I have a 2013 Cyclone. What size are the post screws? Can I replace them with Rm2 screws? What size is the allen wrench. Thanks,Dave
Cyclone Question
- Thread starter spada
- Start date
- th_trl_thread_readers 0
- Status
Yes, I replaced mine with rm2 screws. They work great. I don't remember the allen size though...
I have some knurled M2 screws that I don't need. PM me if you're interested.
Nice offer RuDawg...
I have 2 of the 2013 VA Cyclones on woodies. Run them with a phillips screw in the positive post, the original allen setscrew in the negative post for more clearance between them than you get with 2 phillips. A small PITA when recoiling to need two tools, but running RxW in them with a dedicated ADV makes recoiling/wicking them many weeks/months between.
I have 2 of the 2013 VA Cyclones on woodies. Run them with a phillips screw in the positive post, the original allen setscrew in the negative post for more clearance between them than you get with 2 phillips. A small PITA when recoiling to need two tools, but running RxW in them with a dedicated ADV makes recoiling/wicking them many weeks/months between.
My 2014 cyclone came with phillips screws and they are already starting to round out. So you all are saying the rm2 screws are the same exact size? I thought the heads of the rm2 screws were a little wider than the cyclone screws. My phillips screws are about as wide as the posts, so I'll still get pretty good clearance between the screws.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
I just ordered 25 socket head screws from e-bay and recommended driver that Train2 suggested. If anyone needs some of the socket screws I will be happy to share once they arrive. Thanks, Dave
- Status
