Cheap 50w Box Mods
- Thread starter foraben
- Start date
- th_trl_thread_readers 0
- Status
Ipv2 and really any rda or a Kay fun will work you'll probably never go over 30-40w
foraben:14480193 said:
Really no point going to 50 watts on factory coils. They really burn above 15-20 watts. High wattage devices are for rebuildables
foraben:14480233 said:
Those are for mechanical mods so you get better wattage with then.
I have 30w cloupor hana clone that I'm happy with. You can find the newest, improved version (nicer than mine) here:
DNA 30 Box Mod by Cloupor
Next, snag a pair of nautilus tanks, either the mini or the standard:
Aspire Nautilus Mini
Aspire Nautilus Tank
The only other thing you'll need to track down in a Sony VTC5 battery and maybe a backup (they often come in pairs) to power it. You can charge the battery in the device.
It's a bit over your budget, but a nice settup. See if you can find a 10%
Hana Modz DNA 30 or the new 40 watt. Vapor Shark DNA 30 is good too. If you're using prebuilt tanks you definitely don't need 50 watts. 30 is probably too much. Those prebuilt tanks aren't meant for high wattage. The coils in them are small gauge wire and they break easily.
If you're just using clearo tanks then just get an istick. Goes to 20 watts and if you're not rebuilding then there's no reason to go over that. Also, it's only 35 or so dollars!
If you're not gonna go with rebuilding, get a Protank 2 and an MVP 2 (or wait cause the V3 is almost out).. You don't need more than MAYBE 10 watts with any stock coil. My dual coil iClear tastes burnt above 9w. My Protank 2 with my own microcoils is tasty and cloudy at 8..
Sent from my SGH-I777 using Tapatalk
Sent from my SGH-I777 using Tapatalk
If you are dying to spend your cash then get the Sigelei 100w. I got the sigelei and a fogger for 125. But you still need batteries and a charger. SO you are looking at more than 120. The nice thing about the sigelei is battery life with 2 18650's i get about 25 hours of hardcore vaping prior to changing my batteries. I mostly drip on a .4 ohm coil.
The istick seems like a good option if you are just using clearo's and if you want to get into rebuilding it will fire a good vape on a rebuildable like the kayfun. I usually run my fogger at 18-20watts depending on juice.
The istick seems like a good option if you are just using clearo's and if you want to get into rebuilding it will fire a good vape on a rebuildable like the kayfun. I usually run my fogger at 18-20watts depending on juice.
iPV2 is probably your best bet but if your using factory coils then there is really no need to go 50w or for that matter even 40w is a bit much.
MVP & Nautilus tanks with the BVC coils. 7.5 - 9W gives good clouds, great flavor. Adjust W up or down depending on the juice. Adjustable airflow adds to flavor & clouds. Remember tho, clouds are one thing, flavor is something else entirely. I go for flavor.
If I do end up getting a box mod I was looking at that eleaf Istick. 15 Watts is more than enough to satisfy me, but the option to use 20w would maybe come in handy. 50w would blow my head off and I smoked palmall 100's for 13 years lol. God Bless.
If you think you will get into rebuilds at some point then I say get the 50w box and use the clearo tanks on it that way you have room to expand into the rebuild rda rba when you are ready, you will already have the device and will not need to spend more money as your interests expand. If you wanted to be in the 30-40w range check out the dna30 and dna40 both those options if you go authentic will bust your budget though. If you do not think you ever will get into rebuilds then you could stay in the 20w range.
I don't understand why there isn't more love for the hana clone! It seems as good or better than any other dna30 out there. I mostly vape mechanicals, but I have a "Cana" and absolutely love it.
- Status
Similar threads
