Boge 510 SR Cartomizer change?

[Darrigaaz]

Good afternoon y'all,

I got my batch of Boge 510 SR Cartomizers in on Saturday, and the order was fulfilled perfectly. Outstanding experiences with Puresmoker thus far! I do have a question though...

Have the cartomizers changed in any way other than cosmetic?

The original box of cartos that I got a couple weeks ago were stainless steel and had a PS logo and SR 3.0ohm stamped on it. It looked very stylish and was also very easy to see that it was a SR carto that I was using/refilling/swapping. They also perform beautifully, and I made the decision to order from Puresmoker for all my blank carto needs from the moment I took my first couple of puffs from these cartos.

The latest cartos I just received are packaged the same way and come in the same looking boxes. But, the one I've opened is a darker stainless steel, and has no identifying stamp on it of any kind. No logo and no ohm label. The carto works just like the previous ones I've received, and I'm not complaining in any way. I'm very happy with my purchases and the products I've received.

I'm just curious if there was any other change to the manufacture of these. I'm pretty sure I got the same resistance, since the boxes are labeled with SR and they don't taste scorched like LR cartos do at 6v.

 

[CaSHMeRe]

Hey Darrigaaz ...

About two weeks ago, we got a shipment in with all logo's (before that, all carto's came just blank) We still have quite a few blank ones left, so those are being liquidated before the logo ones take full effect

Once the logo ones take full effect, the picture on the site will change to that of the logo's

Happy to see you like the logo's though!

 

[Darrigaaz]

I've been happily vaping away on both a logo one, and a non-logo one, and they both are great! I'll definitely order again regardless of if they are logo-ed or not.

 

[BigCypress]

hey guys,

do you happen to know what the sticker on the top of the box of "atomized cartridge" says for the stainless 510 lr or the stainless 510 3.0?

The reason i ask is because i just recieved 3 boxes of stainless ( not from this supplier) and they were supposed to be 2.0 lr . However after using 2 of them i realized they were weak and acting like a 3.0 .

My box says 510D stainless

all the other cartos i've received have specified 2.0 ohm for the lr

Thanks, and sorry to threadjack

 

[Katya]

Every box of 2.0Ω Boge cartomizers I ever got had a sticker reading: 510D 2.0ohm.

Do you have a multimeter?

 

[hairball]

If all you box says is 510D, they are standard resistance (3ohm). LR's will be marked 510D 2.0ohm.

 

[BigCypress]

thats what i thought. The supplier is trying to tell me that they are 2.0 and he is giving me attitude.
I don't have a multimeter, but i'm gonna go see my bro that does. I"m gonna give it to this supplier when i have all the proof.

 

[redcat1948]

If all you box says is 510D, they are standard resistance (3ohm). LR's will be marked 510D 2.0ohm.

I just got 2 boxes marked 510D with "LR" handwritten next to that which were advertised as 2.0. Last week I got 3 boxes just marked Lr510 advertised as 2.0 but they are burning my coffee flavors unlike the boxes marked 2.0 that don't burn. Someone here on ECF says true Boge LR are 1.5 to 1.8 ohms which can make a difference on a Riva which is what I have. So now I have 5 boxes of cartos I can't use. I REALLY wish these vendors would do a better job of knowing what they are selling and advertising products correctly! I guess I'll have to go back to Liberty Flights to make sure I get what is advertised!

 

[CaSHMeRe]

Someone here on ECF says true Boge LR are 1.5 to 1.8 ohms which can make a difference on a Riva which is what I have.

that someone must not be too knowledable then .... The LR Boges we order are rated at 2.0ohms (1.9-2.1 ohms) If you'd like the contact info to Boge, feel free to ask , i'm more than happy to pass that info your way so you can confirm yourself. I've asked for lower resistance than the standard 2.0 ohms, and they have flat our refused to make them. If you are getting 1.5 - 1.8 ohm "Boge" cartomizers -- I'd personally question the authenticity, simply because I can't get them and I communicate directly with Boge, not a 3rd party service that many vendors may order from.

none of the boxes we sell say "510D" or whatever. ours state "510 BLACK SR" or "510 STAINLESS LR" etc...

I've never seen Boge boxes with "510D" on them?

 

[redcat1948]

[/QUOTE]none of the boxes we sell say "510D" or whatever. ours state "510 BLACK SR" or "510 STAINLESS LR" etc...

I've never seen Boge boxes with "510D" on them?[/QUOTE]

The very first cartos I received were with a Liberty Flights starter kit - They say "510D 2.0 ohms" on a little sticker. The ones I received today say 510D on the sticker with LR written in pen. I contacted Clouds of Vapor to make sure they were 2.0, they say Boge forgot to put it on the sticker, I just tested one and it vapes just like all other Boge 2.0's. The boxes and everything else about the cartos appear genuine. There should not be this much confusion about a product. Boge should put the ohms on every darn box so I don't have to guess whether a vendor knows what he's selling or not. I am sold on the quality of Boge so I guess I'll deal with it. Happy vaping!

 

[redcat1948]

This is the quote I found from Katya, (PV Master, ECF Veteran): " Boge cartos come in LR (1.5, 1.7, 1.8Ω), Moderate (2.0 and 2.5Ω), Standard (3.1Ω) and High (3.4Ω). They are great cartomizers. Boge makes cartos with 510, kr808D-1, and 4081 connections. Different vendors have them made to their specifications and sell them under different names. "

This is in the General E-Smoking Forum, thread name "Boge Cartomizer? Really?" if you want to read the thread. Any more frustration I'll give up and go back to my Marlboros. Only joking..... All you vendors out there....DEMAND THAT YOUR BOGE CARTOS BE LABELED WITH OHMS PLEASE!!

 

[CaSHMeRe]

The very first cartos I received were with a Liberty Flights starter kit - They say "510D 2.0 ohms" on a little sticker. The ones I received today say 510D on the sticker with LR written in pen. I contacted Clouds of Vapor to make sure they were 2.0, they say Boge forgot to put it on the sticker, I just tested one and it vapes just like all other Boge 2.0's. The boxes and everything else about the cartos appear genuine. There should not be this much confusion about a product. Boge should put the ohms on every darn box so I don't have to guess whether a vendor knows what he's selling or not. I am sold on the quality of Boge so I guess I'll deal with it. Happy Vaping!

As stated ... Every single box I have ever gotten from Boge has been Marked ... "510 Stainless LR" .... "510 Stainless SR" .... so on and so forth. I have NEVER received anything different. If you'd like me to take a picture, I'm more than happy to so you can actually trust me when I say something.

This is in the General E-Smoking Forum, thread name "Boge Cartomizer? Really?" if you want to read the thread. Any more frustration I'll give up and go back to my Marlboros. Only joking..... All you vendors out there....DEMAND THAT YOUR BOGE CARTOS BE LABELED WITH OHMS PLEASE!!

o ... you mean like ours?

your talking about different vendors stuff in our subforum, I don't completely understand why?

 

[redcat1948]

Sorry, I was responding to the thread title and didn't realize it was vendor specific. I like your logo and the carto is cool. Will check out your website. Again, sorry. You have to forgive us newbies to ECF.

 

[CaSHMeRe]

Sorry, I was responding to the thread title and didn't realize it was vendor specific. I like your logo and the carto is cool. Will check out your website. Again, sorry. You have to forgive us newbies to ECF.

haha ... no worries RedCat ... I'm just givin ya a hard time

appreciate the kind comments!