Chalice is the first repairable bottom feeder atomizer in the world. It is the perfect tool to transform simple liquid into a unique, magical-like vaping experience. There were several version of it, now we took all the best features and combined them ... thats how the new Chalice Retro was born.
Made out of stainless steel, all its parts are 100% designed and produced in-house.
Chalice Retro uses a 510 thread, and will thus fit almost all bottom feeder mods that use a similar 510 thread and it is a MTL atomiser.
Size: 35mm x 14mm ( without 510 connection)
Chalice Retro is composed from three distinct parts:
1. The base contains:
- 510 connection
- removeble feeding bar plated with silver ( if some how the juice floods the interior of the base a 2mm hex key can be used to remove the feeding pipe and allow the base to be washed an cleaned
- the + and - posts are now similar with Chalice 3 versions
- same curved surface under the posts ( for the excess juice to go back into the feeding bottle)
- the wick and coil will not be placed between the post, now the coil will be facing the air hole and you can play with its position the way you like for more vapor, more flavor, TH, etc.
2. The top cap:
- is the cap which screws on top of the base
- it is engraved with the "Chalice " logo
- hole that will provide the air for the coil is 1mm
3. The drip tip
- OD: 9 mm
- height 10 mm
- ID 5 mm
- made from delrin
- it holds two orings
Warranty: 1 year
Made out of stainless steel, all its parts are 100% designed and produced in-house.
Chalice Retro uses a 510 thread, and will thus fit almost all bottom feeder mods that use a similar 510 thread and it is a MTL atomiser.
Size: 35mm x 14mm ( without 510 connection)
Chalice Retro is composed from three distinct parts:
1. The base contains:
- 510 connection
- removeble feeding bar plated with silver ( if some how the juice floods the interior of the base a 2mm hex key can be used to remove the feeding pipe and allow the base to be washed an cleaned
- the + and - posts are now similar with Chalice 3 versions
- same curved surface under the posts ( for the excess juice to go back into the feeding bottle)
- the wick and coil will not be placed between the post, now the coil will be facing the air hole and you can play with its position the way you like for more vapor, more flavor, TH, etc.
2. The top cap:
- is the cap which screws on top of the base
- it is engraved with the "Chalice " logo
- hole that will provide the air for the coil is 1mm
3. The drip tip
- OD: 9 mm
- height 10 mm
- ID 5 mm
- made from delrin
- it holds two orings
Warranty: 1 year
