I need help on creating a new screen cover. What type of materials could I use and what type of tool could cut the circles. I messed the original up its all scratched up now and worse then before. I used a razor and cut a thin plastic replacement out of a piece of scrap. It doesnt look good and the cuts are rough from the razor. What can I use and get at a local homedepot or online to made a new one, and what type of tool will be able to cut the circles needed. I have the original as a guide. If theres a way to fix the original I can try that but 120 grit sandpaper did it in pretty badly.
Creating a new IPV4 screen cover to replace mirrored.
- Thread starter vaperXant
- Start date
- th_trl_thread_readers 0
- Status
I'd used a microfiber cloth and wd40 to wipe the silver coating off of the one I had. Just taped off where I wanted the finish to stay on. Anyway try a hobby shop they sell lexan sheet in different thicknesses and lexan paint. There will be plenty of material to experiment with. A drill bit will cut your holes for the buttons just take your time with the drill.
I I got this reply from Vape Royalty...
Vape Royalty
We are trying to get Pioneer4You to sell us spare black IPV4 screen but have been unsuccessful so far unfortunately :/ We will continue trying to get them to sell them to us and will keep you posted. Sorry about this.
I guess It's time to remove the Mirror finish with WD40
I sanded the mirror finish off mine with 1500g wet sand paper. masked off the window and painted it black. let that dry for a day and clear coated it. again after drying for a week I wet-sanded and polished it with polishing compound. Looks like glass.
- Status
Similar threads
