This is my first and only tc set up, but I was using it at 30w at 430 degrees with the .5 coil for a week with no problem. Then the coil started flooding so I changed it to another .5 coil now it hits the tc so fast I can't even get a hit unless it's turned up to 550 but even then it hits tc fairly quick. I tried lowering the watts down to 20, even tried using my wife's cubis with a .5 coil and it's the same. So being new to this I am just wondering if this is normal or is there a issue with something?
Cuboid/Cubis problem maybe?
- Thread starter wardrum1
- Start date
- th_trl_thread_readers 0
- Status
550F seems a hell of a lot...try 100F less,see what happends 
I like my TC around 320-400 depending on type of juice
I like my TC around 320-400 depending on type of juice
Only thing I can think of is this:
Remove the tank.
Press the fire button until it shows no atomizer for few seconds. Sometimes it will just flash past.
Press fire 5 times to turn it off.
Turn it on.
Put the tank back on.
Press fire once or twice to get the new coil up message and press up for new coil.
Vape
I've had to do that a couple of times, but, knock wood, not at all in the past few days.
I tried all of that and still it didn't work, so I took the 200w update off and now it works great! (I think.) 30w at 400 degrees and it barely hits 300 degrees. Not sure why the update would cause this but 150w is way more than enough for me anyway.
I had inconsistent resistance measurements on the Bellus even with 3.0 firmware and 3.10 didn't fix it. The Bellus vapes just fine on the IPV4 and the Cuboid plays a lot nicer with single coil STM's.
So you're saying that the 3.10 update is not good and just stay with the original 3.0 Firmware ??
For me, the firmware update made no difference, positive or negative.
OK. Thank you both very much. I just NOW, Today received my Cuboid from Elev8. UPSP really screwed this delivery up. I couldn't rely on the tracking info at all this time around. Order placed Jan 22, shipped Jan 23 and finally got to me Today the 29th. Anyways, I can now start to experiment with the Cuboid and Tron-S in TC, then I'll get the Cubis Tank to try.
- Status
