CE5 wickless is leaking like crazy! Help

[tattedhypebeast]

Hey everyone i been using the CE5 wickless for no longer than a week now and i tried giving it a few days because maybe i was doing something wrong. but im pretty sure im not pouring any juice in the center hole and im not overfilling above the line when im refilling. Can anyone please suggest any other better 510 threaded wickless clearomizers than this? Im about to take everything apart to see what the problem is, so please bare with me if i dont reply back in time. Thank you

This is the clearomizer that i am using
Goodejuice 650mAh TWIST eGo CE5+ Blister Kit [GJEGOCE5BLSTR650TWST] - $20.99 :

 

[tattedhypebeast]

Oh and also i have cleaned it already using water and letting it air dry for a few hours and after its dry enough i dry burn it. Do you think its water thats leaking? because when i blow out onto a tissue paper i see a dark liquid come out and im not sure if thats the water

Sometimes when the battery is not connected i take a drag to see if theres any gurgling and theres nothing, but when i put the battery on thats when the gurling happens. and before i use it i used a tissue to dry the both parts where the battery and the clearomizer (not sure what its called lol) connects

 

[bacc.vap]

I don't think there is anything that's truly wickless. Hard to tell with the picture , but if that's what I think it is, it has a steel mesh wick wrapped around a silica cloth. You might want to try taking the CE5 off the battery and sealing the bottom with your finger or thumb while you take a few tokes on it, that might pull the juice up to where it needs to be. Worth a try. Why do you want wickless?

 

[tattedhypebeast]

I don't think there is anything that's truly wickless. Hard to tell with the picture , but if that's what I think it is, it has a steel mesh wick wrapped around a silica cloth. You might want to try taking the CE5 off the battery and sealing the bottom with your finger or thumb while you take a few tokes on it, that might pull the juice up to where it needs to be. Worth a try. Why do you want wickless?

I just think its more easier for a noob like me lol and less of a hassle? Please correct me if im wrong though

 

[tattedhypebeast]

I don't think there is anything that's truly wickless. Hard to tell with the picture , but if that's what I think it is, it has a steel mesh wick wrapped around a silica cloth. You might want to try taking the CE5 off the battery and sealing the bottom with your finger or thumb while you take a few tokes on it, that might pull the juice up to where it needs to be. Worth a try. Why do you want wickless?

i just tried that and again theres no gurgling and then right after that i attached the battery to it and the gurgling is coming back

 

[bacc.vap]

Is it the same as this-> Bauway CE8 SS Mesh Clearomizer » Video Channel » The Original Electronic Cigarette Social Media Network

 

[RoseB]

Hello I've used the StamCE5 wickless from madvapes and had no problems. You might have a dud. The one I had was alright. It's kind of a pain keeping the coils wet (no wicks). Maybe look into a different type of clearomizer. The Vision ViVi Nova is a good one. If you're using eGos maybe the Kanger EVOD

 

[bacc.vap]

For some reason I completley misread your complaint that it was leaking. I don't know why, I was giving advice as if it was not wicking , sorry about that.
If you took it apart and cleaned it I'd imagine it should be bone dry before you put it back together again, if you did'nt take it apart it probably won't dry very well just airing out and it could still have water in it.

 

[tattedhypebeast]

Is it the same as this-> Bauway CE8 SS Mesh Clearomizer » Video Channel » The Original Electronic Cigarette Social Media Network

It looks exactly like that but the inside looks a little different. If you want i can take a picture of inside the coil?

 

[tattedhypebeast]

Hello I've used the StamCE5 wickless from madvapes and had no problems. You might have a dud. The one I had was alright. It's kind of a pain keeping the coils wet (no wicks). Maybe look into a different type of clearomizer. The Vision ViVi Nova is a good one. If you're using eGos maybe the Kanger EVOD

Just my luck lol thanks man im gonna look into those!

 

[MiniJini13]

I had that problem and then realized when I took off the base the center part (wick) wasn't screwed in tightly. I got frustrated with those pretty quickly, they were more of a hassle to me to keep the wick wet than the cheaper ce4 and I would get a burnt taste. There isn't really wickless that I know of. I think you can draw too hard on them and flood the center? I started getting MT3s instead or EVOD. 1 New Kanger MT3S bcc Red 2 5 Ohm Ego Thread Clear Attched Mouth 2 4 Ml | eBay
I'm pretty new to this myself but that's been my experience.

 

[tattedhypebeast]

I had that problem and then realized when I took off the base the center part (wick) wasn't screwed in tightly. I got frustrated with those pretty quickly, they were more of a hassle to me to keep the wick wet than the cheaper ce4 and I would get a burnt taste. There isn't really wickless that I know of. I think you can draw too hard on them and flood the center? I started getting MT3s instead or EVOD. 1 New Kanger MT3S bcc Red 2 5 Ohm Ego Thread Clear Attched Mouth 2 4 Ml | eBay
I'm pretty new to this myself but that's been my experience.

i was looking into the kangers also and it says their not compatible with 510 threads lol Thanks anyways. i guess ill try to tighten this thing tighter hopefully and maybe it was loose.

But that does make sense taking too big of a hit to make it absorb in the center tho. maybe after it air dries im gonna take less of a big hit

 

[MiniJini13]

You can use anything compatible with ego or 510 threads. The 510 screws into and the ego fits on the outside.

 

[tattedhypebeast]

You can use anything compatible with ego or 510 threads. The 510 screws into and the ego fits on the outside.

ohhh ok i get it now lol thanks everyone for the help again