Best Mods for Magma/Kayfun 3.1 ES Clone

[Yepix]

So I plan on getting this:
Kayfun v3.1 ES Rebuildable Atomizer Full Kit Clone For Sale From Angelcigs.com
A R91 would also be good if their is one at a reasonable price.
and
Magma RDA


So, I need a good mod, battery, charger, and drip tip, as well as an Ohms reader if the one on the mod isn't sufficient enough.
I have like 100$, I know its not much.



I know I keep changing my mind, its just that the more I learn about rda's the more interested I become in them.
No Mechanicals please, that's going to be too much for me.

I am also choosing Gwar Bloodbath, and Spearmint from MBV.

 

[Yepix]

Bump.

Anybody?

 

[anumber1]

A hana clone would fit your needs.

I have a cloupor clone and built a Fasttech clone Hana box with a authentic Evolv DNA30D board and a fat daddy spring loaded 510.

I use both with my Magma (built at .6 ohms) and my kayfuns (built at 1.5 ohms).

The clone box/real board unit cost $80 in parts and my time and effort to build (I enjoy tinkering).

The cloupor clone was about the same price and works pretty good but has all of the clone flaws. It wakes up on its own, takes 2 or 3 button clicks to wake up, adjusts its wattage setting down randomly and has a crooked 510 connector.

The box I built works flawlessly.

 

[Yepix]

A hana clone would fit your needs.

I have a cloupor clone and built a Fasttech clone Hana box with a authentic Evolv DNA30D board and a fat daddy spring loaded 510.

I use both with my Magma (built at .6 ohms) and my kayfuns (built at 1.5 ohms).

The clone box/real board unit cost $80 in parts and my time and effort to build (I enjoy tinkering).

The cloupor clone was about the same price and works pretty good but has all of the clone flaws. It wakes up on its own, takes 2 or 3 button clicks to wake up, adjusts its wattage setting down randomly and has a crooked 510 connector.

The box I built works flawlessly.

Have you ever tried an R91? It looks like a better version of the Kayfun.

 

[edyle]

So I plan on getting this:
Kayfun v3.1 ES Rebuildable Atomizer Full Kit Clone For Sale From Angelcigs.com
A R91 would also be good if their is one at a reasonable price.
and
Magma RDA


So, I need a good mod, battery, charger, and drip tip, as well as an Ohms reader if the one on the mod isn't sufficient enough.
I have like 100$, I know its not much.



I know I keep changing my mind, its just that the more I learn about RDA's the more interested I become in them.
No Mechanicals please, that's going to be too much for me.

I am also choosing Gwar Bloodbath, and Spearmint from MBV.

I've got confidence in Sigelei from what I've seen so far.
Yes the ohm reader in the mod is sufficient; better to buy a regular all round multimeter instead of an ohm reader.

But I gotta admit it's vamo I vape on most of the time.

 

[edyle]

So I plan on getting this:
Kayfun v3.1 ES Rebuildable Atomizer Full Kit Clone For Sale From Angelcigs.com
A R91 would also be good if their is one at a reasonable price.
and
Magma RDA


So, I need a good mod, battery, charger, and drip tip, as well as an Ohms reader if the one on the mod isn't sufficient enough.
I have like 100$, I know its not much.



I know I keep changing my mind, its just that the more I learn about RDA's the more interested I become in them.
No Mechanicals please, that's going to be too much for me.

I am also choosing Gwar Bloodbath, and Spearmint from MBV.

ceramic shorty tips
For drip tip I got some of these and am liking them - meaning they don't bother me:
http://fasttechcdn.com/products/156/1567903/1567903-3.jpg[img]
[url=http://www.fasttech.com/products/1411/10007016/1567903]$6.99 Ceramic Shorty 510 Drip Tips (5-Pack) 5-pack at FastTech - Worldwide Free Shipping[/url]

 

[Yepix]

I've got confidence in Sigelei from what I've seen so far.
Yes the ohm reader in the mod is sufficient; better to buy a regular all round multimeter instead of an ohm reader.

But I gotta admit it's vamo I vape on most of the time.

Is the Vamo V5 sufficient for the magma?

 

[edyle]

Is the Vamo V5 sufficient for the magma?

The v5 goes up to 15 watts; I've got a v5s control head;
I've only recently got some 28 gauge and have a igo-w3 with ..chking
2.4 ohm 28g igo w3

and my other one is

kayfun3.1 2.9 ohm 28g


: so the question: is the vamo v5 sufficient for the magma?
Yes: but sufficient is about the gauge of wire.
Thick wire needs more power.

I could run my coils higher power than I do now, but then things get ...... hot.
I prefer a cooler vape.

I wouldn't look at the vamo v5 though; I'd look at the vamo v6 isk; 3-6V; and 3-20 W.
$38.02 Authentic ISK VAMO V6 Variable Voltage / Wattage Mod - 1*18350/1*18650/2*18350 / 3.0-6.0V / 3-20W at FastTech - Worldwide Free Shipping

 

[Yepix]

I was considering 26 gauge wire.
I might just get the reader because its will be more accurate.

 

[anumber1]

Have you ever tried an R91? It looks like a better version of the Kayfun.

I have 2 FT kayfun 3.1s and 2 kfl+v2s.

I have not owned a russian 91% but once I figured out the kayfuns I have been very happy with them.

I also really like the Fogger. Its ugly but fantastic at the same time.

 

[Yepix]

Ah okay.

Too bad the MVP can't do subohm.

 

[MrPlink]

Get a IPV over any Hana clone (I have both, no bias here )

You can get either the 35w or 50w for under 100 dollars.
They are very accurate with ohms.
Wider range of usable power than the dna30 clones. Just a better chip set all around


They have a built in charger.
All you need is a battery after that

 

[siboriqua]

A hana clone would fit your needs.

I have a cloupor clone and built a Fasttech clone Hana box with a authentic Evolv DNA30D board and a fat daddy spring loaded 510.

I use both with my Magma (built at .6 ohms) and my kayfuns (built at 1.5 ohms).

The clone box/real board unit cost $80 in parts and my time and effort to build (I enjoy tinkering).

The cloupor clone was about the same price and works pretty good but has all of the clone flaws. It wakes up on its own, takes 2 or 3 button clicks to wake up, adjusts its wattage setting down randomly and has a crooked 510 connector.

The box I built works flawlessly.

I'm looking to upgrade my Hana clone with a real DNA 30 or 40 board and a fat daddy 510, is there such a place where i can send them for those upgrades?

 

[anumber1]

I'm looking to upgrade my Hana clone with a real DNA 30 or 40 board and a fat daddy 510, is there such a place where i can send them for those upgrades?

I don't know about that... I am a DIY kind of guy.