I have kept quite a few of the glass bottles of e juice that come with droppers. I am glad i did because i use them to hold juice from the bigger bottles that humble juice co uses. I am not sure what that style of juice bottle is called but i assumed it was for dripping. My old devices and my big baby beast tanks work best with droppers and generally i spill a lot with the other style.
So i was filling the tank on the g150 mod and heard a little crunch. I thought i had just pushed it in the silicone top too hard or whatever. I noticed that i was spilling a lot when i was trying to continue filling it though.
A while later i realized that i had broken off the very bottom of the dropper and that there was probably a piece of glass in my tank! Sure enough there was. I tried to dump out the contents before removing the glass piece but it wouldn't dump out. When i took the bottom off the tank the air rushing in finally allowed the juice to release... All over myself and the table. I am not concerned about the nicotine exposure as it was only max 5 mils of 3 mg juice but I am annoyed i wasted a tank full of it. It takes forever to order sometimes and I am almost out now.
Anyways that's my story. I didn't get cut so that's good. Also the silicone top to the tank is now rough around the pour hole and it spills a bit when filling. I think the small cut from the glass messed it up and i should think about changing it out. I will probably wait until i find a place to order another backup first just in case.
I changed the coil during this process too. I am a little worried about small pieces of glass in the cotton. I had taken 700 puffs off the coil anyway so it was on it's way out.
If I hadn't had this incident i might have kept using that coil for another day or two because it wasn't that bad and i am cheap.
I guess my lesson is to be more careful.
So i was filling the tank on the g150 mod and heard a little crunch. I thought i had just pushed it in the silicone top too hard or whatever. I noticed that i was spilling a lot when i was trying to continue filling it though.
A while later i realized that i had broken off the very bottom of the dropper and that there was probably a piece of glass in my tank! Sure enough there was. I tried to dump out the contents before removing the glass piece but it wouldn't dump out. When i took the bottom off the tank the air rushing in finally allowed the juice to release... All over myself and the table. I am not concerned about the nicotine exposure as it was only max 5 mils of 3 mg juice but I am annoyed i wasted a tank full of it. It takes forever to order sometimes and I am almost out now.
Anyways that's my story. I didn't get cut so that's good. Also the silicone top to the tank is now rough around the pour hole and it spills a bit when filling. I think the small cut from the glass messed it up and i should think about changing it out. I will probably wait until i find a place to order another backup first just in case.
I changed the coil during this process too. I am a little worried about small pieces of glass in the cotton. I had taken 700 puffs off the coil anyway so it was on it's way out.
If I hadn't had this incident i might have kept using that coil for another day or two because it wasn't that bad and i am cheap.
I guess my lesson is to be more careful.