Box Sx350mini Yihi chip @ bonmatos

[bonmatos]

Hi
I'm french and I share with you my information on the mini SX350 Yihi
This is 2 videos (in french sorry )

 

[bonmatos]

 

[david4500]

Hi
I'm french and I share with you my information on the mini SX350 Yihi
This is 2 videos (in french sorry )

Fixed your video link

 

[david4500]

And this one also

 

[bonmatos]

You can see my vidéo on my Facebook page : https://www.facebook.com/bonmatos

 

[Visus]

wow they shrunk it down and new baller screen.

Looks cool and will make for some smaller mods..

 

[bonmatos]

I just saw that SXmini (box) and SX350mini (chip) have 2 different firmware

so 2 different updates... There is the Mini and the MINI as firmware, so be careful

 

[bonmatos]

I tested the SX350mini with mounting bi voltage (3.7 Volt and 7.4 volts with a switch) with the 9V balance charging board

 

[rhelton]

Very cool.............bonmatos how is the charging time with the new board.

 

[bonmatos]

I do not know, I have never done a full charge...
necessarily more long... but you load fewer
Balance charging supports dual battery 4.2v and has charging output of 450mA per cell.
I made this Assembly to make 2 voltage tests... just a test (the wires are too small)

 

[asdaq]

Thanks for sharing this bonmatos. I've pretty much ignored the Yihi chips on account of the large size, but 40 x 16.6 is much more reasonable, is there an on board fire button, and does it come with that charger unit? Sorry for the ignorance.

 

[rhelton]

Yes it does to all your questions. I am not sure of a vendor in the EU but Welcome to VariTube.com - A Better Alternative to Smoking can get you a unit to where you are they ship overseas and have all the supplies you will need to build one.

 

[rhelton]

I do not know, I have never done a full charge...
necessarily more long... but you load fewer
Balance charging supports dual battery 4.2v and has charging output of 450mA per cell.
I made this Assembly to make 2 voltage tests... just a test (the wires are too small)

Ok thank you

 

[BlueridgeDog]

The "J" version of this chip is due out in March/April with temp. control for nickel wire.

 

[bonmatos]

The new Logo Changer for the chip SX350Mini

 

[bonmatos]

New data file Under the vidéo

 

[bonmatos]

The logo changer for SX350J is on youtube (only for the chip)

 

[bonmatos]

 

[bonmatos]

I have broken the fire wire
tomorrow welding