CLOSERS MOD BF doesn't work

[SRZ.enzo]

Hello !
I received a new box and few other things today, but the squonker I bought doesn't work.
It's a SERISVAPE Closers BF box kit. This box mod is a low priced mechanical squonker. It worked before, the last owner vaped it, but I tried and nothing happens.

What can I do to make it work ?

Have a nice Day, and thank you for your help !

 

[zoiDman]

The 1st thing I would do is to make sure the Build in your rba is working. Retighten all the Post Screw etc. Do you have another (or a Friend's) Mod you could put rba on an see if it works there?

You also should Check that the Center Pin of your RBA sticks out farther then the 510 Threaded Part. A gap between the RBA and the Mod is usually not a Problem. Although it can look a little funky. Once everything is back up and running you can work on putting a shim between your RBA and the Mod.

You should then make sure the Contacts on you Mech all look shiny and are making contact when you push the Fire Button. And do a check to make sure nothing is loose around the 510 plate.

If none of this works, do you know someone who uses Mech Mods you could show it to? Or maybe a Vape Shop near you?

 

[SRZ.enzo]

The 1st thing I would do is to make sure the Build in your RBA is working. Retighten all the Post Screw etc. Do you have another (or a Friend's) Mod you could put RBA on an see if it works there?

You also should Check that the Center Pin of your RBA sticks out farther then the 510 Threaded Part.

Thank you !
It does work now but it's weak even with a Sony VTC6 with dual 26Ga Ni80 build at 0.3

 

[Izan]

Thank you !
It does work now but it's weak even with a Sony VTC6 with dual 26Ga Ni80 build at 0.3

How many total wraps are you asking that poor vtc6 to power?
Have you measured voltage drop for that device/ build?


cheers
I

 

[SRZ.enzo]

How many total wraps are you asking that poor vtc6 to power?
Have you measured voltage drop for that device/ build?

It was a 6 spires 26Ga double coil build. I have no possibility to measure the output voltage unfortunatly but it works very well now!
The BF Box hardware was totaly loose so I tighened it and it vapes very well hahaha

Have a nice day x