carto with replaceable atomizers
- Thread starter edyle
- Start date
- th_trl_thread_readers 0
- Status
Cartotanks use either pre-punched cartomizers, or you can use un-punched cartomizers if you punch them yourself with a carto punch tool or slot them with a powered Dremel tool. The cartomizers are replaced in the cartotank every 2 - 3 weeks.
You can't replace the atomizer and the filler in the cartomizer. They are not constructed to be rebuildable in that sense. They are considered a one-time use item, and disposable. Cartomizers are relatively inexpensive, generally $2 each for the pre-punched variety when purchased online. They will be more expensive in e-cig B&M stores.
pre-punched cartomizers/tool-punched cartomizer/carto punch tool
You can't replace the atomizer and the filler in the cartomizer. They are not constructed to be rebuildable in that sense. They are considered a one-time use item, and disposable. Cartomizers are relatively inexpensive, generally $2 each for the pre-punched variety when purchased online. They will be more expensive in e-cig B&M stores.
pre-punched cartomizers/tool-punched cartomizer/carto punch tool
Last edited:
What you are looking for doesn't exist, as far as I know...
However, there are rebuildable carto/atomizers.
DIVER - REBUILDABLE ATOMIZER FRA GRÆSKE ATMISTIQUE
Sophia Advanced Repairable Atomizer | Ecig Life
may be others out there.. these are the only 2 I know of.
However, there are rebuildable carto/atomizers.
DIVER - REBUILDABLE ATOMIZER FRA GRÆSKE ATMISTIQUE
Sophia Advanced Repairable Atomizer | Ecig Life
may be others out there.. these are the only 2 I know of.
Never ceases to amaze me when somebody says something doesn't exist then shows you a picture of it!
The short thing on the right would be the atomizer, right?
The thing on the bag is the ceramic cup which holds the coil. It's a rebuildable. It is awesome. It tastes better than a disposable cart. It taste better than my drippers too. If you can rebuild coils I would definitely recommend it. I do want a sophia, basically the same idea but better because it has adjustable liquid feed.
Sent from my GT-I9300 using Tapatalk
Sent from my GT-I9300 using Tapatalk
ΣΟΦΙΑ repairable atomizer for tank
Can also be used as a dripping atomizer with juice flow control closed and without tank.
The Sophia Rebuildable Atomizer by Leo **Discussion & Tips**
Edit to add: it is 45 mm long, which works well with a 35 mm carto tank, allowing you to push the atomizer base out of the tank, screw it off and work on it, while the tank is still sealed at both ends by the tube. With a 45 mm tank, you'll need a straight drip tip at least 10 mm long to accomplish the same feat.
The base is also sold separately and can be purchased with a 5 mm longer tube that is finished up top as a drip tip. This wouldn't be used with a 45 mm tank.
Can also be used as a dripping atomizer with juice flow control closed and without tank.
The Sophia Rebuildable Atomizer by Leo **Discussion & Tips**
Edit to add: it is 45 mm long, which works well with a 35 mm carto tank, allowing you to push the atomizer base out of the tank, screw it off and work on it, while the tank is still sealed at both ends by the tube. With a 45 mm tank, you'll need a straight drip tip at least 10 mm long to accomplish the same feat.
The base is also sold separately and can be purchased with a 5 mm longer tube that is finished up top as a drip tip. This wouldn't be used with a 45 mm tank.
Last edited:
Never ceases to amaze me when somebody says something doesn't exist then shows you a picture of it!
The short thing on the right would be the atomizer, right?
Those are not the same as the standard Carto with poly filler. Nor is there "filler" at all. It's a coil and wick RBA in a carto size.
Add filler but make sure you leave a air tube in the middle and it's exactly what your asking for and btw makes the v1 diver a lot better
Just now, cotton wicked my diver for the first time.
Sent from my GT-I9300 using Tapatalk
Sent from my GT-I9300 using Tapatalk
- Status
Similar threads
