Condensation

[Tivaliman]

hey guys, wassup!
Is it normal that I'm getting a lot of vapours condensing on my mouthpiece? I don't mind taking it off and giving it a wipe, it's just that the chimney inside the tank is getting it too. Not easy to clean when your all juiced up ready to go!
It is a starter, but still. Is it normal for mods too?

 

[Scy123]

Some of mines do, some of mines don't.

 

[Tivaliman]

Some of mines do, some of mines don't.

Fair enough. Blaaah!

 

[evan le'garde]

In my experience the longer the tip the more condensation occurs. I got a few 6 and 7 cm long drip tips which i don't use anymore for that reason.

 

[Tivaliman]

In my experience the longer the tip the more condensation occurs. I got a few 6 and 7 cm long drip tips which i don't use anymore for that reason.

It spits into my mouth and ruins the taste, then there's inuendo! Lmao

 

[evan le'garde]

It spits into my mouth and ruins the taste, then there's inuendo! Lmao

Oh you're getting it spitting at you. Well i don't know what to tell you. Some do and some don't as sci123 said. I thought you were referring to actual condensation. I bought a few very long drip tips so i could vape with more watts and not feel the heat. Just wound up getting drops of condensation gathering in them all the time so stopped using them. I'm not sure if there is a solution to your problem except to place a piece of ss mesh at the bottom of it.

 

[Scy123]

I think what you are getting is spit back rather then condensation.

 

[Tivaliman]

Oh you're getting it spitting at you. Well i don't know what to tell you. Some do and some don't as sci123 said. I thought you were referring to actual condensation. I bought a few very long drip tips so i could vape with more watts and not feel the heat. Just wound up getting drops of condensation gathering in them all the time so stopped using them. I'm not sure if there is a solution to your problem except to place a piece of ss mesh at the bottom of it.

Your right there is condensation, it sometimes spits up, especially when I want a deep Vape and am unaware there it condensed. I always am careful, it's the times when I'm in a zone, brah!

 

[evan le'garde]

Your right there is condensation, it sometimes spits up, especially when I want a deep Vape and am unaware there it condensed. I always am careful, it's the times when I'm in a zone, brah!

Actually you might actually be talking about a leak. I mean if i don't wick my RTA's properly i'll be sucking juice all day long. Do you get juice in your mouth everytime you take a draw ?.

 

[Tivaliman]

Actually you might actually be talking about a leak. I mean if i don't wick my RTA's properly i'll be sucking juice all day long. Do you get juice in your mouth everytime you take a draw ?.

Once every ten vapes. It's an e-lectron from tecc, a very slim e-cigarette with wattage control. It's ok , I am getting the hang of it now. Straight to lung draws, I feel it's better that way . I can't wait to upgrade to rda's

 

[Tivaliman]

Actually you might actually be talking about a leak. I mean if i don't wick my RTA's properly i'll be sucking juice all day long. Do you get juice in your mouth everytime you take a draw ?.

What rta you got, I m looking at the Tfv4 regular size to start with

 

[evan le'garde]

Once every ten vapes. It's an e-lectron from tecc, a very slim e-cigarette with wattage control. It's ok , I am getting the hang of it now. Straight to lung draws, I feel it's better that way . I can't wait to upgrade to rda's

Direct lung !.

If your drawing like it's a asthema inhaler then you are sucking the juice out and it isn't condensation.

Just like my RTA's. I draw like an asthema inhaler and if it isn't wicked right i get juice in my mouth. Sounds to me that yours just does that anyway. I don't know if your device is designed for direct lung. Maybe not. And if not then i guess your problem has no solution.

 

[Tivaliman]

Direct lung !.

If your drawing like it's a asthema inhaler then you are sucking the juice out and it isn't condensation.

Just like my RTA's. I draw like an asthema inhaler and if it isn't wicked right i get juice in my mouth. Sounds to me that yours just does that anyway. I don't know if your device is designed for direct lung. Maybe not. And if not then i guess your problem has no solution.

Lmao... yeah!! Haha

 

[evan le'garde]

What rta you got, I m looking at the Tfv4 regular size to start with

Erm, using my Zephyrus, quad coil 0.15 ohm. Particular attention needs to be paid to wicking this pocket rocket. Have others. Also using my Kayfun V4 on my Provari, Mouth to lung.

 

[Tivaliman]

Erm, using my Zephyrus, quad coil 0.15 ohm. Particular attention needs to be paid to wicking this pocket rocket. Have others. Also using my Kayfun V4 on my Provari, Mouth to lung.

Kayfun? Man, this name comes up every time. I need to look it up

 

[evan le'garde]

Kayfun? Man, this name comes up every time. I need to look it up

Great, over engineered, very expensive mouth to lung RTA. Very, very well built tank. Got a 32awg, 5 wrap, 1mm id coil ohm'ing in at 1.7, vaping at 3.7v. Just for tooting mouth to lung.

 

[Tivaliman]

Great, over engineered, very expensive mouth to lung RTA. Very, very well built tank. Got a 32awg, 5 wrap, 1mm id coil ohm'ing in at 1.7, vaping at 3.7v. Just for tooting mouth to lung.

I'm watching a review of it by grimmgreen. He's showing how to build and wick it , looks promising!

 

[evan le'garde]

I'm watching a review of it by grimmgreen. He's showing how to build and wick it , looks promising!

You could get an authentic, but they aren't cheap. A knock off is dirt cheap but you'll have problems with a kayfun clone from what i've heard.

Easy to coil and wick. Nice small coil for this RTA. Large coils prevent airflow so i go for something small like 1mm id. Not designed for large clouds the Kayfun V4 is for tooting mouth to lung, low power higher ohm's. You could put a thicker wire in and go low with much more power if you wanted but it won't produce any more vapour because it lacks the airflow needed for large clouds.

 

[Tivaliman]

You could get an authentic, but they aren't cheap. A knock off is dirt cheap but you'll have problems with a kayfun clone from what i've heard.

Easy to coil and wick. Nice small coil for this RTA. Large coils prevent airflow so i go for something small like 1mm id. Not designed for large clouds the Kayfun V4 is for tooting mouth to lung, low power higher ohm's. You could put a thicker wire in and go low with much more power if you wanted but it won't produce any more vapour because it lacks the airflow needed for large clouds.

Yeah I like this, easy enough for beginners to build. I found one at £119.95 (uk) it is quite expensive. Grimmgreen said it is made for flavour. There's a kayfun kit available for £10, that increases the airflow if you want to vape hotter at cremedevape.com

 

[Tivaliman]

Yeah I like this, easy enough for beginners to build. I found one at £119.95 (uk) it is quite expensive. Grimmgreen said it is made for flavour. There's a kayfun kit available for £10, that increases the airflow if you want to vape hotter at cremedevape.com

Pure luxury