Coppervape BF Mod

[junquedujour]

can't remember if i posted about the hastur clone here or not, but i have grown quite fond of it. i am a single coil vaper, ~1.0 ohm. it is very easy to build.
this link is the only version of this one that comes with the bf pin.
$8.88 Free Shipping Hastur V2 Styled RDA Rebuildable Dripping Atomizer (V2, 316 SS, Black) at m.FastTech.com

 

[benley73]

I am waiting on a clone of the Snapdragon 1.5 , many requests into FT for that and the only other one i am interested in is the No Pity No toy clone but not available yet.

The Origen little is the one that i have coming currently , just way too many exceptional reviews on that one & nearly impossible to find a negative.

6.99 usd clone is this the one your wanting

Sent from my ONEPLUS A3003 using Tapatalk

 

[benley73]

Sent from my ONEPLUS A3003 using Tapatalk

 

[herb]

Sent from my ONEPLUS A3003 using Tapatalk

No, i don't want that one , i thought i did but i am waiting on the No Name No Toy now . If you build dual coils the No Name No Pity gets the best reviews i have ever seen for any atty.

 

[herb]

Yeah... $170 (or even $115) is sorta out of my Price Range.

It's not just "sorta" out of my price range , it's way out of my price range . I drop stuff constantly , no matter how careful i am i will do something to ruin it.

 

[MadVLN]

just got my Origen 16 clone today. looks great with JMK tips machi ring. i just saw that focal has the O-16 with beauty ring now for extra $2. that sucks cause i paid 10 times that just last week. lol. oh well.

 

[VladK16]

can't remember if i posted about the hastur clone here or not, but i have grown quite fond of it. i am a single coil vaper, ~1.0 ohm. it is very easy to build.
this link is the only version of this one that comes with the bf pin.
$8.88 Free Shipping Hastur V2 Styled RDA Rebuildable Dripping Atomizer (V2, 316 SS, Black) at m.FastTech.com

Also, the FT Derringer V3 clone top caps and inner sleeves (although I think all versions of the FT Derringer clones do) fit on that Hastur base. I have both the Derringer V3 and this Hastur V2 and confirm that they do. You can buy the Derringer top cap and sleeve separately at FT too.

$2.75 Replacement Stainless Steel Top Cap for Derringer RDA Atomizer - black at FastTech - Worldwide Free Shipping
$1.52 Replacement Inner Sleeve for Derringer RDA Atomizer - stainless steel at FastTech - Worldwide Free Shipping

 

[Train2]

I can't believe there IS a clone of the Hastur!! It was always pretty cheap...now it's cheaper.
Here's the authentic, which comes with a BF pin, for under $14....

can't remember if i posted about the hastur clone here or not, but i have grown quite fond of it. i am a single coil vaper, ~1.0 ohm. it is very easy to build.
this link is the only version of this one that comes with the bf pin.
$8.88 Free Shipping Hastur V2 Styled RDA Rebuildable Dripping Atomizer (V2, 316 SS, Black) at m.FastTech.com

 

[LarryPer]

take a look at the velocity mini by Tobago,,u can use a single coil and its tame lke the rm2

 

[TheWestPole]

can't remember if i posted about the hastur clone here or not, but i have grown quite fond of it. i am a single coil vaper, ~1.0 ohm. it is very easy to build.
this link is the only version of this one that comes with the bf pin.
$8.88 Free Shipping Hastur V2 Styled RDA Rebuildable Dripping Atomizer (V2, 316 SS, Black) at m.FastTech.com

I can't believe there IS a clone of the Hastur!! It was always pretty cheap...now it's cheaper.
Here's the authentic, which comes with a BF pin, for under $14....

I've had the Hastur v2 for awhile. Came from Efun.top. It's well made; no complaints there. I tried a few singles coil builds on it, though was never too satisfied with the flavor intensity. Top/indirect air was clearly the reason. Dual coil give me much better flavor but was a more aggressive vape than I wanted from it.

The compromise was a single split vertical ~.5 ohm. Flavor was a good bit better than a conventional single, and the vape was much less aggressive than the dual, with absolutely no spitting at all due to the vertical orientation. Below is the Hastur V2 split single build on a Kanger Dripbox.

 

[Blind Owl]

Thanks, everyone. After looking over all the recommendations, I've sprung for 2 each NarDa, NoPity, and Derringer, for about $10 more than one RM2. With any luck I should have them all by Xmas.

Now it's off to Fat Daddy's to get some bits & pieces, including squonk pins. Wahoo!

 

[benley73]

Thanks, everyone. After looking over all the recommendations, I've sprung for 2 each NarDa, NoPity, and Derringer, for about $10 more than one RM2. With any luck I should have them all by Xmas.

Now it's off to Fat Daddy's to get some bits & pieces, including squonk pins. Wahoo!

Im going to be Ordering some of the sqounker pins for mod makers fat daddy ones i thinks too ,

Sent from my ONEPLUS A3003 using Tapatalk

 

[benley73]

Still be awaiting my fast tech order placed at the start of October , but i bought a second one on Gearbest full kit for 22.£ on the 11th oct shipped on the 12 October an arrived in the UK at my door on the 19th Oct so 7 days which is pretty dam quick for free delivery option hence why i use Gearbest more than other sites , was cheaper than fasttech too , for the full kit

Very nice small compact size , could possibly replace my pocket mod setup for when im out an about , if works as well as im hoping i might even order Another later on , now i got to get some 4v builds made up , [emoji106][emoji106][emoji106]

Sent from my ONEPLUS A3003 using Tapatalk

Seems to fit 25mm Aromamizer V RDA too , so even happier So my Wolfpaw RDA bottom feeder will also fit great to no over hang [emoji106][emoji16]

 

[ThaFuzz]

Its probably in here already, but im feeling lazy today (3hrs sleep) anybody got side by side pics of a dripbox (v1, single 18650) &a coppervape bf?

 

[TheWestPole]

Also, the FT Derringer V3 clone top caps and inner sleeves (although I think all versions of the FT Derringer clones do) fit on that Hastur base. I have both the Derringer V3 and this Hastur V2 and confirm that they do. You can buy the Derringer top cap and sleeve separately at FT too.

Thanks for this tip. I have both and will try it. I like the Hastur V2 deck. But suspect the more direct side air from Derringer will improve the flavor.

 

[herb]

Still be awaiting my fast tech order placed at the start of October , but i bought a second one on Gearbest full kit for 22.£ on the 11th oct shipped on the 12 October an arrived in the UK at my door on the 19th Oct so 7 days which is pretty dam quick for free delivery option hence why i use Gearbest more than other sites , was cheaper than fasttech too , for the full kit

Very nice small compact size , could possibly replace my pocket mod setup for when im out an about , if works as well as im hoping i might even order Another later on , now i got to get some 4v builds made up , [emoji106][emoji106][emoji106]

Sent from my ONEPLUS A3003 using Tapatalk

Seems to fit 25mm Aromamizer V RDA too , so even happier So my Wolfpaw RDA bottom feeder will also fit great to no over hang [emoji106][emoji16]

Thats looks sweet as hell , congrats .

 

[herb]

Thanks, everyone. After looking over all the recommendations, I've sprung for 2 each NarDa, NoPity, and Derringer, for about $10 more than one RM2. With any luck I should have them all by Xmas.

Now it's off to Fat Daddy's to get some bits & pieces, including squonk pins. Wahoo!

Oh, the No Pity is a stunner , the only thing you are missing is the Origen little .

 

[herb]

just got my Origen 16 clone today. looks great with JMK tips machi ring. i just saw that focal has the O-16 with beauty ring now for extra $2. that sucks cause i paid 10 times that just last week. lol. oh well.

So how is that Origen little , as good as advertised?

 

[socalsailor]

Got mine in today, running a dual 6 wrap 26g build in the stock rda. It isn't the most impressive dripper I've used, but the mod works great. Waiting on a snapdragon clone now from 3fvape, and hopefully can snag a bf pin for it somewhere (anyone know offhand where to get one?) or may try drilling the included pin myself...

Sent from my SM-G928T using Tapatalk

 

[Blind Owl]

Oh, the No Pity is a stunner , the only thing you are missing is the Origen little .

I did give it a long hard look, thanks, it was the diameter that made me pass on it, at least for now. My hands aren't nearly as steady as they were when I was, say fifty-five, and I once dropped my REO on concrete and bent the attached RM2's connector post. Managed to straighten it somewhat, but it made me think that the shorter and squatter the atty—especially on a beefy mod built to withstand abuse—the better. And the more jitter room I have to build on it, the better. Trimming the wick on an RM2 is something of a challenge and won't get any easier.

Same goes for anything with glass parts. Back when I was still using tanks, I sprang for a genuine Russian91% and sure as sh*t…