Can the bridge on the LR901 be flattened?

[caged]

I have some drip carts I want to try, but the bridge on the atty is too tall. I've heard you can flatten the bridge on some attys. Is that doable on the LR901 without harming it too much?

If so, what is the best way to go about it?

 

[loft]

TBH I've never tried. Only time I used 901's, I used a drip shield and drip tip. Removing or flattening the bridge might complicate things... I don't know much about them though. Wish I could provide more info.

 

[Switched]

Define drip carts? A standard 510 drip tip will fit any 901 just fine, no need to flatten the bridge (which will not be easy to do) and possibly damage the atty's seal.

 

[caged]

Define drip carts? A standard 510 drip tip will fit any 901 just fine, no need to flatten the bridge (which will not be easy to do) and possibly damage the atty's seal.

It's a cart that holds liquid and is designed to drip when you hold a button and create negative air pressure. It's not a drip tip. I may have my terminology mixed up as I have no experience with atomizers, but the chain mail looking arch in the atty is pushing up against a small piece of filler and a silicone gasket on the drip cart.

 

[5cardstud]

I think I'd make a short extension for using it instead of messing with the bridge.

 

[Switched]

OK, yes I heard about them. I wouldn't mess with the bridge.

 

[Iken]

+ a few, if you plan to modify something you always have to be prepared to sacrifice it for knowledge. I don't think it would cause harm but then again you have to figure just how far you're flattening it. If it is too low, like the bridge being pushed into the reservoir, you have high chances of killing it by stopping the liquid from getting it to the heating core. Maybe find something like a straight drip tip to wedge between the two pieces?

 

[caged]

This atty looks too good to sacrifice.....Do you sell straight drip tips? I see you have more LR Fusions in stock and am extremely tempted to order some so if you have the drip tip I will probably make an order.

On my last order, you told me to let you know how the new 510-808/901 adapter is working. It's definitely working better than the last, but I think part of my problem is my PV. It's made by SmokTech and I think the threads are screwed up. I only get half a turn on some cartos before full tightness and some of the 510 Gold V2 cartos don't catch at all (the draw is really tight on the ones that do too). The threads on this unit seem to be getting worse so I need to order something soon. On the other hand, I don't really want to order another battery until your Ikon system is released so I have a bit of a dilemma. Will you be releasing the Ikon as soon as you get back or will the system be delayed for revisions? If the rest of the threads go before I get a new battery/system, I'm screwed.

I'm really unimpressed with SmokTech. Even their dual coil cartos didn't fit the unit right -- about half the cartos I ordered did not work on the e-power, and both are manufactured by the same company which makes it even worse. I can tap the sides of the SmokTech cartos and they come off the connector.

 

[caged]

One more question -- have you thought about making an easy auto drip system? I'd love to see what you could come up with.

 

[caged]

Oops. You're officially closed. I guess I can order a new switch for the E-Power and when I order the Ikon, at least I'll have a (hopefully) reliable backup.

 

[Iken]

lol just because I'm closed it doesn't mean I'm not sticking around for CS.
For the drip system. Yes, we have been working on a tank to go with the Project name: Chameleon. I don't know at this point if it can be used as a stand alone, but I do have a friend that wants to make a project of a similar system.

I know what you mean about the E-power, Mwa and I met in person for the first time at Vapefest in VA. We both picked a couple and they died in the first few moments. If you want to pick up something quick and what could be reliable. I believe liberty flights has their Ego's for $35? Also just found this one, I don't know anything about it but from what I gather it is a mechanical mod starter kit. A mechanical device uses metal plates to push the battery into circuitry. Which should make it nearly immortal with a little bit of maintenance of course http://sparkplugforsmokers.com/store.shop/catalog/4 for only $40, with batteries and charger, it should be a good deal. If you want to get into it. Please check for reviews first.

 

[caged]

lol just because I'm closed it doesn't mean I'm not sticking around for CS.
For the drip system. Yes, we have been working on a tank to go with the Project name: Chameleon. I don't know at this point if it can be used as a stand alone, but I do have a friend that wants to make a project of a similar system.

I know what you mean about the E-power, Mwa and I met in person for the first time at Vapefest in VA. We both picked a couple and they died in the first few moments. If you want to pick up something quick and what could be reliable. I believe liberty flights has their Ego's for $35? Also just found this one, I don't know anything about it but from what I gather it is a mechanical mod starter kit. A mechanical device uses metal plates to push the battery into circuitry. Which should make it nearly immortal with a little bit of maintenance of course All Products | SparkPlugforSmokers.com for only $40, with batteries and charger, it should be a good deal. If you want to get into it. Please check for reviews first.

Sorry, I meant you were closed so I couldn't get more LR Fusions -- but I can when you get back.

Thanks for the advice.