Check it!
Smoktech Magneto, RSST, 510 angler, SS drip tip. Bang!
Note: I am aware it's not chrome.
Smoktech Magneto, RSST, 510 angler, SS drip tip. Bang!

Note: I am aware it's not chrome.
I prefer brass over stainless.
I prefer brass over stainless.
I prefer brass over stainless.
Key words, "I prefer." To each his own, with respect, fellow vaper.
@Ryedan, I don't know. I'd do the math, but I'm in bed trolling... this set up is a 3.7V mech vs 0.5ohm coil.
Blehh. Sleepy times.
Key words, "I prefer." To each his own, with respect, fellow vaper.
@Ryedan, I don't know. I'd do the math, but I'm in bed trolling... this set up is a 3.7V mech vs 0.5ohm coil.
Blehh. Sleepy times.
Slap!
You sir are over the amp limit of that 18350!
@Ryedan, I don't know. I'd do the math, but I'm in bed trolling... this set up is a 3.7V mech vs 0.5ohm coil.
I've just moved from 0.6 - 0.7 ohms to 0.5 ohms in a AGA-T to try out. Hot vape with a fresh battery, but I know at 1/16" diameter my air hole is too small. Don't want to open it up unless I'm going to stick to vaping at that power.
I didn't realize until Steam Turbine mentioned it that you may have a 18350 battery in it. Yup, 7.5 amps would be over drawing it, unless there's a 18350 I don't know about. The max continuous output rating I know of is the Efest 18350 800mah at 6.4A and the EH 18350 800 mAh also at 6.4A. I use 18650 MNKE at 20A and Sony at 30A.
The AW 18490 1100mah put out 16.5A. The best I know of in that size.
Vape safe my friend![]()
All this because of a silly misread iTaste SVD.
My RSST is set at 0.6 ohms.
Oops!
Don't worry everyone, false alarm.
nice setup btw....
I really enjoy the magneto
Here's why I don't like your set up:
I don't have that Angler tip, and I want it. Therefore, I'm jealous.![]()
Haha. Looks great, though!![]()
And that air hole is HUGE!
ETA: Found that angled drip tip base for less than $3. Added to list of things to buy!
Check it!
Smoktech Magneto, RSST, 510 angler, SS drip tip. Bang!
![]()
Note: I am aware it's not chrome.