Coil master 521 mini tab problem

[Vaper12345678]

So I am new to building coils and recently bought a coil master v3 DIY kit.I love it so much its sleek and easy to use but the tab isn’t really workin I can use it as an ohm meter but when it comes to dry burning it doesn’t do the job. I want to pulse my coils to tweak them but I can’t.You can find the photos (the vidoe is to big to upload) of the struggle below.Please help!

I can take specific photos if that will help

 

[Eskie]

You have a low battery so it can't fire those coils. I have no idea what battery you have in there. Are you sure it's charged? If you plan to dry burn on that you'll need charged batteries preferably rated 20A CDR to fire the coil. Do you have other batteries around like real Samsung, LG, or Sony? What batteries do you use in your mod?

 

[Vaper12345678]

You have a low battery so it can't fire those coils. I have no idea what battery you have in there. Are you sure it's charged? If you plan to dry burn on that you'll need charged batteries preferably rated 20A CDR to fire the coil. Do you have other batteries around like real Samsung, LG, or Sony? What batteries do you use in your mod?

I use single sony (18650 I think) in my mod but I will try to charge the tab battery thanks for the advice

 

[Topwater Elvis]

You might have missed the point, you should be using an authentic quality cell inside your mini tab.
At least the same CDR as what would be used in your power device/mod.

Which cells you use is important.

 

[tailland]

That's not a bug, that's a safety feature.

It says lo because your fake battery (real capacity probably between 350 and 680 mah) can't deliver what heating up the coil with that voltage would otherwise take. The 521 mini tab demands a real strong battery, just like your mod, because it does the same thing when you press the fire button.

 

[puffon]

If that 2.13v is the voltage of your battery, it has been damaged, and should be recycled.
The Tab also has a too low ohms limit.
Specs are on the Coil master web site.
That battery looks like the ones Walmart sells for landscape lighting.

 

[Walee]

I have the same problem with mine. I can use a fresh Sony VTC5A and within a few pulses the meter is reading low. A mini tab also did this for me. Not a big deal as far as I'm concerned. I use the metering function and if a need to pulse a coil, I use a mod. Maybe some units work find, I have no idea.

 

[Eskie]

I use a 25R, and dry burn large mass low ohm builds. When I see the voltage drop to ~3V, I recharge it in a dedicated charger. I'm also using the 521 tab full size but the same applies to the mini.

 

[stols001]

Yup. Not enough battery.

Anna

 

[Budgie]

I have the same problem with mine, so I just use it purely as an ohm meter, dry firing etc is done on a Mod.