Cheap 50w Box Mods

Status
Not open for further replies.

MonkeyTokes

Unresolved Status
ECF Veteran
May 12, 2014
95
39
33
Collegeville, PA
Honestly if you're not into rebuilding and all that and you just want more vapor but not on the cloud chasing level, I'd check out the MVP 2. If you're still looking(or the next person who stumbles across this in your shoes) they've just recently released a 20w version as well which honestly is plenty if you wanna bump some stock coils.

I use mine around 8.5-10w and get amazing vapor. I just don't seethe point in dropping $120 on a device more or less designed for the sub ohmer hobbyist and cloud chasers when you could spend much less and get a few months worth of juice or even two devices that would definitely suffice for what you need :p
 

BraveNewWorld

Senior Member
ECF Veteran
Verified Member
Oct 18, 2014
289
267
Pennsylvania
From what I read you want a 50 watt box mod and an aspire Atlantis. I would go with an Hcigar 50 watt just came out this month. And get the aspire Atlantis tank. They aren't just for mechanicals, you need a box over 20 watts to fire a .5 ohm coil in the Atlantis. I just checked this out today and I was impressed. The kanger sub tank offers 1.2ohm factory coils that are prebuilt. So if you want clouds without rebuilding, the Atlantis will be nice at 20 watts and up.
 
So what box mod do you recommend for someone who doesnt want to rebuild and all that but still wants to get better vapor production, right now i have an Ego Twist with a Protank Mini 3

If you are not going to rebuild the 50w is way high for you. You will not need anything above 30w or even 20w.
If you are using coils at around 1,2 to 1,8 you could even go up to 20w. Anything more would just lose the flavor.

So with in mind you could look for an iStick . A very beautiful little device up to 20w.
 
Ipv2 is your best bet with either the aspire Atlantis or kanger sub tank. I own both tanks and the coils run at .5 ohm and you get close to the vape of a drip and if you want to build coils in the future then you have the device to support it. I own the ipv2 and it looks like I used it as a hammer but still works like the day I bought it. Now I'm using the ipv3 and love It and have zero issues. They also have ipv mini which is a 30 watt device that would work fine with the Atlantis or kanger sub tank but the lowest resistance is .5 while the ipv2 is .2 which gives you more room to work with if and when you decide to drip. I stand by pioneer 4 you.
 

Cowboy192

Super Member
ECF Veteran
Verified Member
Nov 2, 2014
513
1,013
Cardiff, uk
cargocollective.com
How much maintenance does an rda require because i have no idea how to build the coils and all that, i was kinda looking for something really simple

Ipv2 and aspire Atlantis, sub ohm plug n play, plenty of flavour, nice clouds too and nice n simple
image.jpg
 

CassiusCloud

Super Member
ECF Veteran
Feb 22, 2014
458
440
U.S.
I'm using the IPV 2S 60w which was about 120.00 in the brick and mortar shop here in town..
You might be able to find it cheaper online.
It's also software upgradable to 70w ,75w and they are saying by the end of the year they may have their 80w update out..

I've used everything that i can fit on it and it works really well..
Atlantis sub ohm,kanger sub ohm,Nautilus mini and the regular Nautilus,my Kayfuns and my drippers..

it'll use 0.2ohm coils up to 3.0 ohm coils... so there is a lot of range there..

I used to carry around 4 different mods with me at all times with batteries..
Now i just carry around this mod and the tanks i want to switch out,plus my batteries..

Love the thing...
For me and what all it offers with upgrading it to higher watts if i choose..it was well worth the money and felt like a good bang for the bucks..
 
Last edited:

Jim Beam

Senior Member
Feb 7, 2015
194
48
Cut And Shoot Texas
Box mod? Sigelei v5 $23 shipped.
It can use 18350 or 18650 10A batteries $15.00 shipped and thats for two panasonic batteries.
Protank clone $7 shipped.
Spair coils can be had for under eighty cent each. One coil last up to two to three weeks
The box mod goes up to 6v or up to 15w and that more than enough to run any tank.
Youll need a charger and juice.
Would suggest getting a protank atomizer with a adjustable air flow.

Jb
 
Last edited:
Status
Not open for further replies.

Users who are viewing this thread