It does work. The link you showed me on page one is the same thing, I believe his works.
oh they wick all right. I make sure of that when I test the foam in the reservoir with the water. I don't know the science of it, I just know they work. When it doesn't drip, foam's too tight, when it does, it's too loose. I get mine to drop once every five or six seconds then I empty the water, fill the reservoir with e-juice and stick it down the tube and on to the wick. It doesn't even come out when I turn it upside down because the foam pressing against the atty holds it in place. The best part about it is you don't need blue foam or a cap on the end you can leave it wide open. But it it were huge you might need a washer or something. I just looked at the schematics of the 510 cart and looked at your latest cart mod and thought there might be other ways. I want a clear cart that holds more liquid. I tried the straw first, your way wouldn't work with the straws I had. So I tried it straight and it worked with 3 carts. I don't want a 7 inch pencil and I want to see my liquid. I made 4 of these mods so far and they all work. But I don't like that they can't bend so well. I wanted to wrap them around but that isn't going to happen. They always bend and crimp. Getting the foam to keep the liquid from gushing out is a little difficult though. That takes the longest. But once it's in, you never have to take it out. you can just drip right in the mouthpiece when it's empty. It is no different than an e-dobit that stays in the atty. Like a pen. Don't ask me how it works, All I know is that it does. I know it isn't perfect. But it works and you can make it 6 freakin' feet long if you want to. Just make sure the reservoir doesn't gush out and don't fill the reservoir to the brim when you fill it. Make sure there is enough foam sticking out of the tip of the reservoir and when it's saturated, stick it in the atty and your golden. I am liking it very much myself.
oh they wick all right. I make sure of that when I test the foam in the reservoir with the water. I don't know the science of it, I just know they work. When it doesn't drip, foam's too tight, when it does, it's too loose. I get mine to drop once every five or six seconds then I empty the water, fill the reservoir with e-juice and stick it down the tube and on to the wick. It doesn't even come out when I turn it upside down because the foam pressing against the atty holds it in place. The best part about it is you don't need blue foam or a cap on the end you can leave it wide open. But it it were huge you might need a washer or something. I just looked at the schematics of the 510 cart and looked at your latest cart mod and thought there might be other ways. I want a clear cart that holds more liquid. I tried the straw first, your way wouldn't work with the straws I had. So I tried it straight and it worked with 3 carts. I don't want a 7 inch pencil and I want to see my liquid. I made 4 of these mods so far and they all work. But I don't like that they can't bend so well. I wanted to wrap them around but that isn't going to happen. They always bend and crimp. Getting the foam to keep the liquid from gushing out is a little difficult though. That takes the longest. But once it's in, you never have to take it out. you can just drip right in the mouthpiece when it's empty. It is no different than an e-dobit that stays in the atty. Like a pen. Don't ask me how it works, All I know is that it does. I know it isn't perfect. But it works and you can make it 6 freakin' feet long if you want to. Just make sure the reservoir doesn't gush out and don't fill the reservoir to the brim when you fill it. Make sure there is enough foam sticking out of the tip of the reservoir and when it's saturated, stick it in the atty and your golden. I am liking it very much myself.