CE4+ replacement wicks

[Urge]

I am looking for wicking material for the CE4+. I measure it at approx. 1/32" (.79mm) diameter. I think it is silica based but not sure. I am open to ceramic braided wick but can't find anything under 1/16". Looking for options for wicking material that is close to that size? If you have bought larger sizes and unbraided it, what is the diameter of the individual threads? Anybody, if you have rebuilt CE4+ cartos what did you use and are you happy with it?

Urge

 

[notsmoking]

Check out this thread and you should find some good info... you could start about half way thru and get alot of good info
http://www.e-cigarette-forum.com/forum/modding-forum/284030-wick-materials-safe-vs-dangerous.html

 

[Urge]

I read parts of that thread but they are focused on cotton wicks and with a CE4+ I would be replacing the wick twice a week because you can't dry burn the cotton. I am interested in silica or ceramic wicks.

Urge

 

[Cool_Breeze]

I'm favor cotton per the study done on silica and my own experience. However here's a source of prewound silica wicks.
Pre-Wound Wicks and Wires

 

[Urge]

I am looking for wicking material in bulk(well, say 10-30') per my first post.

Urge

 

[TomCatt]

Silica Wick material for DIY

 

[Lastlokean]

Mcmaster-Carr for cheap bulk hard to find material such a silica rope and stainless steel mesh.

But seriously I have had amazing results lately with all my ce4s that have been rebuild with silica wick wrapped in ss mesh, oxidized and then coiled.