Danco ORing Co.

[mwa102464]

For anyone that may need Orings for there GG products the Danco company makes them and at there website Faucet Repair they have a list of suppliers. Today while at the home depot I purchased a bunch of small boxes of these for something like $1.97 a box and there is maybe 20 per box. When I got home they all worked great, I even found something new that I really like. I put a Danco #10 ORing on the bottom of my top tank the one that should normally slide into the connector tank (overflow tank) this #10 seats perfectly on the bottom tank but it's fatter and doesn't go inside the connector tank so when you screw on the top tank it seats perfectly when you screw the two tanks together, I found that it ends up giving me a way better vape with more vapor. I also found that I hardly even have to open my CR Ring, I mean I just barley break it lose, to a point where it's hardly even open, I am running an LR901 with this set up but I'm pretty sure it will work just as good with an HV Atty. Just wanted to share this info with everyone and let you know I am finding it to be a better vape than the original ORing that goes inside of the connector tank.

MWA102464

 

[Aceyboogie]

Thanks MWA!!! You're a lifesaver!!

 

[mwa102464]

No problem Ace, this should help many of GG Owners who need rings quickly as well as geting an even better vape

 

[skullfreak]

off to home depot i go.
thx bro

 

[mwa102464]

No problem Skull, just dont get upset if they dont have them all, I have checked my local Home Depot a few times and just yesterday they replenished the Danco ORings, they had every darn one I needed and some they even had the 2mm ones, even if your not sure of exact sizes just grab what you think may be close they are so cheap you almost cant go wrong, also look at my post about the #10 Danco for the Bottom ORing on the top tank, this has made a big difference for my AVS units as well

 

[VPDownunder]

Thanks for the tip, I found an oring the same diameter but thicker in a kit I had and tried it, definitely seems to produce more vapor

 

[mwa102464]

Danco #78 is the one that goes over the Atty, it is thicker and isnt letting fluid into my collector tank which is a big plus, all the danko rings are thicker which to me is key especially one wear and tear plus they seem to keep a better seal all the way around, I also just found one better then the number #10 for the bottom of the top tank that seems perfect now, these ORings have made my units seriously better now with no leakage into that bottom tank especially

 

[Rippspeed]

sweet... I have to go look for these at my home depot, because I'm really starting to hate the leaking into the collector tank

 

[Mauvemarauder]

Danco #78 is the one that goes over the Atty, it is thicker and isnt letting fluid into my collector tank which is a big plus, all the danko rings are thicker which to me is key especially one wear and tear plus they seem to keep a better seal all the way around, I also just found one better then the number #10 for the bottom of the top tank that seems perfect now, these ORings have made my units seriously better now with no leakage into that bottom tank especially

mwa102464,

Would you be so kind as to pass on the O-ring model number you have found that is "better than the number 10 for the bottom of the top tank"?

I'll be going to Home Depot this week... Thanks!

 

[Rippspeed]

Yes mwa102464 can you post a part number... Do these come in a box or in single units... And if possible can you take a pic of the oring installed, thanx

 

[harpo]

Yes mwa102464 can you post a part number... Do these come in a box or in single units... And if possible can you take a pic of the oring installed, thanx

Ripp they come in a box of like 8 or 10.

 

[mwa102464]

OK RipSpeed, the Danco #78 definitely works way better then the stock ORing the goes over the Atty, I have been vaping a brand new full tank with a new LR901 OF Atomic cinicade since last night and all day until now, there is NO LIQUID IN MY BOTTOM COLLECTOR TANK.!!! NONE AT ALL. These come in a clear plastic box about 1-1/2' wide by 3" TALL and have a blue background on the bottom half, I don't have the number right this second on the bottom tank one, I have to go back to home Depot to get it the paper in the package I threw away like a full, but I will post it tomorrow for you all, I don't even think that one is now needed since this number #10 Danco ORing is doing such a darn good job, it's just a thick better ORing then the stock one Imeo uses but let me tell you something it makes a world of a difference to me so I'm sure it will to you guys as well, I mean all night last night until now and nothing is in my collector tank, it's working flawlessly !!! I will post a picture of the package next

 

[mwa102464]

Here's the pkg of Danco O Rings guys Like I said they are available at Home Depot and numerous other suppliers, in my other post there is a link highlighted when you go to the Danco site they have a list of suppliers there as well, These all look to be a good quality O Ring, better then the stock ones and this #78 is for sure or at least doesn't let fluid in my collector tank, I will post the Danco I am using for the Bottom of the top tank tomorrow when I have a chance to hit Home Depot

 

[Rippspeed]

please do MWA ...
So you replace the oring that goes on the atty correct and replace the one that seals the avs and thr collector... Can you please post pics of the oring installed. Just for us people who cant visualize good ( like *cough* myself-phhhh *cough*)

 

[mwa102464]

Rip,

I don't have the time right now to take pics,download, and post sorry buddy, it's real as easy as ABC, FORGET about the top tank lower O Ring for now, Throw on that #78 slip it right over your Atty and screw it into the bottom of the top tank where it goes, ALL DONE, you will have NO JUICE in your collector tank anymore accept maybe the one drop when screwing it on. End of story Buddy. The vape sessions will now be nothing but great taste with plumes of vapor.!!!!!!!!!!!!!!!!!!!!

 

[Rippspeed]

Rip,

I don't have the time right now to take pics,download, and post sorry buddy, it's real as easy as ABC, FORGET about the top tank lower O Ring for now, Throw on that #78 slip it right over your Atty and screw it into the bottom of the top tank where it goes, ALL DONE, you will have NO JUICE in your collector tank anymore accept maybe the one drop when screwing it on. End of story Buddy. The vape sessions will now be nothing but great taste with plumes of vapor.!!!!!!!!!!!!!!!!!!!!

Sweet bro ... so its #78 is thicker as well as #10 ???

and you mean by leaking into the collector ... is it leaking thru the atty hole or somewhere else...

 

[Rippspeed]

Ok I found the part numbers for Danco #10 is Model 96727... I'll try to find the part number for #78

 

[Rippspeed]

MWA;
No dice @ HomeDepot on the #78 orings but I did find the #10 and because you said never mind on those, I didnt buy them