Buzz Pro II and Buzz Pro Lightning BOTH APPROVED BY ECF

[BuzzKill]

Mike will you continue to sale the powerizer batteries for those of us who know they are safe or should i stock up now?

I still have some , we will be changing over to a Trustfire black flame protected battery , it has about 90% of the capacity with the protection , we ONLY sold the Powerizers because they were the BEST battery out there capacity wise AND we have full protection built into the Notcigs products , this protects the battery . They are NOT CHEAPER they are BETTER .

I would in no way suggest you use these in ANY other device .

 

[uzzaperez]

Okay...so I haven't been foruming much lately...wtf are BPII and BPL? Scanning the thread the only thing I see is a minor change from vent holes to vent slots to meet some standard I could care less about...but if that's all, whats the difference between BPII and BPL?

Edit: Also saw some interesting discussion on Pro Vari in here. There's a key point about the Pro Vari for me...if you don't prefer a 510 there is no such thing as a Pro Vari e-cig, just a Pro Vari paperweight. There's also a mini paperweight for when less wind is blowing.

 

[vespaguy]

not at all i plan on using the powerizers only for my buzz pro since they are the best i have two sets now but will buy a couple more sets next payday before they are gone

 

[BuzzKill]

Okay...so I haven't been foruming much lately...wtf are BPII and BPL? Scanning the thread the only thing I see is a minor change from vent holes to vent slots to meet some standard I could care less about...but if that's all, whats the difference between BPII and BPL?

Edit: Also saw some interesting discussion on Pro Vari in here. There's a key point about the Pro Vari for me...if you don't prefer a 510 there is no such thing as a Pro Vari e-cig, just a Pro Vari paperweight. There's also a mini paperweight for when less wind is blowing.

The ONLY difference is the slots Uzza thats it

 

[arkador]

I actually am an engineer, can afford to buy whatever I want, and I honestly believe the current notcigs products are the best stuff out now.

I am an electrical engineer. I compared the technical side of the BP and Provari (The best Buck vs the best Boost) Look at my avatar..... nuff said.

The only Boost mod I would buy, is the one that Mike may eventually make.

 

[LordDavon]

The ONLY difference is the slots Uzza thats it

Well, wait a second... One is new, and it makes you cool! The other one is brand new, and makes you cool!

I can't believe that you people don't know that.

 

[c623cc]

I bought another couple of sets of batteries earlier myself VG just because I get crazy vapetime out of them and am not looking to change that in any way.I am getting somewhere around a complete day(minus my short time sleeping).So,probably closer 19-20 hours and that is with a "stardust"(with coil/wick I have made)hovering between 3.7v-4.2v.I looked at some figures on P.Busardo's new "tasteyourjuice.com" site and the Powerizers by far outperformed any others tested.

 

[gtianz]

After doing a lot of reading and research I decided to go for it and buy a Buzz Pro!

I was initially very confused and scared of the "stacked" batteries. But, all the excellent explanations about the safety measures used in the NotCigs units I feel very confident that I made the right purchase. And being the first "ECF Approved" mod really does speak volumes about the quality of your design prowess.

And, after reading so much I felt confident that the original design is sufficiently safe.

Looking forward to joining the NotCigs family!

Ian

 

[markfm]

The base buzz pro is indeed a really nice pv with lots of good safety features. Most pv out there don't come close in terms of safety being designed-in.

 

[Bovinia]

Congratz Ian and welcome to our family!

 

[BuzzKill]

After doing a lot of reading and research I decided to go for it and buy a Buzz Pro!

I was initially very confused and scared of the "stacked" batteries. But, all the excellent explanations about the safety measures used in the NotCigs units I feel very confident that I made the right purchase. And being the first "ECF Approved" mod really does speak volumes about the quality of your design prowess.

And, after reading so much I felt confident that the original design is sufficiently safe.

Looking forward to joining the NotCigs family!

Ian

Very COOL , I am glad the message is getting across now.

Thank you
Buzzkill

 

[Troll from behind]

Just wanted to post my ordernumber #4394 to proof I stand behind my word.
Damn, should have had the word "unsafe" engraved.

 

[Bovinia]

LOL Troll!! Congratz and welcome to our not so humble abode

 

[BuzzKill]

Just wanted to post my ordernumber #4394 to proof I stand behind my word.
Damn, should have had the word "unsafe" engraved.

Or PIPE BOMB !! no J/K J/K !!!!!

 

[Troll from behind]

Hmmm, should I be worried of gettin something more than I paid from?

 

[LordDavon]

Or PIPE BOMB !! no J/K J/K !!!!!

I love it!!! HA! Although, when I get my Buzz II, I want LordDavon inscribed. That will be awesome to have on it, on my videos. Oh, that reminds me....

You will send me a Buzz Pro II for review!

Why isn't this working!!!

Oh Mike, I will PM you about it.

 

[Wharf Rat]

Or PIPE BOMB !! no J/K J/K !!!!!

Or Da' Bomb !!!

 

[markfm]

Question from over in the Buzz subforum: I see the new buzz pro 2 coming out soon will there be a infinity pro 2 with the sweet looking lighting bolts desing?

 

[LordDavon]

Question from over in the Buzz subforum: I see the new buzz pro 2 coming out soon will there be a infinity pro 2 with the sweet looking lighting bolts desing?

I have to admit, that it does look pretty sweet! I asked Buzz, if there would be Laser Engraving. Not sure if it was asked before.

 

[Bovinia]

I believe Mike said he's not going to do the IPro right now...but I could be mistaken...it happens often