Just got a new Kanger protank 3 dual coil at hekvapor for my e cig but now when I take a puf on my e cigarette it makes this popping cracking sound and its very hot too what can I do about that?
crackling sound
- Thread starter rosebyhand
- Start date
- th_trl_thread_readers 0
-
- Tags
- e-cigs tank crackers
- Status
Do you have a variable voltage (VV) battery and does the vape taste burnt (noticeably bad taste), or just hot?
If it's not burning it shouldn't be an issue. There might be a bit too much liquid on the coil, but if it's not burning or getting in your mouth there shouldn't be an issue. I get that sometimes with my Halo Triton tank. I wouldn't worry about it unless it becomes an issue (burnt taste, particles in mouth). If that does happen, it could be an amount getting to your coil issue or a heat issue. In the first case, use more on your wick so it allows less into the coil area (more mm of wick), or VV down a bit. If it's just too hot tasting for you, you need to increase the resistance on your coil or down the voltage on your VV a bit.
It's normal for atomizers to occasionally crackle a little. But as you mentioned the vapour is too warm. Your previous posts say you are running an iTaste 134, so I would suggest turning down the wattage a little to see if that cools things down.
Heh. I did a 1 ohm twisted coil in my KFL, and it sounded like Chinese New Year when you fired it! Some crackling is normal though, almost desirable. If you find it to be burnt or spitting juice, lower you voltage a bit like the others said.
Thanks so much ,turning down the wattage is cooler much. Now I can keep vaping now.
- Status
Similar threads
