Curious about buying a reo.

Status
Not open for further replies.

jkais3r

Senior Member
ECF Veteran
Verified Member
Nov 30, 2013
257
426
Mankato, MN, USA
What I would be interested in is the Reo Grand. I use only mechs as of right now, and have for a few months. My resistances are roughly .5 ohms on dual coil atomizers and roughly .9-1.1 on single coil atty's.

I have been reading for a few hours this morning, so please don't direct me to other posts (unless they directly answer my question). I read that there is going to be a sub-ohm upgrade coming for the reo's, is there an eta on that? I know it probably isn't going to be essential for me, but if I buy one this week without the sub-ohm upgrade, I know I'm going to end up paying $xx for the upgrade. I haven't had a reo since I started vaping so if it is planned to be released soon I may as well just wait.

I will be buying one, question is: now, or if the sub-ohm kit is coming soon buy it then.
 
Last edited:

Wickeddeuce

Ultra Member
ECF Veteran
Verified Member
Oct 11, 2013
1,069
2,027
JBLM
ok, all the parts are supposed to be in on the 14th, if you buy a reo now the upgrade kit will be 35 i believe is what he priced it at... i believe that it has also been said that there will not be a price increase...

the mechanical upgrades has all this information, if you order one now you might want to get a second one before the new kit comes out...
 

jkais3r

Senior Member
ECF Veteran
Verified Member
Nov 30, 2013
257
426
Mankato, MN, USA
ok, all the parts are supposed to be in on the 14th, if you buy a reo now the upgrade kit will be 35 i believe is what he priced it at... i believe that it has also been said that there will not be a price increase...

the mechanical upgrades has all this information, if you order one now you might want to get a second one before the new kit comes out...

You're guessing that they're all going to be sold out once the upgrade hits?
 

Hypatia

Super Member
ECF Veteran
Verified Member
Dec 6, 2013
893
2,234
Titletown, USA
Hmm, if you're happy at ~1.0ohm w/ a single coil setup, there's no reason to NOT a standard Grand right now. She'll certainly handle that resistance with ease (down to ~0.7-0.8 is safe, as well w/ proper batteries and caution, but you likely know that already). The RM2 atty performs brilliantly in the 1.0ohm range (IMHO) with a simple single micro coil w/ 28ga. The only "upgrade" with this setup is *maybe* a wee bit larger air hole needs to be drilled on the RM2. I haven't done this yet, I've found myself quite happy at 1.2ohms w/ stock air hole.
 

jkais3r

Senior Member
ECF Veteran
Verified Member
Nov 30, 2013
257
426
Mankato, MN, USA

Wickeddeuce

Ultra Member
ECF Veteran
Verified Member
Oct 11, 2013
1,069
2,027
JBLM
You're guessing that they're all going to be sold out once the upgrade hits?

no not at all... i believe that the reo without the upgrade kit is wild and amazing, i got a mini a little bit ago, i was planning on waiting on getting the grand until the kit came out... i got the grand i was wanting... ill just get the upgrade kit... i want more grands...

reos are wild...

im just saying... i dont think they will run out... maybe after pbusardo does the reo review... but who knows? i dont...

if everyone knew how awesome the reo is... well
 

Papa_Lazarou

MKUltra Member
ECF Veteran
Verified Member
Aug 23, 2013
5,867
21,663
Gabriola Island, Canada
Hmm, if you're happy at ~1.0ohm w/ a single coil setup, there's no reason to NOT a standard Grand right now. She'll certainly handle that resistance with ease (down to ~0.7-0.8 is safe, as well w/ proper batteries and caution, but you likely know that already). The RM2 atty performs brilliantly in the 1.0ohm range (IMHO) with a simple single micro coil w/ 28ga. The only "upgrade" with this setup is *maybe* a wee bit larger air hole needs to be drilled on the RM2. I haven't done this yet, I've found myself quite happy at 1.2ohms w/ stock air hole.

yup - this ^^

I run 0.8 single micros w/cotton on a grand (30A batts) - no problem. The tiny chamber of the RM2 is the secret (IMHO). The vapor is thick, the flavour is max. The air hole enlarging (not that it really needs it) is trivial.
 

Rickajho

ECF Guru
ECF Veteran
Verified Member
Apr 23, 2011
11,841
21,763
Boston MA
Yes lol I began the verification process last night as other threads encouraged people to check in there. I wish I could at least see what's going on in there without being verified though.

Le sigh. Access to the classifieds is something a lot of people wish they had started sooner. Don't fret over it. If you had access but couldn't do any purchases yet it would only lead to frustration.

There is a point to that limitation on access. The verification adds at least some level of credibility to people wanting to buy or sell. ECF can't prevent outright fraud, but exercising at least that level of a check does help to keep outright scammers out of there. And it should go without saying but trying to buy or sell stuff outside of the classifieds on ECF is absolutely prohibited.
 

Raynman

Vaping Master
ECF Veteran
Verified Member
Apr 5, 2013
3,618
13,090
Marion In USA
I keep seeing everyone say the kits will be in on the fourteenth. This is wrong Reonauts. The kits will be shipped on the the fourteenth. Quote from Rob "The new contacts will be shipped to me on 03/14/2014 Once they arrive I will need a couple days to get the kits made up" I remember this because Pi day is special to me.
IMAG0054.jpg
 

Wickeddeuce

Ultra Member
ECF Veteran
Verified Member
Oct 11, 2013
1,069
2,027
JBLM
I'd wait for the upgrade kit if I were thinking of ordering soon. It won't be long, and it will be a nice improvement.

but but thats like a 2 to 3 week wait... i dont think anyone who wants a reo should be without one for any amount of time, excluding shipping that is...

.... ...
 

Wickeddeuce

Ultra Member
ECF Veteran
Verified Member
Oct 11, 2013
1,069
2,027
JBLM
I keep seeing everyone say the kits will be in on the fourteenth. This is wrong Reonauts. The kits will be shipped on the the fourteenth. Quote from Rob "The new contacts will be shipped to me on 03/14/2014 Once they arrive I will need a couple days to get the kits made up" I remember this because Pi day is special to me.
View attachment 311516

my apologies i thought rob had said he should have all the pieces in on the 14th... could have sworn it said that... oops...
 

Hypatia

Super Member
ECF Veteran
Verified Member
Dec 6, 2013
893
2,234
Titletown, USA
I keep seeing everyone say the kits will be in on the fourteenth. This is wrong Reonauts. The kits will be shipped on the the fourteenth. Quote from Rob "The new contacts will be shipped to me on 03/14/2014 Once they arrive I will need a couple days to get the kits made up" I remember this because Pi day is special to me.
View attachment 311516

Mmmm, images.jpg
 
Status
Not open for further replies.

Users who are viewing this thread