this was originally in the tips n tricks section , but as we now have a modders forum , this would be more at home here.
Right finnaly managed to get around to doing this today. this isn't going to be one of those 'in-depth' how to's but rather a rough guide as it's really a simple little project for all you screwdriver owners.
so to make a little adaptor to use a generic 4072 pen style classic atomizer you will need:
First things first you wanna remove the threaded adators from the atomizer and battery, how you do it is up to you. I ended up peeling the casing off because both where stuck in real tight. you want to keep the wires from the battery and about 15mm of the battery housing.
from the pics you can see what needs to be done ...can't you ?
what you need to do is solder one wire to the centre pole of say the atomizer connector and another wire to the inside of the outer wall of the atomizer connector. once thats done pass the wires through the casing and solder the other ends of the wires to the battery connector in the same configuration.
once done, push the connectors carefully into the housing. I used the help off a 'G' clamp here with 2 wood pieces to protect the threads as they are quite a tight fit.
that's it really , job done..and like the screwdriver itself...it just works
I can obviously also use any 901 battery with the pen atomizer too in an emergency situation. hehe
ApO.
Right finnaly managed to get around to doing this today. this isn't going to be one of those 'in-depth' how to's but rather a rough guide as it's really a simple little project for all you screwdriver owners.
so to make a little adaptor to use a generic 4072 pen style classic atomizer you will need:
- 1 901 atomizer
- 1 RN 4072 classic battery
- solder iron , hacksaw, files etc.
First things first you wanna remove the threaded adators from the atomizer and battery, how you do it is up to you. I ended up peeling the casing off because both where stuck in real tight. you want to keep the wires from the battery and about 15mm of the battery housing.
from the pics you can see what needs to be done ...can't you ?
what you need to do is solder one wire to the centre pole of say the atomizer connector and another wire to the inside of the outer wall of the atomizer connector. once thats done pass the wires through the casing and solder the other ends of the wires to the battery connector in the same configuration.
once done, push the connectors carefully into the housing. I used the help off a 'G' clamp here with 2 wood pieces to protect the threads as they are quite a tight fit.
that's it really , job done..and like the screwdriver itself...it just works
I can obviously also use any 901 battery with the pen atomizer too in an emergency situation. hehe
ApO.
Last edited:
