Confused on PG/VG for Flavor in EJuiceMeUp

[chrisf8657]

Some of TPA's flavors are in a PG or VG, or both, base. But, they do not tell you the percentage.
Further to that, What, if anything, should I enter in eJuiceMeUp in the Flavor column for PG/VG, or just check 0% for these?

A little confused on this one.

Thanks!

 

[dannyv45]

The flavors are either in 100% PG or 100% VG and treated as such. So if there in VG put a 0 in PG and change the 0 under VG to 100. If it's in PG leave VG at 0 and put 100 under PG. If the flavor is in alcohol then just press the "Flavor zero PG/VG" check box next to the flavor.

As far as flavors coming in (or both, base) 50/50 I've never seen that.

 

[Boletus]

I usually just assume they are in PG, unless stated otherwise on the vendor's website or the container label. But I am not too concerned about 10% one way or the other for the PG/VG ratios, since the only source of PG in my mixes is from the flavorings.

 

[chrisf8657]

Yeah that's what I wonder… they come in a base consisting of both ethyl alcohol and PG. So I'm confused as to what to enter or just check 0%…

Sent from my Galaxy S4 on Verizon using Tapatalk

 

[dannyv45]

Yeah that's what I wonder… they come in a base consisting of both ethyl alcohol and PG. So I'm confused as to what to enter or just check 0%…

Sent from my Galaxy S4 on Verizon using Tapatalk

If it's in alcholo check the "Flavor zero PG/VG" check box. If it's PG leave the box unchecked. Not much more simple then that.

 

[chrisf8657]

Well its BOTH, not either/or.
I'll just leave it checked for 0%.

Sent from my Galaxy S4 on Verizon using Tapatalk

 

[dannyv45]

Well its BOTH, not either/or.
I'll just leave it checked for 0%.

Sent from my Galaxy S4 on Verizon using Tapatalk

Then you need to find out what the percentage of PG to alcohol is and enter that in the PG percentage. So for example if there is 50% PG and 50% alcohol then you need to enter 50%.