BF Odins in stock
- Thread starter ancient puffer
- Start date
- th_trl_thread_readers 0
- Status
Like I said, whenever they ship a couple hundred items, it overwhelms their postal facility. You gonna need to be patient. It's just the facts with their post office. It's been discussed in other threads. Have no worries, my stuff is with yours. It'll turn up any day or maybe a week and tracking is inaccurate.
Don't you need an LP Reo for this to work? I'd LOVE to get 1 of these for hubs if it will work on a regular REO.I just checked and Loki Labs has BF Odins in stock (30 left). You snooze, you lose
How do we LP it? lol He wants a nice dual coil and hey I've heard good stuff about this 1.Not a chance. It's 22mm. You can LP the grand yourself
There are lots of great attys once you LP
. You need to leave 3/16" from the top of the mod to the top of the catch up. Many people have done it with belt sanders and stuff or Rob can do it for you (that's what I'd recommend) and have him put in the new 510 connector while it's there 
Yeah you want the new 510 so get it all done at once.. and insted of waiting for it grab a new one and wait for that to show up first before sending it in
I believe the ones that just came back have the new adjustable 510 connector. Wish I'd have thought to have him mill his down.
Ive LP'd 5 grands so far... all using a 12" disc sander and all have been done to accommodate an odin.
If youre an SAE guy like me and you have a dial caliper just sand the catch cup down until the top of the catch cup measures .042 to the bottom next to the 510. At that point, you can mount your atty of choice and you can kiss it just a bit more with the sander to align the air holes as you prefer.
This entire process takes about 10-15 minutes. I stop frequently to dip the mod in cool water to cool it down and spray the gunk out of it with an air compressor.
When it is all done, give it a nice bath in warm soapy water before reassembly. I usually take the opportunity to install a new firing pin and new tube during reassembly.
Of course, Rob does a stellar job and mills them down with a mill. But if you have the tools...go for it
thanks
Geo
If youre an SAE guy like me and you have a dial caliper just sand the catch cup down until the top of the catch cup measures .042 to the bottom next to the 510. At that point, you can mount your atty of choice and you can kiss it just a bit more with the sander to align the air holes as you prefer.
This entire process takes about 10-15 minutes. I stop frequently to dip the mod in cool water to cool it down and spray the gunk out of it with an air compressor.
When it is all done, give it a nice bath in warm soapy water before reassembly. I usually take the opportunity to install a new firing pin and new tube during reassembly.
Of course, Rob does a stellar job and mills them down with a mill. But if you have the tools...go for it
thanks
Geo
This is consistent with my previous orders. I wouldn't be too concerned. If it doesn't change in a few days drop Craig an email and he will sort you out.
Oh, man that's going to make me sad, I don't think my LP has the fancy pants new 510 connector seeing as it's 14 months old or so. I guess I'll just think positive and hope the odin just works. If I have to send her in, I will be sad. I guess the solution to that is to order a new SL/LP first!Yeah you want the new 510 so get it all done at once.. and insted of waiting for it grab a new one and wait for that to show up first before sending it in
Shipping Label April 13th and 12:56 and nothing since.
Not happy, one damned bit.
Not happy, one damned bit.
Oh, man that's going to make me sad, I don't think my LP has the fancy pants new 510 connector seeing as it's 14 months old or so. I guess I'll just think positive and hope the odin just works. If I have to send her in, I will be sad. I guess the solution to that is to order a new SL/LP first!
All attys including the Odin work just fine on the old connector
. You just may wanna consider the upgrade in the future because larger attys can put a lil more stress on the gaskets and such in the older connections. I ran big attys with no issues for over 6 months with no issues on my old connectors and I'm sure they'd still be running for years without it.
Mine shows the same thing. I sent him an email last night & he said mine were picked up yesterday and I should get them by tomorrow or Saturday. He said he got swamped with more orders then usual. He said it literally took 2 days to get all the orders finished.
Oh, man that's going to make me sad, I don't think my LP has the fancy pants new 510 connector seeing as it's 14 months old or so. I guess I'll just think positive and hope the odin just works. If I have to send her in, I will be sad. I guess the solution to that is to order a new SL/LP first!
All Reo's in this picture have the older 510 and are handling my Odins just fine. No problems at all, you should be just fine.
Not worried, I've ordered from them before, but it was a random time so it went quick unlike everything going back in stock all at once and being overwhelmed with orders.
This is his Facebook, he replied quick to me on this page.Assuming you have Facebook. Not sure of his email
https://www.facebook.com/loki.lab.llc?fref=ts
There is definitely no cause for concern. The sheer awesomeness of the products alone make it worth the wait.
Look how long people are willing to wait for group buy clones. These are legit USA products
Look how long people are willing to wait for group buy clones. These are legit USA products
There is definitely no cause for concern. The sheer awesomeness of the products alone make it worth the wait.
Look how long people are willing to wait for group buy clones. These are legit USA products
True, but when you get an email saying it shipped Monday with priority 2 day shipping and it still only says "shipping label created" & it's Thursday that's a little ridiculous. Just sayin....
- Status
Similar threads
