Ce2.3.rev5's clearomizers,fluxomizers.pretty much the same?

[jweavers]

Okay,all the different names for all the kinda same product?If I describe the clear tube(that always cracks) with thread and top burning atomizer-outside of these ce2 that come in ste,sel then what is the difference in the fluxomizers and the clearomizers.Is it a vendor change of name?

In any case I need to get bigger ones.I only have the little guys(fluxomizers)and I'm tired of filling them,so maybe something in extra large.What's the newest,best working one called?I have a kr-808d1 battery.,Yes I know there is tweaking involved,I'm okay with that.I have a juice coming that just tastes better in a fluxomizer.

Also just wanted to know if there is a way to not have the ceramic cup and black holder not end up sliding up and down on the air tube.All,I mean all of my little guys that I have now slide up and down.It really cuts down on the juice area.Maybe I just bought an older model as I purchased these locally and at a premium price.

 

[StotheK]

Fluxomizer is GotVapes brand name for the CE2s. There is a standard size and XL size. There's also a 3.5ml version called the giantomizer (rebranded as maximizer at GotVapes) which is designed for eGos and has a steel outer sleeve.

And while we're on the subject, GotVapes also has the Vision which is a clear version of the giantomizer which doesn't have the sleeve so it's compatible with most 510 models. I've seen others carry what is branded as the Vision but I don't remember the generic name for it.

 

[jweavers]

I went ahead and ordered the fluxomizers again from GotVapes as they have the kr-808 threading and I went ahead and ordered the extra thick tubes for those.Still can't figure out how to be more gentle with them to keep the black plastic glove area that is connected to the ceramic tube from getting loose and sliding up and down though.I'll work through it,and at worst,toss them early if I have to.Tossed two a few minutes ago as one wire was loose and the other just wouldn't fire up after cleaning.I have to say the GotVapes shipping was very reasonable-two bucks.

I saw those giantomizers and sapphires and really the vortex peeked my interest.Although I think the vortex is just like a G4.I guess it can just be a little confusing.Some things look very similar,almost just alike-but unless you have ordered it or have read somewhere on here then you can't be 100 percent sure.

I'm thinking about getting a mod sometime soon and I just need something to keep me going until I make up my mind which mod I'll go with,or should I say,which one I'll go with first!

 

[StotheK]

A very odd story behind the Vortex/G4 thing apparently. Anyway GV had the G4s first (and they branded them the Vortex, they rebrand everything for the most part). The Vortex had a filler in them to help with the leaking. Others got a hold of them, without the filler, you got the G4. There's allegedly a revision 2 of the Vortex coming out soon, so who knows.

As for mods, everyone has a favorite, so I'm sure you'll hear lots of opinions I have a few from simple box mods to the Icon and the Provari, I kind of like them all I guess it depends on your budget and what you want it to do

 

[JD1]

I have some of the bauway ce2 clones coming from Madvapes. I want to see if they last any better than my last pack of RS. I first tried the ce2s at 3.0 ohm and they are fine with my 5v PT but underpowered with an eGo or e-power. Recently I ordered some 2.6 ohm (2.7 on my meter) and they vaped great on the e-power, but only lasted 5 and 6 days apiece. That's not bad but I'm hoping the boges (2.5 ohm) do even better. The 3.0s lasted really well, I still have four of the five working. They're tossed in a box for now because my PT is broke.

I have and like the e-power, so naturally I recommend it a lot. I have to admit I like the looks of this mod tho: (Post #7 from almightygod) http://www.e-cigarette-forum.com/forum/new-members-forum/209395-time-large-device-but-one.html

 

[Nomoreash]

I have some of the boge ce2 clones coming from Madvapes. I want to see if they last any better than my last pack of RS. I first tried the ce2s at 3.0 ohm and they are fine with my 5v PT but underpowered with an eGo or e-power. Recently I ordered some 2.6 ohm (2.7 on my meter) and they vaped great on the e-power, but only lasted 5 and 6 days apiece. That's not bad but I'm hoping the boges (2.5 ohm) do even better. The 3.0s lasted really well, I still have four of the five working. They're tossed in a box for now because my PT is broke.

I have and like the e-power, so naturally I recommend it a lot. I have to admit I like the looks of this mod tho: (Post #7 from almightygod) http://www.e-cigarette-forum.com/forum/new-members-forum/209395-time-large-device-but-one.html

What do you mean by only lasting 5 or 6 days, the coil burnt out or something else? If it's not the coil most likely they can be restored to new by cleaning. These things keep lasting for me and many others with regular cleaning and a dry burn.

 

[JD1]

What do you mean by only lasting 5 or 6 days, the coil burnt out or something else?

Coil burnt out. (shows open on my meter). What ohm range are you using?

http://www.e-cigarette-forum.com/fo...n/203094-ce2s-dying-too-fast-suit-me-sad.html

 

[Nomoreash]

Coil burnt out. (shows open on my meter). What ohm range are you using?

http://www.e-cigarette-forum.com/fo...n/203094-ce2s-dying-too-fast-suit-me-sad.html

I've got some that measure 2.6 and some that measure 3.1. Can't quite figure that one out because I ordered 2.4-2.6 and the box as marked as such and they came from the same box. Isn't really an issue with me as I use a vv so I adjust accordingly. If it had a fixed volt I would have probably returned them.

I usually use the 2.6 ohm around 3.7-3.9v and the 3.1 ohm anywhere from 4.2-4.6v.

Strange that your coil burned out so fast. That's one of the things I love about them how robust the coil is. I've punished these things with dry burn after dry burn and they keep going.

 

[JD1]

I had started wondering if the lower resistance was the cause, but if your 2.6 ones are lasting, I must have just got a bad batch. I'll post on the bauway clones in about a week or so.

 

[Nomoreash]

I had started wondering if the lower resistance was the cause, but if your 2.6 ones are lasting, I must have just got a bad batch. I'll post on the bauway clones in about a week or so.

Resistance shouldn't matter to much if you are using it at it's suggested range watts, until you get into the really low ohms where the coil is less robust but CE2s don't go that low.

 

[Nomoreash]

douple post