I 2nd that!!
best custard and pudding I've tried. Bryan and his customer service can't be beat 
[CLOSED]
- Thread starter Bryan lord
- Start date
- th_trl_thread_readers 0
- Status
I 2nd that!!
best custard and pudding I've tried. Bryan and his customer service can't be beat
I'm not a big banana fan either but Bryan recommended I try it
it's really good. Nana is not overpowering at all.
I don't like to go that low myself. I Do enjoy the strawnana mix on a .9 coil at 30 watts though.
Good to know, I have a hana mini clone coming that will need a .7 - .9 build. The quasar has spoiled me to < .5 ohms the flavors are just amazing!
Sent from my HTCONE using Tapatalk
I've got an atlas myself but I have always tried to stay above .5 just because you can only go so low
I should have my hex Monday, I can build a little higher than I do normally and get a higher wattage as well.
Can't wait!
Can't wait!
I just got my refund for the bs mod preorder today. Freeing up a tiny bit in my vape budget. I just ordered an authentic TOBH. Pretty stoked. Removable top cap awesome for dripping. Next paycheck I gotta get me a new kayfun cause I miss mine
A guy from another forum loves his. I just like the screen aspect of the atlas.
Atlas is deff nice, screen, reverse battery protection, upgradable.
Hex is half the price is what I liked lol. Plus it will go above 50 watts. They say up to 12 amps. 10 is recommended though obviously.
Only thing the hex has on it, is dual 18650. That's it lol.
Edit let us know how that tobh is.
When I ordered the atlas I didn't know that the hex was released the way it was. If I had I probably woulda gone that route The only other thing about it that I didn't like was the 510 just sitting up there and the gap between the mod and the atty.
Would you guys recommend the magma by paradigm I wanna order one but I've never had a rda where the airholes aren't on the side.
I have one of the clones. It's an extremely popular atomizer and a lot of people love the flavor it gives off. It's the only atty I'm using right now (til my new tobh gets here) but I don't like the airholes on the bottom. I've been so unlucky with dripping into it. It seems like I always find a way for the juice to get into the airholes. Supposedly the trick is that you drip onto the posts and that channels it down into the wells. For some reason no matter what I do I always wind up with juice running out of the airholes.
For flavor though it's been great for me. I can only compare it to an igo-w, nimbus, kayfun and an rm2 though.
By the way the airholes are directly underneath where the coils sit so the coils are right there next to the posts. The air still comes from the side but it's fed from underneath those coils. The Afc is with a third piece, a ring that is tightened into place by the top cap. It is cool that the top cap is held on there by threads instead of an oring. In order to adjust airflow you have to unscrew the top cap just a smidge and move the ring then tighten it back down while holding the ring. Not really an adjust on the fly thing.
I've also found that it doesn't perform awesome under .7 ohms. Something about the high heat makes it have a harder time wicking. Just my opinion of course.
For flavor though it's been great for me. I can only compare it to an igo-w, nimbus, kayfun and an rm2 though.
By the way the airholes are directly underneath where the coils sit so the coils are right there next to the posts. The air still comes from the side but it's fed from underneath those coils. The Afc is with a third piece, a ring that is tightened into place by the top cap. It is cool that the top cap is held on there by threads instead of an oring. In order to adjust airflow you have to unscrew the top cap just a smidge and move the ring then tighten it back down while holding the ring. Not really an adjust on the fly thing.
I've also found that it doesn't perform awesome under .7 ohms. Something about the high heat makes it have a harder time wicking. Just my opinion of course.
Last edited:
What clone do you have or what company is it from I was looking at a bunch of clones lately there like 1/5th of the price of the originals I keep thinking whats the catch?
The catch with clones are that they're hit or miss. Some of them are exact replicas and other can be crap. Insulators can melt screw can go loose etc...
I have this one: http://101vape.com/rebuildable-atomizers-tanks/309-magma-atomizer-clone-by-infinite.html
No major complaints. I don't have an authentic but other than the stuff I listed previously the only thing I'd say bothers me about this one is that sometimes the screws loosen out of no where. That might be from me dripping my liquid directly on it but I don't know. Just every now and again I'll notice that the ohms have gone up a little so I have to take the top cap off and screw down the posts.
Some people hate people buying clones. I personally hate the idea of them all together but sometimes I just want a new atty and don't have the room in my budget for it. Fear either owns or has owned just about every atomizer on the market so I pretty much just listen to what he's said about which ones are good and which ones are bad. There's a lot of info on this and another forum I use about these things.
I've had this clone down in the .5ish range and can't complain about it except that wicking suffered.
I can see why people don't like clones I don't mind them I couldn't see me myself spending 200-300$ on a mech mod when it's just a tube that you stick a battery in but most rda are pretty detailed I think the only thing that's kinda lame about clones IMO is that they're stealing other peoples ideas like even how they take there branding and stuff my friend owns a nemesis clone it's pretty good I think, never tried the original though so I can't compare it.
My nemesis is a clone as well. For the price I can't complain. The atty clones make me nervous as there's a lot going on in there. Batteries as well. I try my hardest to only buy the legit batteries. Fact of the matter is that some of this stuff can be dangerous. From my understanding as long as were not pushing the edge of the envelope it can be safer with research. I don't like to be the first person to buy any piece of gear and I refuse to do so with a clone
I didn't even know they cloned battery's I only buy Sony vtc5's for now and yeah there's a lot of people doing crazy things with there builds like it's become a thing who can build the lowest or blow the most clouds I seen someone with a .05 ohm build on YouTube chain vaping I don't get how these people aren't in the hospital yet I don't have anything against sub ohming I sub ohm on mech mods cause that's the only way they work well for me and with this wire I've been using it's pretty much impossible to not sub ohm because it's half the resistance of kanthal.
Like a boss! Love it, clean, as well as the internals. Can vape for quite a while with dual batteries. Easy to adjust as well.
Only problem is I need to find a build I like lol. I'm running a .6 ohm 24ga 7/8 wrap macro full tilt lol.
Also got me a drip tip that looks great and works well for me.
- Status
Similar threads
- Locked
