications here. Includes a list of name brand, high-drain, safe-chemistry batteries with mAh & amp ratings in 18350, 18490/18500, and 18650 sizes.

Rechargeable Batteries
- blog post on the preferred chemistry of batteries for mods by our forum administrator and resident battery expert Rolygate.

Deeper Understanding of Mod Batteries pt 1
- what do the letters & numbers on batteries mean? What's the difference between ICR, IMR, and hybrid batteries?

Deeper Understanding of Mod Batteries pt 2
- protected vs unprotected batteries, what is Ohm's Law, inline battery fuses, what is an AW battery, stacking batteries.

Technical: Why High Drain Batteries?
- technical explanation on why high drain batteries are required for a regulated VV/VW battery device.

Question for the Tech Engineers at Provape
- explanation of battery amp limits, internal resistance, and battery chemistry pertaining to regulated VV/VW mods.

Battery Specifications and Calculators
- self explanatory.


How to Use Your Multimeter

Video on How to Use Your Multimeter

Ohm's Law Calculator

Information Resources for Your First RBA

Mechanical Mod Proper Useage Guide

 

[Cullin Kin]

BADITUDE POST
This was from a post by Baditude (our resident battery/safety expert) on another thread

lol I know. However, you pointed him to those posts, which means you know it too.

 

[Susan~S]

lol I know. However, you pointed him to those posts, which means you know it too.

Sorry, I can see how my post could have been confusing. I just cleaned everything up! Thanks!

 

[Stetser]

Thanks for the relinks to all the battery information. I'm using an EFEST 1600 IMR16650 3.7V LI-MN high drain battery in my Chi-You clone, only because that's what a B+M store recommended me to use. I'll be going through all the linked information to help me get a better understanding though.

 

[Susan~S]

Thanks for the relinks to all the battery information. I'm using an EFEST 1600 IMR16650 3.7V LI-MN high drain battery in my Chi-You clone, only because that's what a B+M store recommended me to use. I'll be going through all the linked information to help me get a better understanding though.

Stetser -- you've got a good battery rated 30A continuous (it's on Baditudes list).

Here is an FYI regarding a couple of other purple Efest batteries.

If your batteries are the purple Efest 18650 2500mAh 35A batteries -- they are not 35A continuous. They are really rebranded LG18650HE2 2500mAh 20 amp continuous batteries.
Source: Baditudes Blog Battery Basics for Mods: IMR or Protected ICR?

Here is another warning that was posted on ECF regarding another purple Efest battery: Efest 3100mAh battery caution

 

[Typhoon9]

Hi i have a stingray x by infinite and it is fantastic would defo recommend it.

 

[DaveSignal]

I don't like the spring on the HCigar Nemesis. It isn't strong enough to prevent the device with atty from firing if it is put down and not locked. The HCigar Stingray and HCigar Turtleship are much better. The Stingray is magnetic and the Turtleship is a spring, but the spring has a smooth and short throw and is strong enough to hold the device + battery + atty without firing, even when unlocked.
I also have a Smoktek extender, which is an inexpensive authentic mod that works great. The magnets and locking mechanism are high quality.