Best ratio juice for CE2 R5

[tjc516]

I'm usually using 100%VG like Boba's and Gorilla and i'm constantly getting the most painful hits all the time due to bad wicking. I've tried every tip fluffing, cutting the rubber piece so it doesnt press against the wick. I've stopped using them but they are a great idea and i would love to get them to work.

I've tried to read through the official thread but 588 pages is a but much.

Any help would be great. Thanks!

 

[Nomoreash]

The only other thing I'd recommend if flipping it over before each vape, just long enough to allow the liquid to flow around the cup. I use Bobas and Gorilla in them with no problems, I do have to flip it though if the tank isn't completely full but that's for any mixture.

 

[emus]

70%PG 30%VG wicks pretty good and produces nice clouds w/ CE2 R5.
80% H2O 20% VG works good also.
I have used 50% VG 50% PG in CE2 5 and it works good but wicks slower.

Some CE2s require tweeking to function properly.

 

[Optimo]

I use nothing but 100% VG in ce2s. All you have to do is throw away the plug on the ceramic cup and use the middle plug put that down on the cup lift up a tiny bit on each side where the wick is...when you start getting wicking problems turn your PV upside down and it re-wets the wicks.

 

[emus]

I use nothing but 100% VG in ce2s. All you have to do is throw away the plug on the ceramic cup and use the middle plug put that down on the cup lift up a tiny bit on each side where the wick is...when you start getting wicking problems turn your PV upside down and it re-wets the wicks.

Is that 100% VG mixed w/ thinner nic and flavoring?

 

[otrpu]

Pure VG w/nic clogged my coils. Now, I thin it back w/30 or 40% PGA. I find the larger the "Tank" diameter, the better the wicking. C-E2 based. JMHO

Cheers,
otrpu