You have a valid point P and I've tried it that way too, but that third coil brings out extra flavor.
BF Mods by Custom-Classic
- Thread starter custom-classic
- Start date
- th_trl_thread_readers 0
- Status
You have a valid point P and I've tried it that way too, but that third coil brings out extra flavor.
Hey DB, finished my rendition of your build I wanted to try 
Went with the triple coils but used 26G Kanthal, 7wraps each, 2.5mm ID to yield 0.29 ohms for me
I agree, wicking and airflow seemed to be the key to this build, left enough tails for juice and some room for the air to flow.
I had to trim the 2 vertical coil wicks a tad lower after I placed the topcap on it but I got to admit, I really like this build for me Just the right amount of heat and vapor production to suite my tastes with fairly decent flavor, which should get better after the wicks break in some more. Might fine tune the vertical coil positions yet to see if raising them or lowering them will affect the flavor a bit more but overall Im quite pleased with it 
After trying a ton of builds on this last night including numerous failed attempts at using that coil rake gadget for pancake coils, I gave up and went back to the slanted duals everybody likes and rocked that for the work day today
I just want to thank you both for the suggestions and helpful tips in helping me find a build I like on this RDA
Went with the triple coils but used 26G Kanthal, 7wraps each, 2.5mm ID to yield 0.29 ohms for me
I agree, wicking and airflow seemed to be the key to this build, left enough tails for juice and some room for the air to flow.
I had to trim the 2 vertical coil wicks a tad lower after I placed the topcap on it but I got to admit, I really like this build for me
Just the right amount of heat and vapor production to suite my tastes with fairly decent flavor, which should get better after the wicks break in some more. Might fine tune the vertical coil positions yet to see if raising them or lowering them will affect the flavor a bit more but overall Im quite pleased with it After trying a ton of builds on this last night including numerous failed attempts at using that coil rake gadget for pancake coils, I gave up and went back to the slanted duals everybody likes and rocked that for the work day today
I just want to thank you both for the suggestions and helpful tips in helping me find a build I like on this RDA
Glad to see you finding your vape happy place with it. Lots of folks gave up on them, many of them trying some tricky builds. I have seen them in the classifieds here for half the RRP.
Right on Drift, it always makes me happy to see somone that is willing to chase the builds in any given atty. I believe that all to often a lot of folks buy an atty and toss a build or two at only to get frustrated and walk away. Almost anyone can throw in a coil, wick up and go, but true enthusiasts take the time to bring out the very best to suit their chosen style. All it takes is a bit of patience, a willingness to play and a wee bit of thinking outside the box from the norm. The best thing of all is that we as enthusiasts have so very many options in which to choose.
I remember at one time thinking that squonking and or box style mods were for the birds and just look at me now.
I remember at one time thinking that squonking and or box style mods were for the birds and just look at me now.
Last edited:
That looks like the perfect atty for a stove top coilI just took Peng's word for it and tried these, right off the bat......
They're still in there.
Sent from my SM-N910V using Tapatalk
Variant?
You must be professional vaper.
I remember this guy, he's a professional vaper. The poor schnook.
That looks like the perfect atty for a stove top coil
Sent from my SM-N910V using Tapatalk
You lay down a build like that in a compact titanium atty and if nothing else, it'll be a hell of a ride.
Lay down something like that in a 24mm Goon and you might just hit nirvana if you don't mind draining the juice. May just have to give a six shooter set up a try just for the fun of it. That eight cylinder build is nuck'in futs. 
What would be genius would be having Narda style air slots through the body for the middle coil.
FDA BOC
Should of explained this a little better like I did earlier in the thread. The thin o'ring under the cap raises the single coil intake above the curb of the deck just enough to allow extra airflow to hit that center coil while still allowing the rotation of the cap to dial in a tighter draw and also without sacrificing noticeable flavor either throttled or wide open.
Even if the Pancake vaped like the surprise package the dog left behind on the sidewalk, you will not find a more perfect match for the TI CC...
DB get what you did there. It's a solid "rig job"and creative. Better would be actually inlets through the body to the center coil position. Even if only the negative side given the gap between the positive side and body.
I like the pancake. Really think the central coil mount is useless for a 3rd coil without a solid air feed for it though.
FDA BOC
I like the pancake. Really think the central coil mount is useless for a 3rd coil without a solid air feed for it though.
FDA BOC
What's everyone doin' for Thanksgiving?
We're stayin' in town. My folks don't live too far from us, so we'll be spending a good part of the day with them.
I'm really looking forward to it.
We're stayin' in town. My folks don't live too far from us, so we'll be spending a good part of the day with them.
I'm really looking forward to it.
Eating cranberry sauce and yogurtWhat's everyone doin' for Thanksgiving?
We're stayin' in town. My folks don't live too far from us, so we'll be spending a good part of the day with them.
I'm really looking forward to it.
- Status
