Cheap way to get started!

Status
Not open for further replies.

espkh123

Senior Member
ECF Veteran
Verified Member
Jan 6, 2014
291
179
Bel Air, MD, USA
Hey guys, this marks my 1 month anniversary to quitting smoking!
Instead of buying a nice authentic mod (which I am still going to do... might as well)
I would like to start my own DIY workshop in my room.
Figured since I am 18 and am never in my bedroom and it is spotless - my huge dresser (which sits at waist level) would be a good DIY station since most of my supplies are in my briefcase ^^
Now I want to get started with supplies for cheap.
I am generally against buying a complete "kit" because they mark it it so much for what you get usually.
I check on diyvaporshack and want to evaluate ALL possible options.
I don't really need a case as I can make one.
I plan on building a multi tier wood container that has been drilled to accommodate all type of juice bottles and flavoring extracts.
What do you all suggest I start with?
It seems overwhelming - some of the stuff I see on here are pretty sore on the eyes and I can't follow.

So far I am thinking of these

5 30ml glass bottles
10 10ml plastic refillable bottles
latex gloves.
Flavoring - dont really know where to get it yet though
100mg base nicotine
I want to use 70vg to 30 pg - do I mix it myself? Or do they come pre done. (where to find these raw materials)
.........

Anyone have links or any suggestions to a WELL PUT TOGETHER guide?
Once I get into this I plan on making a huge guide for new people through pdf.
 

Svt54

Full Member
Verified Member
Nov 24, 2013
57
22
Jeffersonville, IN USA
I would go with the 60mg nicotine until you get familiar with the process. It is safer to deal with, and the cost is about the same per ml of finished product. I would start with either ecig express, or wizard labs. EX is a little cheaper on bottles, and WL is cheaper on nic and PG/VG bases.

You will need:
Bottles
Syringes or dropper pipettes (I prefer syringes)
14ga(for VG) and 18ga(for pg/flavor) blunt needles for syringes
flavoring
nicotine base (IN VG if you are wanting over 50% VG in your final product)
VG
PG

If you order all at once from Wizard Labs, orders over 65.00 get free shipping and it's fast. WL carries TFA flavorings, which you can find tons of recipes, and suggested percentages for here...http://www.e-cigarette-forum.com/forum/diy-e-liquid/336110-flavor-apprentice-flavoring-thread.html

I would also recommend picking up a cheap dripper atomizer to test your mixes if you don't have one already.
 

rowdyplace

Super Member
ECF Veteran
Verified Member
Dec 31, 2013
921
693
80
Birmingham, Alabama
<<<snip>>>
I would also recommend picking up a cheap dripper atomizer to test your mixes if you don't have one already.

Just getting into DIY juices. Only used the EgO batteries and Ce4/5 or Kanger T3s attys so far. These take a lot of liquid to function properly. Can you suggest a "cheap dripper atomizer"?
 

dannyv45

ECF DIY E-Liquid Guru
ECF Veteran
Verified Member
Apr 12, 2013
7,739
8,424
New Jersey
www.e-cigarette-forum.com
Hey guys, this marks my 1 month anniversary to quitting smoking!
Instead of buying a nice authentic mod (which I am still going to do... might as well)
I would like to start my own DIY workshop in my room.
Figured since I am 18 and am never in my bedroom and it is spotless - my huge dresser (which sits at waist level) would be a good DIY station since most of my supplies are in my briefcase ^^
Now I want to get started with supplies for cheap.
I am generally against buying a complete "kit" because they mark it it so much for what you get usually.
I check on diyvaporshack and want to evaluate ALL possible options.
I don't really need a case as I can make one.
I plan on building a multi tier wood container that has been drilled to accommodate all type of juice bottles and flavoring extracts.
What do you all suggest I start with?
It seems overwhelming - some of the stuff I see on here are pretty sore on the eyes and I can't follow.

So far I am thinking of these

5 30ml glass bottles
10 10ml plastic refillable bottles
latex gloves.
Flavoring - dont really know where to get it yet though
100mg base nicotine
I want to use 70vg to 30 pg - do I mix it myself? Or do they come pre done. (where to find these raw materials)
.........

Anyone have links or any suggestions to a WELL PUT TOGETHER guide?
Once I get into this I plan on making a huge guide for new people through pdf.

Read my blog on

What you need to know as as far as supplies for the first time juicer


It will explain what you need without going over the top expense wise.

Read my other blogs while your at it. Lots of good information in them.

E-Cigarette Forum - dannyv45 - Blogs

then read hoosier's blogs.

E-Cigarette Forum - Hoosier - Blogs

then read the stickies at the top of the page.

this will explain a lot of the how's and why's.
 
Last edited:

MD_Boater

Super Member
ECF Veteran
Nov 6, 2013
583
1,020
Maryland Chesapeake Bay
Pick up one or two 5ml, 10ml, and 25ml graduated cylinders. I got mine relatively cheap at Amazon. I like using them because it is simple to drop the ingredients directly into them without worrying about measuring with syringes. A word of caution. If you don't get the expensive ones, the measurements may not be the same between different cylinders. 10ml in one may be 9.5ml in another. However, if you mix in a single cylinder this is not a problem as the percentage of each ingredient work out correctly in the final mix.

Edit: Howdy, neighbor. I'm close to Kingsville.
 

SoUnique

Ultra Member
ECF Veteran
Verified Member
Mar 24, 2012
1,083
520
64
Onatrio, Can.
I like RTS Vapes, they have everything you'll need.
Thanks for all the replies guys!
Im hoping to learn all this quickly and be good at it.
What websites have the best and biggest variety of flavoring?
I want to mix different flavors together and not just use 1 per juice. Gotta make my signature juice :)
 
Status
Not open for further replies.

Users who are viewing this thread