Confused Newbie Looking for a Cartomizer to go in my Phiniac Tank.

[caligirlangel]

I was using the eRoll and yesterday upgraded to the Ego-C Twist as a birthday present to myself. I bought a Phiniac XL Skinny Phinny tank but am a bit confused what type of Cartomizer (or is it called Clearomizer?) that I would need to put in it. If anyone can recommend a Cartomizer and possibly even a online store that sells them I would appreciate it!

 

[Myrany]

I am not super familiar with the phiniacs though they are nice looking tanks. If you can point us in the direction of what SIZE tank you got we might be able to help better. There are a couple of different lengths of cartos and which you need depends on the length of the tank.

 

[caligirlangel]

I am not super familiar with the phiniacs though they are nice looking tanks. If you can point us in the direction of what SIZE tank you got we might be able to help better. There are a couple of different lengths of cartos and which you need depends on the length of the tank.

Okay so I just looked up the size on their site and this is what they say:

XL Skinny Phinny Specs (With Caps)
Height 44.5mm
OD 17mm
Wall 1.6mm
Capacity* 2.0ml
*Capacity does not inclued the additional juice that the cartomizer is capable of holding.

 

[Myrany]

ok unless I am very wrong you need to be sure to get the XL cartos they are extra long. Also you will either need to buy prepunched cartos or punch holes in the unpunched ones yourself.

The best deals on Cartos I have found so far are here - Multi-Pack Deals

I have had good luck with the Boge F16 cartos in my tanks that need XL. They are prepunched and so far working well.

 

[eratikmind]

I was using the eRoll and yesterday upgraded to the Ego-C Twist as a birthday present to myself. I bought a Phiniac XL Skinny Phinny tank but am a bit confused what type of Cartomizer (or is it called Clearomizer?) that I would need to put in it. If anyone can recommend a Cartomizer and possibly even a online store that sells them I would appreciate it!

Congrats, caligirlangel, on selecting a very fine tank. I have 2 Phiniac Frosties. Yours will serve you well.

Since you purchased an excellent tank, I can only assume you would like one of the better, if not best, cartomizers. If so, I hold high praise for ikenvape cartos. In your case, either the IKV 510 Mega Fusions or the 510 Mega Platinum pre-punched cartos will be great.

Punch! Cartos & Tanks

These are the best cartos I have tried to date, as compared to the Boge and Smok cartomizers for use in tanks.

Enjoy your new tank!

- Andy

 

[Baditude]

The following cartomizer brands can be used in your XL Phiniac:

Boge XL.
Smoktech tank replacement cartomizers.
Ikenvape mega



You will be given an option to choose what ohm or resistance cartomizer you want. Since an eGo Twist usually uses a voltage range of between 3.4v to 5.0 volts, a 3 ohm cartomizer would work best.



Unless you want to go through the trouble of punching your own juice holes in the cartomizer, you will need to get the "pre-punched" variety which have laser-drilled holes ready to prime with juice and install into your Skinny Phinny. Below is a large list of online vendors that sell pre-punched, single-coil cartomizers with the above brands.

http://www.e-cigarette-forum.com/forum/blogs/baditude/3295-2-sample-list-vendors-selling-pre-punched-single-coil-cartomizers-cartotanks.html


For your convenience, I've made a cartotank setup tutorial for beginners: http://www.e-cigarette-forum.com/forum/blogs/baditude/3710-5-cartomizer-tank-setup.html

 

[sonicdsl]

Moved to Tanks from New Members