Crazy Idea? Electronic Fuel Inection

[ltrainer]

I don't know if this has been posted before but here's a thought thats been running through my head for a few weeks now.

I am wondering if there is an electronic fuel injection PV made. I'm thinking it would operate very similar to the fuel injection on automobiles. The e-juice would be sprayed into cylinder (resevoir) then it would get hit with a vaporizer. This juice would be injected as a mist so vaporization would be efficient..I think.

The amount of juice could be variable and it seems as though this kind of setup would be more efficent utilizing the juice and I think the hits off it would be very consistent for throat hit and vapor.

Many box mods are out there now so I think the size of this devise might not be a problem for many vapors. Microcircuits and electronics I think might have the capacity to be scaled to accomodate such a PV.

Perhaps this is the next step in the evolution of vaping if it hasn't been done already. I know I would be willing to spend some cash if this type of devise were made and worked reliably. One might not need to replace attys if the firing device were made well.

Anyway, ignorance is bliss. I know nothing of any of this type of stuff and perhaps this can't be done...just some musings on my part.

I know there are probably many obstacles to making such a devise but it seems to me that it is entirely within the realm of possiblities and that it could be at an affordable price...under $200?

What do you think? Thoughts are appreciated.

 

[Lisa B]

I don't know anything about modding but it sounds like a good idea, I think you should post your idea in the modders forum and see if anyone would be interested in giving it a try.

 

[asti]

Might want to post this in the veterans and mods sections...

 

[champions]

Before reading this I thought you meant a gas powered pv. lol Like how there are electric and gas powered weed wackers.

Maybe I have just inspired a mod.

And to stay on topic I think it's a good idea, but would probably drop battery life. Right now the squeeze boxes are kind of a manual powered "fuel" injection.

 

[floridamale]

There were a few modders that were working on a micro feed pump that was run off the battery. I would equate e-liquid closer to diesel in viscosity then gasoline. Also to provide a decent spray pattern takes lots of pressure most modern FI systems work off high pressure that vaporize fuel before it enters the cylinder and require regulators to achieve that. Then you would need high pressure lines and juice tank to hold that pressure. Not to say that one day small enough equipment won’t be available I just don't think it’s something that would be doable in the size of a e-cig.
It would be nice to see someone come out with a juice feeder, top or bottom that would have a spray nozzle with a pattern that could be adjusted rather than the drip method we have now.

 

[B-Rad_The_Mad_Vapr]

I don't know if this has been posted before but here's a thought thats been running through my head for a few weeks now.

I am wondering if there is an electronic fuel injection PV made. I'm thinking it would operate very similar to the fuel injection on automobiles. The e-juice would be sprayed into cylinder (resevoir) then it would get hit with a vaporizer. This juice would be injected as a mist so vaporization would be efficient..I think.

The amount of juice could be variable and it seems as though this kind of setup would be more efficent utilizing the juice and I think the hits off it would be very consistent for throat hit and vapor.

Many box mods are out there now so I think the size of this devise might not be a problem for many vapors. Microcircuits and electronics I think might have the capacity to be scaled to accomodate such a PV.

Perhaps this is the next step in the evolution of vaping if it hasn't been done already. I know I would be willing to spend some cash if this type of devise were made and worked reliably. One might not need to replace attys if the firing device were made well.

Anyway, ignorance is bliss. I know nothing of any of this type of stuff and perhaps this can't be done...just some musings on my part.

I know there are probably many obstacles to making such a devise but it seems to me that it is entirely within the realm of possiblities and that it could be at an affordable price...under $200?

What do you think? Thoughts are appreciated.

I have a GGTS(GG telescopic storm) with AVS tank(automatic vaping system) accessory attatched. The AVS is basically a 6ml juice reservoir which the atty sits in and draws from. The system works awesome and lasts all day, but be prepared to shell out a good buck for the set up (about $160.00 for the mod and another $75.00 for the AVS). I absolutely love it best investment I've made in a mod. You can search GGTS & AVS on youtube and see some video reviews on them. =)

 

[Papa Lazarou]

How about utilising something like piezoelectric inkjet technology to spray liquid at a heating coil? Could that work?

 

[floridamale]

I would think you could set up a system like the Super T top feeder then have a primer button, like on a weed whacker or chain saw that would inject a ammonized spray over a coil to provide vapor. The system would only need a button, a spring, and a diaphragm, to provide pressure and draw liquid from a bottle or small tank into a holding chamber. As this would be a manual system there would be no draws placed on the battery and it would not need high pressure just the amount created by pushing the button. There could also be a nozzle added to a bottom feed unit above the coil to create a spray instead of a drip.