Carto help pls :/

[rith]

After priming the cartomizer and then putting it in a ibtanked and then you vape after , is it suppose to look non soaked or dry kindah on top of the cartomizer ? Pls let me know if this is ok :/ it taste fine and has the regular sizzle spud but the look is suppose to be kindah slushy on top of the cartomizer right ?


Sent from my iPhone using Tapatalk

 

[sawlight]

It's fine, they normally do dry out on the top a little, remember it's a bottom feed.

 

[Ladiekali]

Yes. It will not continue to look like a slushy.
Try taking a tooth pick if you have one and kinda tap down and you will see the juice.

This was very confusing to me in the beginning and i was constantly topping off.

Unless it tastes burnt its probably working fine.

 

[mackman]

Try this Taste Your Juice | Filling Boge 510 Cartomizers

 

[rith]

Yes. It will not continue to liik like a slushy.
Try taking a tooth pick if you have one and kinda tap down and you will see the juice.

This was very confusing to me in the beginning and i was constantly topping off.

Unless it tastes burnt its probably working fine.

It is always nice to hear from you lol


Sent from my iPhone using Tapatalk

 

[rith]

Try this Taste Your Juice | Filling Boge 510 Cartomizers

Watch that along time ago don't have any condom to it that way lol so I have to drip it from the top :/


Sent from my iPhone using Tapatalk

 

[Ladiekali]

Dont u fiddle with your thingy?

 

[rith]

Dont u fiddle with your thingy?

Idk how I use the thingy :/ is there a video ?


Sent from my iPhone using Tapatalk

 

[Ladiekali]

Dont know if there is a video...
Its the cannister your ibtank came in.
Fill your carto, assemble your tank, fill your tank, place in the plastic tube aka thingy.
Screw on the lid, unscrew, rescrew, if you look inside while you do this you will see bubbles in the tank come up threw the bottom holes of the cart.
It is filling your carto from the bottom.

 

[suspectK]

I always had to top off cartos with most liquids I use.. only thing worse than a dry carto is a burnt carto, and I try to give them as much time saturating I can before vaping..prime with a syringe. I recommend baditude's method until you get more familiar with them.

When I was still using them, I'd check them in the morning. If they were really dry, I'd give them a drop or two on filler. I finally gave up on them for most of my personal use. Girlfriend asked me if hers tasted dry last night.. before I took a pull, I just said yes, because the tank is empty.

 

[yzer]

The tops of my cartos look "slushy" after I prime them, put them into IBtanked and fill the tank. However, the very top of the carto will not not retain the wet shushy look for long after I begin vaping. This is normal. It is only the very top of the filler material that looks a little dry. Add four or five drops of liquid to the carto and it will look slushy again but this is not needed for excellent operation of the carto tank.

Using a carto alone is different from using a carto in a carto tank. Cartos alone need frequent topping-off for maximum life and maximum vapor production. Properly punched or pre-punched cartos in a carto-tank don't require topping-off.

 

[rith]

The tops of my cartos look "slushy" after I prime them, put them into IBtanked and fill the tank. However, the very top of the carto will not not retain the wet shushy look for long after I begin vaping. This is normal. It is only the very top of the filler material that looks a little dry. Add four or five drops of liquid to the carto and it will look slushy again but this is not needed for excellent operation of the carto tank.

Using a carto alone is different from using a carto in a carto tank. Cartos alone need frequent topping-off for maximum life and maximum vapor production. Properly punched or pre-punched cartos in a carto-tank don't require topping-off.

Thank you this is very helpful


Sent from my iPhone using Tapatalk

 

[Train2]

My IBTank came with a whole little brochure that explained how to fiddle with your thingy!
And it works great...

You got it right though - it dries out on top - not a problem! As long as you got it primed well, it'll keep pulling in juice from the hole, which is near the bottom...