Coil Help

[jaster725]

I got into dripping a few months ago and i build the same setup now as when i first learned which is a .4 ohm dual coil setup. I want to rasie my ohms up to .7-.8 and i cant find any advice on what gauge wire, how big the wraps should be and how many wraps. Can anyone on here point me in the right direction? Thanks

 

[AlB53]

do the same build just add a wrap or two,should bring your ohms up..

 

[jaxgator]

I got into dripping a few months ago and i build the same setup now as when i first learned which is a .4 ohm dual coil setup. I want to rasie my ohms up to .7-.8 and i cant find any advice on what gauge wire, how big the wraps should be and how many wraps. Can anyone on here point me in the right direction? Thanks

If you're at .4 and want to go to .8, double the wraps on each coil. That should get you pretty close.

 

[maxd]

If you're at .4 and want to go to .8, double the wraps on each coil. That should get you pretty close.

easy to do

 

[Added]

[Dual Coil]
.7 Ohms using 28ga Wrapped around 1.4mm dowel 2 x 10 wraps each
.7 Ohms using 28ga Wrapped around 2mm dowel 2 x 8 wraps each
.7 Ohms using 28ga Wrapped around 2.4mm dowel 2 x 7 wraps each

.7 Ohms using 26ga Wrapped around 2mm dowel 2 x 12 wraps each
.7 Ohms using 26ga Wrapped around 3mm dowel 2 x 9 wraps each

IMO The best bet would be 28ga for your task. Also google " Vapers Toolbox " for an Android based app. and remember to use a meter .

Edit: https://play.google.com/store/apps/details?id=com.valsoft.vaperstoolbox&hl=en

 

[Susan~S]

Here are a few links for you regarding building coils and getting the resistance just where you want it:

1. Steam Engine
2. Coil Toy Calculator

The Steam Engine is much more than just a coil calculator. I consider it my "All in One" vaping calculator.[/QUOTE]

 

[jaster725]

Thanks everyone!

 

[Added]

Thanks everyone!

*Wink [no homo]